Yes! Go back and read the original post. We're working on a 318.I'm Probly missing something, a stock bore x stroke 318 is not within %1 of 360...or did I misunderstand something.
YES valve-shrouding will be an issue.
I can't watch this sh*t show any longer...
A 2.02 intake valve on a 3.91 (or any over-bore possible there-of, even a 4.04" for goodness sake) cylinder wall with a low-RPM cycle (1200-2200) will SUFFER from lack of velocity with that big of an intake valve on a street car. Especially a 318, god*amn.
WTF, does everyone on this site assume people still race around the street like dick's from 1977 still or something?
2.02 intake valves were cool when 4.56 gears were too... at the f****** Sonic Drive-In back in '85 , dumb-dumb's.
Maybe he is. Maybe he is stuck in the '70's & '80's! He's crankin out the Zeppelin & Iron Maiden with a Gid aweful mullet and ripped jeans and a tiger stripes bandanna!!!
And after the drive in and chasing the chicks around the burger table, he's gonna race the back road strip. Gonna "kill'em all" with his insane in the membrain 318.