Recent content by 68 340

  1. 68 340

    Tire Advice for 1968 Barracuda

    Barracuda with Rodlites. I do not have any pictures of my Barracuda with Rodlites. Agree 255/60 on the rear look good. Currently have Centerline wheels on the car. I rotate wheels for a different look every now and then.
  2. 68 340

    Tire Advice for 1968 Barracuda

    15 255 60 MT Drag Radials fit well on the rear with 15X8 4.5 wheels with 4.5 backspace. There is over an inch of space between the wheel and rear leaf spring on both sides. No rear quarter pannel to tire clearance issues as well (good clearance). I am thinking about 15 195 65 tires up front. It...
  3. 68 340

    CNC machined Six Pack air cleaners

    My father has a 440 6 pack E-body Cuda. He would love this air cleaner set up. Do you know if these air cleaners will fit under the hood of an E-body Cuda?
  4. 68 340

    Tire Advice for 1968 Barracuda

    I recently purchased Weld Rodlite wheels for my 1968 Barracuda. The car has 1973 design disk brakes and suspension up front and 4.5 bolt pattern rear end with drum brakes. Super Stock springs are in stock location. I am currently running 15 X 8.5 Centerline Autodrag wheels in the rear with 4.875...
  5. 68 340

    User Opinions On Mickey Thompson E/T Street S/S

    My car weighs 3450 with me in the car and 1/2 tank of gas. 3.91 rear, 27 inch tall tire and 4000 stall converter. 1/4 mile times are with full exhaust system. RWHP=390-400.
  6. 68 340

    User Opinions On Mickey Thompson E/T Street S/S

    Fisher --- my fish runs 11.3-11.5 @ 116 in the 1/4.
  7. 68 340

    User Opinions On Mickey Thompson E/T Street S/S

    I run the 255/60/15 on my 1968 Barracuda with a 416. I run 18 psi at the track. The tires hook well enough for me to run 1.57 60-foot times. I am happy with the tires.
  8. 68 340

    Heads up on tti header warranty

    Black Jack Alumacoat headers. I purchased a set in the mid 1980s. Great coating that lasted a very long time.
  9. 68 340

    [WANTED] 650 CFM Holley double pumper

    I have a 650 CFM Holley double pumper spread bore carb. It worked very well when it was on my 340. I have not used the carb in 30 plus years, so it will require a new gasket and rebuild kit. I will sell it for $50 if you are interested.
  10. 68 340

    [FOR SALE] Rear Seats

    What condition is the black seat bottom for the Fastback 68 Standard interior Barracuda in? If the rear seat bottom is in good condition (no cuts, tears, etc.) I will buy it. I live in the Metro Detroit, MI area.
  11. 68 340

    small block pulleys

    I am assuming that your 68 340 is internally balanced. If my assumption is correct, you have a few decisions to make. Is this a street only car? Street/strip car? Or race only? How important is an SFI rating to you? A few good SFI rated balancers are ATI, FluidDampr, and Pro-Race PRP. I have...
  12. 68 340

    small block pulleys

    We need to know what harmonic balancer you are using as well to give advice on the correct crankshaft and water pump pulley. Stock? Aftermarket?
  13. 68 340

    small block pulleys

    If you do not have the timing chain cover, radiator or water pump, go with the 70 and up style set up. The advantages are as follows: (1) The timing chain cover has the timing marks on the driver side of the vehicle. (2) You can use the aluminum water pump. (3) All of the parts (water pump...
  14. 68 340

    Hayden 2765 fan clutch, more room?

    I like a minimum of 1/2 inch clearance between the clutch and radiator. I have about 1 inch of clearance between the radiator and clutch. The fan is about a 1/2 to 3/4 of the way into the shroud.
Back
Top