Search results for query: *

I am seeking the 7 dash fasteners with the nutplates that slide onto the dash fastener holes to hold the instrument panel securely in a 1967-1969 Plymouth Barracuda with the Rally Dash. I heard Classic Industries has them but the pics show a hex bolt fastener rather than a Phillips screw head...

I am seeking 7 dash screws with their respective nutplates that fasten the dash to the interior frame of the car for a 1968 Plymouth Barracuda. Might anyone have these to spare and if so, How much would you want to sell for. Needed ASAP.

I've purchased a quick ratio manual steering box about 6 yrs ago and since purchase it has had excessive play that is friustrating when driving, especially when alignment issues are bad. With the car alignment in good order, the play is still evident although the car doesn't pull as bad and is...

My Steering Coupler is too short. Are there aftermarket couplers that are longer or does Mopar make longer ones for the manual gear box? I need another 1"+. My coupler disassembled when installed on steering box.

I'm in the process of rebuilding my lower control arms and have heard of upgrading the strut rods for better steering reaponse/cornering. I'm wondering what differences there are between the hotchkiss ,and the PST adjustable rods and how they compare to stock. And also the reason for adjustment...

It's been years, in my late teens/early 20's.... I tried to change out my turn signal switch on my own with no true knowledge other than being mechanically inclined...(Take it apart, put it back together the same way) Though I never got passed taking the steering wheel off and disconnecting the...

What is the proper torque for Rocker Arm Assemblies on Aluminum Pro Comp Heads?

Is the Magnumforce bolt on frame connector good for a stroked 340 to 417 CID? Will it keep the unibody from twisting on hard drag racing launches. Will it also take the abuse of wheelies when the car comes down from the front tires off the ground? Are they good enough just to be bolted on the...

Working on restoration of my instrument panel and gauges. I took off all visible screws but the panel still wont pull out. What am I missing? I'm thinking it should even come out an inch or two without disconnecting the speedo cable or electrical, but it's as though there are other fastener...

I'm seeking the interior trim pieces that go around the periphery of the interior door panel that separates the trunk from the interior of the barracuda fastback 1967/1968. I misplaced mine years ago and now wish to finish with laying carpet on the door but missing these trim pieces to hold...

I Have a mild build on my 340 '68 Barracuda fastback with Summit Racing intake, 650 cfm double pumper, Pro Comp Heads, roller rockers/lifters, Speed Daddy headers with 1.5 inch tubes,. It ran 13.58 in the 1/4 mile with 3.55 gears. I had it Dyno'ed @318 HP to the wheels and roughly 300 ft-lbs of...

Anyone have Speed Master ProComp Heads with Doug Headers? If so, did they fit without much issues? I keep hearing they have better ground clearness than TTI Headers

My '67 Barracuda with a 340 needs an upgrade on intake/exhaust. I've decided to go with the Edelbrock RPM Air Gap intake and want to get the TTI headers but when I called TTI, they said they have no knowledge what or if they would fit due to the Pro Comp Heads I've installed... Does anyone...

Does anyone know where I can get a good pair of the rectangular exhaust tips found on the '69 Swinger 340?

I've had this issue before on a 1969 Dart 340 Swinger. Where the headlamps would not stay on. They just randomly flash on and off during the course of driving at night. Now on my 1968 Barracuda I'm encountering the same thing. What would cause this? Is it a short somewhere? If so, Where? Has...

I'm going to put my car into paint during the memorial day weekend and have two ideas in mind. Wondering which one may look best. Please give me your thoughts between these two pics.

I remember back in the late 70's, Water injection was used to relieve pinging (detonation) and you were able to advance the timing moreso on the higher compression engines. I don't hear of water injection anymore; What happened to this idea as I remember it surely worked well and increased gas...

Rechromed individual letters for 1967 barracuda nose P. L. Y. M. O. U. T. H. The letter L has the longer pin missing/broken off that aligns/retains letter on panel. All other letters are good and intact. Does not come with attachment screw nuts. Paid $80.00 to rechrome set. $75.00

So upon taking my 1967 Barracuda grills apart from the chrome encasing in order to rechrome and repaint the assemblies separately; I've come to notice a difference between the two black grill pieces and I did not take notice of it until after I took them apart. One of the black pieces have a...

Is it possible to move my thread I made of my restoration,. into my Garage? If so, How is this done?

Does anyone know where I can find new gaskets for my hood emblems for my 1968 Barracuda? I can't seem to locate new ones.

I am getting close to putting color into my restoration and would like to know some of your thoughts/ideas. Although I'm pretty set in my choice, if you see something I don't that might be looking odd or off a bit, please give me feedback. I decided on a candymax orange color with a pair of...

1968 Plymouth Barracuda slant 6 automatic on the column. upgraded to a V-8 340 4-spd with 3.55 sure grip rear end in 1980. I believe I tried this previously but here I go again; I bought this car in my latter years in High School, As seen in the pic. Wow! $600.00 This car, originally Gold, was...

I have rebuilt my engine through a machine shop that upgraded my heads to aluminum with much bigger ports. I wish I knew what the specs meant. The car dyno's at 320 HP to the wheels. I have a 650 double pumper on it. I'm thinking of buying a complete aftermarket 6pak setup. I think from Herbs...

Anyone have any ideas of installation of a good aftermarket rear window defogger elements or even a heater/blower that can be attached somewhere back there that would look ok to defog/defrost rear window on those humid mornings? Also; how many moulding clips are necessary for the rear window...