Search results for query: *

Kind of a long story but it might help with getting a answer. So I bought a 71 plymouth scamp 3 years ago to build a nice drivers car. I've been working on it and getting upgraded parts for the car, and wilwood brakes was my first upgrade. I call wilwood and spoke to one of the techs and he gave...

As the title says, I'm not sure what its called but it the plastic piece the lock is in on the glove box.

So I have a 71 plymouth scamp. I need a wire that is both hot with key on and in the cranking position. I've multi metered every wire coming from the ignition and non fit the bill.

Anyone else need to bash in one of the runners to get the tti headers to fit.

So I'm going from a 318 turbocharged to a gen III 5.7 hemi out of a 2012 ram 2500. I'm in the process of getting the parts together and the pan and oil pick up came in. But call me crazy but the oil pick up just doesn't look right.

I have a fully forged internals for a 318 small block some are interchangeable with other engines. Eagle crank stock stroke brand new never installed $650 Eagle H beams rods stock length brand new never installed $380 wiseco pistons 30 over brand new never installed $480 new set of main and...

Anyone have a suggestion for a different drivers mirror, the factory circle one seem pretty much useless, its for a 71 scamp.

71 plymouth scamp, I need some window parts. For the front two I'm looking for the plastic/felt piece that goes on the glass and then slides down the track at the vent window sorry dont know what this part is called. Then I need a roller kit for the quarter windows anyone know a good site.

Ok where to start. I've been working on my 71 scamp for almost 2 years now, just updating things in hopes to make it some what reliable. So here's the break down, its got a 1980 318 with 360 heads not sure on cam probably a stock 360 but I'm not sure I bought it this way and the guy didn't know...

So after along time I finally got my car on the road. I have a 318 with 360 heads, 76mm single turbo running the fitech power adder 600. The car is running really rich even though my fitech is showing that its running its target afr's. When I drive the car my eyes literally burn from the exhaust...

I have a 71 scamp with a 318. I have the fitech fuel injection, 360 heads I'm assuming the stock 360 cam not 100% sure though. I'm going through and setting up the fitech for cold starts which is now doing a lot better, but after the engine warms up to temp and I try to restart the car the...

Got a 71 scamp with a 8 3/4 rear end. After installing new rear quater panels, hotchkis leaf springs, hotchkis shocks, and hotchkis sway bar it seems my rear end is around .5 to .34 off toward the passenger side. Got a set of 17/245/40 wheels and tires now the passenger side rubs on the inner...

I have a set of trw 30 over pistons and some stock stroke superods for sale. Pistons are 12.5 to 1 compression. They were balanced and still have the pencil marks on the pistons when that was done. Looking for $500 shipped.

I have a fitech system on my car, it has a 318. With the pedal to the floor the fitech only goes to around 3/4 open throttle. It seems the stock cable/pedal wont go far enough to go full throttle. Any suggestions.

I wanted to upgrade my small radiator to a aluminum one, Jegs had their brand on sale and it says direct fit. So I bought it installed it but it seems to be sitting lower then it should not sure if its going to cause a issue or not. If I move it up to the next pre drilled holes it will be...

im posting this for a older gentleman that doesnt know much about the internet. he has a 1969 dart special for sale. it has 21,386 original miles, factory 318, interior is almost perfect there is a small tear in the drivers seat. the exterior did get a respray back in the 70's couple small dents...

i have a set of super rods aluminum connecting rods and some trw 12.5:1 pistons out of a 340. the story goes, the motor was built back in the late 70's and put into a drag alter car made a few passes and them pulled out and a hemi was put in its place. the rods have already been balanced and so...

So Im in the process of putting wilwood disc brakes on the rear of the car. I took my axles down to have the lug nut studs moved to have 5x4.5 pattern. He also installed a set of green bearings on the axles they are mo400 bearings. So I installed the drivers side brakes and everything went well...

What is the best combo/adjustments to get the most traction at the rear tires for a launch. Right now I have hotchkis adjustable shock in the rear and non adjustable up front. The hotchkis sway bars front and rear. Soon will be getting the hotchkis leaf springs. This my first front engine rear...

Anyone out there with a new dodge charger. I need the dimensions of the backseat width, depth, and total height.

I've only had the car since november of 2015 so I dont know what has been done to the car. It has a 727 torque and a 8 3/4 rear end. When I put it in reverse it makes a big thump and it lunges backward, and same when I go into drive. Even when the brakes are applied it moves kinda like getting...

I'm looking for some 17" wheels for my car, a 71 plymouth scamp. Most of the wheels I'm finding are in mm. My rear now is a 14x70x245 and my fronts are 17x70x225. What offset do I need for my rear and front for 17" wheels.

So I ordered a wilwood front disc brake conversion kit for my 71 scamp. I was doing the install the other day and once I got my old drum brakes off I installed the plate that bolts to the old spindle. I built the disc hub assembly and slid it on, but it hit the spindle plate and it didnt leave...

Picked up a 71 plymouth scamp with dodge dart body parts on it. Heres what I'm starting with. First thing I did was tear apart the front end it was all over the road when I went over any depressions in the road. Found all the ball joints where bad and both the outer tie rods where bad. The...

Having some wiring issues with my scamp. Does anyone have a link or know the wiring coming from the bulkhead under the hood. I need to know what color wires go to what. The previous owner has it all hacked up.

Hey everyone, just wanted to introduce my self. I just picked up a 71 plymouth scamp, it has a mild built 318. The frame is 95% rust free with only 2 small spots on the front sub frame that will need to be addressed. The body has a few visible rust areas nothing to bad though. This is my first...