Recent content by 65mopar273

What if i were to use the 360 manifolds or if its best to use headers what size and type would be the best to use in my 65 valaint with the 360?

Ihave a 99-360 mangum i going to use in my 65 valaint an aftermarket intake and cam with the stock manifolds would that cut down on hp?:read2:

with the troble you run into running headers is there a stock manifold that i can run on a stock 360 with a aftermarket cam how much hp would i be loseing .:cheers:

:read2:With all the trobule and problems people have installing headers cut this or notch that an dont talk price is there a stock manifold that you can use on a stock 360 with a diffrent cam how much hp would i be loseing.

Hello i need a steering colnum for my 65 valaint without the shifter on the colnum my valaint is auto in the floor would a 73 up a-body work would it be the right length? Also i need a center sump oil pan for my 5.9 360 some say that a thruck or car oil pan will work but no one knows what year...

What would be the value of my 65 valiant signet 2-door with a 5.9 magnum an 904 auto in the floor ?I want to remove the crome and weild up the holes but a friend says to put the crome back on do these mopars have any value.:read2:

I have a 99-5.9 magnum that i want to put in my 65 valiant , a friend gave me a aluminum intake Edelbrock #2835139 LD4B this intake wont bolt up to my heads because the magnum heads have a straight down bolt hole an the intake holes are at an angle, now would heads from a 77 jeep with a 360...

:read2:what would be the horse power rateing on a 77-360 and a 99 5.9 magnum-360 which would be the better engine?

I want to put a 99-5.9 magnum in my 65 valiant , would this be an easy swap i plan on changeing the intake so i can run a carbuartor ,what about the 5.9 oil pan and motor mounts would they work i want to change the cam and the intake(comp cams thumper) and headers would about the 904 trans...

I want to add front disc brakes to my 65 valiant what would be a good doaner car? what parts do i need to remove from the doaner car,also who would sell brake line kits for my 65 valiant.](*,)

Some 65 a-bodies came with red interior would anyone know that paint code or color?:read2:

i have a 65 valiant and i want to paint it to tone(burdangy metilac and silver) does it matter which color goes at the top or which one goes at the bottom, i have been told to put the light color at the bottom to hide minor defects?:clock:

I would like to add something to my 65 valiant for the street hei, cam, headers, intake, carb, 58,000 org miles do i need to change the springs? do i need to change the springs,i was thinking of comp cam thumper(hdly.) cam set i like the rough idle .I though of changeing to a 360 but this runs...

WO WO WO did not mean to upset anyone i was just asking now i no thats a big NO NO ,so what can i do with my 273 any performance upgreads, is it possiable to change the carb, intake,cam, headers and get some extra power out of it or should i find me a 360 and be done with it?, the 273 only has...

Hello i am new to the mopar sene but not to cars in general this is my first mopar build so please help me out.i have a 65- plymouth valiant signet 2-dr no post with a 273 engine and i think a 904 transmission the body is straight with a few rust spots not bad at all believe me i have had worse...