I'm trying to save $ on my 400 To 451 or 470 build I plan to Port some 452 heads, get her going and bolt on some Trick flow heads later
I'm hoping for 280 cfm at .550
I'm hoping for 280 cfm at .550
Well good luck with it and keep us posted!I have two sets , practice on one
I'm prepared to research it , buy the tools, and ask advice
For 45 yrs I've wanted to Port heads
1KMaybe PRH will chime in on this. How much money do you plan on spending on these heads?
Are You doing this with stock valve sizes or?I have two sets , practice on one
I'm prepared to research it , buy the tools, and ask advice
For 45 yrs I've wanted to Port heads
I'm trying to save $ on my 400 To 451 or 470 build I plan to Port some 452 heads, get her going and bolt on some Trick flow heads later
I'm hoping for 280 cfm at .550
You could Edelbrock E street heads for 1400 pr.Maybe PRH will chime in on this. How much money do you plan on spending on these heads?
For 45 yrs I've wanted to Port heads
Maybe PRH will chime in on this.
You would be better served ordering up a set from Aerohead and breaking out the burrs.
Might as well see if it’s as fun as you think it is.
Update they are 1517.00 per pair @ Summit. $300 jump in 2 years. I learned my lesson messing with iron heads, cost me a tear down and rebuild because they cracked.You could Edelbrock E street heads for 1400 pr.
You would be better served ordering up a set from Aerohead and breaking out the burrs.
Update they are 1517.00 per pair @ Summit. $300 jump in 2 years. I learned my lesson messing with iron heads, cost me a tear down and rebuild because they cracked.