Search results for query: *

I have owned this car since 1980, I was 16. I have spent a lifetime building it. I have spent a ton of money over the years, over 30K just on the R3 engine build and install. The drive line and suspension is very custom built, Coil over front and rear, custom built chrome Molly K member Rack and...

UP Date on my weekend. Car ran excellent, clutch gave me some grief slipping in 3rd and 4th, but on the trailer after every pass and started adding counter weight. third time lucky got it to stop slipping. I ran a 1.422 60' ET 9.99 @ 130.74 mph my best 60' 1.420 best mph 132.68

Here is a vid, I ran a 1.43 60' 6.58 1/8th 107.8 mph I only got 3 passes back to back and no adjustments between passes. I thought I was spinning in first and sec but it does not look like it in the vid, what do you think, do you think there is more in it yet. ‪Steve Barton in his...

Some of you no my car and I'm sure are wondering what is going on with it. Well I finally got to make a few passes at a small track at a Airport strip 1/8th mile. I only got three passes, they were back to back so no adjustments made at all.. The car came out spinning in first and sec but it...

Some of you might no, but this is my knew R3 engine, in my 71 Scamp 4 spd car 416 cubs indy heads, 360-2 cnc ported built by rayanj indy intake 1.65 T&D rockers, bullet cam, 700 lift 11.30 comp Diamond pist,scat pro comp lightweight drag crank, 8" adj Advanced clutch ***. clutch and flywheel...

Well I'm about to start Assembling my new R3 Engine, its the Retro 340 Siamese block # 5153478AB. It is bored to 4070 Scat lightweight drag crank, scat rods Diamond piston, compression came in at 11.25-1. Indy heads, Indy intake, Roller cam, T&D rockers 1.65-1, This exact build dynoed in at 675...

Just sharing my Tube front end I just finished building to support my knew R3 416 cube Engine I am also building. You can see more pictures in my photo gallery.

I could not decide on a K member so I built my own. I am missing the pictures of the final assembly before I took it apart for painting but all the part are from Chris Alton Chassis Works , Rack and pinion and the coil over shocks, spindles and lower control arms. The upper control arms are A...

I am building an R3 retro 340 engine, (416 ) 4"Scat Pro comp drag crank, scat H beam rods, and Diamond pistons #51007 4.070 bore. I will be running the Indy 230-2 heads 2.10 intake valve a bullet roller cam 268/276@ .050" with around .680" lift at the valve. that's with the T&D 1.65 rockers. Q...

This is my same eng combo as in the Dyno Vid http://www.youtube.com/watch?v=EfNbPyL12zg

This is one of my Dyno Passes with the 360 Engine http://www.youtube.com/watch?v=Pv_KaqyeVkw

I have a 71 Scamp 4 gear car, I am running the 833 Aluminum case built by Liberty it is Pro shifted 23 splin input. Looking for advice on Flywheel and clutch choices. The car is 3000 lbs with me in it, 4:88 gears 29.5 tire I may go back to 4:56s R3 eng 416 cubs Indy 360-2 heads built by Ryan @...

I am building a R3 block #P5153478ab and I am looking for any help that is out there, does this block need any oiling mods ect. my parts list that I have from Scat scat crank #4-340-4000-6123-2(xs) light weight drag Eagle rods #2-360-6123-2124A(xs) W- 2000 ARP bolts Dimond pist...

I have been looking for a dragster style oil pan for my R3 block I have built a tub style front end for it from chris alton chasis works and I would like to run a rear sump pan I have tryed the most popular company's and no have got. Any sugestions.???????

Hi every one I am new to this site I have been racing my 71 Valiant for about five years and have finally blowen up my 360 engine with NOS. I am now building an R3 block I have a light wieght drag crank 4" strock from Scat Diamond pistons and Eagle rods with the 2000 bolt kit. Q: Is there...