Recent content by 73 dart

Any certain kind of briquettes? Regular or match light?

I have to ask have you took the bulb out of the glove box light? I have found that as a draw many times.

I bought a complete a/c kit from rock auto for my 06 dodge diesel, came with compressor,dryer,and orfice line. All parts were four seasons. 1 month later it got low on freon checked it and compressor was leaking in the seam where it was puut together. Rock auto repace the whole kit with another...

Did have 1 but i am sold out of everything now.

Just got a condenser from rock auto today. Was over $100.00 cheaper for the same brand and part number as in town. Ordered it Friday and got it today.

Looks like the fuel pup block off plate is leaking the bolts may be a little long hitting the timing cover. those cork gaskets are the worst for leaking.

I grew up with scouts learned how to drive in them. Started in a 62 with 4 cyld 3 speed and then dad bought a 66 v8 4 speed. The 62 4cyld 3 speed was very under powered but would climb the mountains in Colorado in 4x4 low very good. The 66 v8 had plenty of power but loved gas climb anything. But...

I was having a hard time with my 440 challenger hooking up off ofthe line. I put ladder bars on it with the super stock springs that I had on it and the 60ft times went from 1.68 down to 1.30 with a 10 inch slick.

I read a interview with the owners of the Denver track and they stated they were going to build a new track but were going to take 2024 off. Hopefully they don't get lazy on there year off and go through with there plans for a new track in the area.

The I would do it without a welder is to heat the block around the bolt (not the bolt) with a torch and when it is good and hot then spray with penetrating oil may take several tries. Then hit it with a hammer to vibrate the bolt and keep spraying with penetrating oil rinse and repeat. It would...

My question is was it running like this before you pulled the engine to fix the oil leaks or did it stat running bad after the engine was reinstalled? Just trying not to overthink it.

Fred I hate to see the outcome of the trial. I had a daughter do some time and it was hard to deal with but remember he will need help when he gets out. Hopefully he will get out at the minimum time with good behavior. Don't rush on the decision to get rid of the truck he will need something...

We are at 43 1/2 been a good ride.

Congratulation Mark !!!

The one for sale has folding legs