Recent content by Bret2094

I'm looking for a set of the 340-360 engine mounts to put a 360 in my 72 duster with a factory v-8 kmember (67-72). I dont have a set of the 318 ones to get altered, so I am looking for a set that has been altered or is factory. Thanks Bret

I scored a free 4 speed bellhousing, but it has the 4.35 size bearing retainer hole , and I am placing it behind an OD unit with the 5.125 size bearing retainer hole. To make it work, I plan on taking it to a machine shop to have it punched out, but I noticed that the holes that the fork pivot...

Thanks everyone, I've about got this puppy buttoned back up and the correct parts ordered. Tanking my time, but I want to ride:protest:...maybe by the 4th Later Gents Bret

Thanks for all the replies guys, It would appear I have a 360 mag on my hands. The casting numbers by the driver head is 360T0R1147, and the Drivers side block is 53020006-360. It has the motor mount places for both styles as well. Do these things have different flywheel/clutch setups to run...

I've been very busy lately fixing up my duster and pulled the engine for the first time, and just happened to notice the stamping marks are written 8-6-94. For the last two years , I have been ordering non magnum 360 parts such as water pumps, mechanical fuel pumps,spark plugs and various other...

Looking for Pedal cluster, zbar, clutch fork, bell housing and any other pieces needed for a Over Drive 4 speed conversion other than a trans,clutch disk, clutch plate, throwout bearing, shifter,shifter hump, and shifter linkage. This conversion is going into a 72 duster. Pricing is up to you...

I'll pull the pan and give her a good look see, but while its not working correctly I decided to give the pan a good overhaul that it has desperately been needing.(already have the new one) Since we are on trans issues , I though I would show y'all this crap A facebook group thought...

Just to answer an above question, I did not have the parking brake set. Took more than a day to get around to it, but I did reinstall the driveshaft and go fiddle with the linkage to make sure it was not in park, and attempted to drive the car down the driveway. Some really nasty grinding noises...

Sorry about that, I realize how that is confusing. I made an assumption that if the engine would turn without binding up and in gear, then I might be okay transmission wise. In the morning I will reinstall and see if in moves about as it should. I guess I was looking for things to be aware of...

Shutting off the engine and putting the shifter in neutral did nothing to unlock the rear tires, so it got removed. turning the engine by hand at the harmonic balancer while in gears causes the remaining upper ujoint and shaft coming out of the transmission to move. I did not want to run the...

Shutting off the engine and putting the shifter in neutral did nothing to unlock the rear tires, so it got removed. turning the engine by hand at the harmonic balancer while in gears causes the remaining upper ujoint and shaft coming out of the transmission to move. I did not want to run the...

I am really quite unfamiliar with the terminology and all and did not realize the transgo tf3 was a manual valve body kit.(google helps) It does indeed have a manual valve body kit in it, but it was installed by the p/o and I am unaware of the specifics.Many miseries in this car I have been...

no, but It has one of those B&M ratchet shifters. Came with the car and so far have not been impressed. Could it have been the cause? Bret

Today I was driving around my 72 Duster and pulled up to a stop sign, waited my turn at the 4 way and then took off in 1rst and got halfway through the intersection before my rear wheels came to a lock and that was all she wrote, it wouldnt go into neutral or anything.(not the parking brake or...

i now have the ignition all set up and she cranked off, but flashers still seem unresponsive, in any direction. the pink/ orange problem might just fix it. thanks for responding with that, i shall get on top of things tomorrow and see what is up Bret