Stop in for a cup of coffee

-
Just ordered a ridge reamer i will use... 1 time.
Oh snd be careful with it. It can take off too much in a real hurry. If I was to do it again, i would try to get the pistons out without it. If you are going to bore it, broken rings or ring lands don't matter. The machine shop will cut that ridge right out of there with the boring bar. JMO
 
Oh snd be careful with it. It can take off too much in a real hurry. If I was to do it again, i would try to get the pistons out without it. If you are going to bore it, broken rings or ring lands don't matter. The machine shop will cut that ridge right out of there with the boring bar. JMO
yeah... i watched some vids.. reamer was $50 so not that big of a deal.. just wanna try.
 
1744916879592.png
 
* if he painted the engine bay to body color..
I am not one to talk. My Demon is part yellow and part black. To be more inclusive. The Charger is to be green and white. Silver engine bay matches the interior - is that acceptable?
 
The longest drive in the Demon so far has been 286 miles each way with a tunnel ram and 660s. The first time on that trip it has a spool also.
nice.. it takes me a bit of time to trust a car.. i still have maybe 60 miles total on mine. gonna start driving it more though. Just called Terry brighton who builds strokers in ontario.. has a 600hp 434" 340 for sale right now.... i was just looking for a shortblock though
 
nice.. it takes me a bit of time to trust a car.. i still have maybe 60 miles total on mine. gonna start driving it more though. Just called Terry brighton who builds strokers in ontario.. has a 600hp 434" 340 for sale right now.... i was just looking for a shortblock though
The furthest I had driven the car before that first trip was 30 miles or so. Send it...
 
100 paper Plates @ Walmart (cheapest they have) $5.54
100 paper plates @ Menards $2.99
75 paper plates @ Aldi's $3.75
 

-
Back
Top Bottom