Search results for query: *

What is the name of the guy that builds engines on these pages. He has written tech articles and you can subscribe to him. I have bought the kit to correct push rod angles on a small block from him. Whats his name and username. I think his first name is Mike. Its driving me mad trying to...

Why the slots in this nut which is original from a rear spring shackle/hanger. I assume it has something to do with gripping better to bolt and prevent unwinding but not sure. I notice now many aftermarket spring hardware comes with nyloc nuts instead of these slotted nuts.

I need to remove my transmission and I have the 1 7/8 TTI headers and TTI exhaust H pipe. I think I may be able to get it out by just removing the RH header which is a lot easier than the other side. Anyone done this and do you have any tips.

I bought one of these from Rock Auto and fitted to my 73 Duster and it leaked. Got a replacement sent just fitted that and it leaks worse than the first one. Not just a slow leak either totally drained the reservoir in less than 24 hours. These are supposed to be pressure tested which cannot...

Looking around on you tube and saw this clip from 2 Lane Blacktop. Old school Duster flopper really cool. Brought back memories of applying your own VHT at the track. I must watch this movie and embaraased i have never seen it.

Went to the docs this morning wearing my Mr Norm Shirt which has a logo of rams head on the front. My Doctor kept looking at it and then said you know that logo looks like a womans Uterus and Fallopian tubes and to make matters worse it has a panther pink stripe down the front. F##K thanks...

Stumbled across this on Craigslist. Anyone used one of these or know much about them. INDY injection for crys. 440 big block mopar

If anyone has a parts book can you please give me the OE part numbers for axle seals please.

Some of my stuff has to go as Im tripping over it. Anything worth saving here?.

I bought this engine around 3 years ago and now ive got around to do something with it. The guy I bought it from said it still ran when pulled from a Ram but had a burnt valve. Im going to pull heads obviously, however I have read that these can suffer from valve train issues such as valve...

My brother raced his 451 on the weekend and I want to share what it did and get some thoughts. It is in an E body and on the weekend we raced it. It ran 11.70 at 115MPH however it was on the limiter 200 ft from the finish line. It also has traction issues because it only ran a 1.7 60 ft...

Had Christmas dinner with family and I was wearing a Mopar Direct Connection T Shirt and my mother looked at me and said didnt know you were a One Direction fan. Looked at her strange and she said is that a One direction shirt. Kinda creepy as I am a 50 year old man. Mothers you gotta love em!

I started my new 408 on the engine test stand. Sounds Sweet!!. Now heres the dumb part My brother and I built the 727 3 months ago and for some reason I thought I had filled it with tranny fluid back then . Well you idiot you didnt, and I started the engine idled it up checked the timing etc...

It seems every manufacturer now does braided hose. Is there really a big difference between brands. Say Summit V Russell?. Is there a major difference in quality if running oil versus transmission fluid thru these hoses?.

I tossed up weather to buy March Pulleys or not. So glad I did now after the install, I think it looks good. I did have to make a 3/4 inch spacer for the crank pulley but all good now. Very happy!!

In the last couple of months I have ordered Mopar performance stuff from a Dealer. Both orders were delayed. The first order was a 3 week wait and the 2 order was backordered for 1 month. I wasnt ordering engine blocks or heads just a few dress up items and a starter motor. Obviously...

I Emailed Mancini to buy a Griner valve Body and this is the response I got below. Hello Griner is no longer in business. We do have the Turbo Action valve bodies though. Thank you for writing Rob Cunningham Mancini Racing Manciniracing.com...

Is it possible to take a Magnum roller lifter apart. I have taken the top clip off and removed the top cap. I believe the spring is under the bottom plunger which I cant remove. Any ideas? I want to make it solid so I can check my pushrod length.

Hi Folks Just finished putting stripes on my Duster. I went with contrasting colours and I think it looks good. I went with black vinyl roof as the original white in my opinion doesn't look very muscle like and then I wanted the body colour to pop so went with the white stripes. What you...

Here is a data sheet of 2 5W30 full syn oils. Is a higher or lower viscosity number a better oil?. Opinions on which is the better 5W30 oil below?. 1st Oil Viscosity at 40 Degrees C = 61.7 Viscosity at 100 Degrees C = 11 Vicosity Index = 172C Flash Point = 230 2nd Oil Viscosity...

Who sells these. Looked at all the usual places but they all end at 1972

Some people just got to much time!!

My brother and I are coming from Oz for Mopar Nats and Woodward DC. Got our accommodation booked for Mopar Nats however want something for Woodward. My research says I want something between 11 and 14 mile rd Birmingham, Royal Oak however we will be legging it everywhere so we want...

My valves have the 3 groove locks and I cannot get a 1.6 - 2.2 mic or a 1.4 - 1.8 mic under the retainer. Anyone else had this problem. Is there an even smaller mic than these that will do the job for me. I'm finding this extremely frustrating.

Hi Folks My brother and I are coming from OZ to Mopar Nats. Found a reasonable priced hotel Travelodge 5920 Scarborough Blvd Colombus OH. Has anyone stayed here and is it very far from the cruising at night. Also how far approx from the Raceway.

I was sold mopar P5249706 freeze plug set for 360 magnum however I think maybe it is incorrect after installing most of them. I have left over 1 x 1 5/8 - 1 1/4 - 1 7/8 disc type and a 5/8 threaded plug (yes I have installed the plug in distributor pocket). I have missing the 2 cylinder block...

Drag Week 2013: 14,000 Miles from Australia to Drag Week, John Farone Explains on Day 1 - YouTube

Does Clear Coat Go Off Today I mixed some clear coat up to do some repairs. I have had it sitting on the shelf a while and when I sprayed it it came out of the gun like string. Dumped that and mixed up some more from a newer can I had and it sprayed beautiful and smooth. Does it go bad if...

Hi Folks Member D55dave donated me a set of 73 Duster sail panels and I agreed I would persue prices on getting them made. I firstly approached a company here in Australia who quoted me on getting a Die made. Wait for it $130,000.00 and the panels after that $10ea. This would be an...

I tried to buy a seat belt from a Chrysler dealer for a late model Dodge and they wont ship because the deem it to be dangerous goods. Any one heard this before.