Going to try these

-
Lol. We are all suckers. My buddy called my other buddy and said are you ready for another dog (his dog died last year). He said no and his wife said no then they said can we go see it anyway. Here’s their new dog.

BFA79A64-7CE3-4884-A392-FF7F7036F0CA.jpeg
 
For the most part I shape a short turn from the valve bowl side just like Pittsburg racer... but I also have to go in from the window side to knock down the hump and finish the shape off. It lays back imo too much trying to finish off from the bowl alone.
.at least for ME.
So all of the burgers I buy have a long shank I want to say 8" or something that I cut 2.5 off...
I also like to take the piece I cut off, grind it to a point and use it as a punch.
 
Last edited:
For steel and iron. If you use them on aluminum they will plug up.

CB3L-A_1 mac tools.jpg
 
toolmanmike said:
These are for aluminum, brass, etc.

View attachment 1715857373
Click to expand...


What I have is said to be more aggressive than what you’ve posted. I’ve got some tunnel ram porting coming up and I want to get as much material off as fast as I can. Plus, I have a set of Edelbrocks out there I need to clean up so I’m going to start on those with these cutters.
 
I kinda laugh when guys say double cut burrs clog up. These are all used burrs and I do 98% of my porting with double cuts. Stretch the picture and look at my burrs closely. Dip and grind.
D481181C-73A3-4A24-A725-764C80468819.jpeg
 
Rat Bastid said:
Ok, this happened. I’m going in the shop regardless tomorrow.

View attachment 1715857347

View attachment 1715857349

View attachment 1715857350
Click to expand...
Rat Bastid said:
Nope. My wife had to meet a client last Sunday about 2.5 hours away so I drove her. We pull up the driveway and the first thing I see is a big, fenced in pen with a chicken coop. And then 7 little puppies come running around the coop. They were outside, in the cold, nasty weather. It pissed me off. They aren’t running a puppy mill, but IMHO the conditions were horrible. In fact, the litter was born 11/16/2021 and we took her home 01/16/2022.

I wanted to bring all 7 home, but I didn’t have 1400 cash on me. Plus we got her for 150 instead of 200. Somehow, she got out of the pen. Over the fence, through the fence...under...I don’t know. But she got out and was just full of it. I could have written a check for all of them but I have as of late pulled my head out of my rear and learned I lie to myself when it comes to stuff like this. I would have got them all here, got them their shots and all that and then they’d never leave. I couldn’t let them go.

So I sucked it up and just took her. I can’t save them all. But I saved one.

I put one of my dogs down 08/14/2021 and I told the wife NO MORE DOGS. But, this happened.

I’m just dumb I guess but animal abuse comes right after child and women abuse. So she will have a good life. We are thinking about going back for one more, but if I go up there I ain’t leaving without whoever is left.

Thank God they are that far away or I’d have already gone there.
Click to expand...



Australian Shepherds will do that to you!:lol:
 
Good thing I don't have a bunch of stray dogs around here, I've already took in 6 more cats than I came with.
 
You must log in or register to reply here.
-

Back
Top