Good for you. You made it this far you can do another day. Cravings only last a few min. Keeping busy really helps.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
36 pages to backread? Nope. I hope all is well. Back from Knob Creek, what a great time. Me, Dad, and my boy. Tons of shooting, good to see old friends, made new friends, and many memories.
@dukeboy_318 - your dad's name Alan?
@dukeboy_318 - your dad's name Alan?
and drank some of that too!
Unconventional
Well-Known Member
The forecast wind is taking the morning off for the time being. In it's place it sent it's buddy Fog. Can't hardly see across the street.
Finally got a negative test today! Howdy all.
Good to hear.
Lost interest in the day. Thats 2 in a row.cool and rainy so im just not interested.
So I cut two pieces of aluminum like this. One for each door. Then put a good bead of black RTV on the sealing surface. Then I placed part on an downward angle to the rear. Then screwed them in with three self tapping screws. I think this will fix issue
So went out for a while, got the 50 merc inside storage building. Now i can lift intake off and see if i can get those pesky valves moving.
Unconventional
Well-Known Member
We got to the 40mph winds mark 
Now it's workin' on the 50 mark 
Now it's workin' on the 50 mark
Calm here. Well,maybe a little breeze.We got to the 40mph winds mark
Still cloudy and intermittent rain here...Sucks !!!!
Rain stopped... so stupid me pulls out the powers washer and scrapes chisels and blasts the deck. It had that decksaver stuff on it and was off in sheets.
Now if it ever dries out I'll hit the bad spots with a belt sander and get a good coat of stain down.
Still need to sand the rails. One side needs to be pulled off and rebuilt
Now if it ever dries out I'll hit the bad spots with a belt sander and get a good coat of stain down.
Still need to sand the rails. One side needs to be pulled off and rebuilt
Sorry...Can't Like That !!!!
That's OK. I didn't like it either.
- Joined
- Mar 17, 2018
- Messages
- 13,363
- Reaction score
- 30,352
Folks always panic when they see us drop stinger in the bucket of water! It is just so much easier than wearing two gloves on one hand.View attachment 1715804040
Symons cone crusher head. In operation it has a replaceable liner over it. When the plant operator has his head up his rectal canal and doesn't check them the liner often fails. Liner contacts that raised surface there at the bottom of the cone and has a has a huge nut on the shaft that protrudes through that hole in the top there, the cavity between the liner and head is filled with epoxy backing material after assembly. I could hear the liner ringin' like a little bicycle bell whenever the crusher was empty. Not my plant, not gonna worry about it. Rock heads finally caught on to it. They took it apart found big crack in liner and no backing material behind it. They got the liner off and found that the sealing surface there at the bottom was no longer usablefor the next liner. Poured the backing material in after they had the new liner on and it ran right out the bottom
Sounds like way too much fun. You’ll probably need to spread it out over a couple weeks.
Sounds like way too much fun. You’ll probably need to spread it out over a couple weeks.
Haha. Yeah really.
Figure the weather will mostly decide for me.
I do need to get firepit beta version 1.0 going.
@halifaxhops for those times you need to become more efficient..."hoptimized"
Last edited:
Afternoon folks, dry around here but calling for that four letter S word on Thursday.
Ewwww…
-
