Recent content by Caberocks

Thank you!!!

I figured out how it goes by using the picture here: Mopar 2 Speed Wiper Arm Motor Transmission Linkage Assembly A Body 1973-76 Dart | eBay You can zoom in pretty close on the picture there. Some advice for others, I bought some bushings on Ebay and couldn't get them to work no matter what I...

Is it really hard to remove the whole contraption and fix outside the car?

I have read through the forum and found a few tips, but still stumped on connecting the wipers on my car. Do I need both the plastic bushing and the metal clip? The one that's detached is going from drivers side to the motor. I assume the slightly bent part of the bar goes to the wiper and the...

Doesn't the heater control attach there?

Hi Guys, Putting my dash back together and have a question. When installing the radio, where does the support bracket that connects to the back of the radio connect to? Probably a simple question, but mine didn't have a radio or bracket when I got it so I am not sure what it bolts...

Thanks guys! Makes sense now, glad I waited to ask! Hopefully this will help someone else too!

Need a little help from you guys so I don't damage these. I've looked in all my manuals and they say use a small screwdriver or something and pull the locking tab out. These pictures aren't great, but is the part I circled what needs to be pulled? Is there an easy way to do this? Searched the...

Thanks Sedanman!

One more question for you folks who have done this. Gonna change out the door panels in my 1973 Dart Swinger, the old clips are probably still under the old panels, but I thought I might change them out anyway for new stronger clips. I'm seeing different styles of clips, I assume they both will...

1971 Dodge Coronet, handed down from older brother who went into the Navy.

Does anyone know if the rear panels are hard to install because of the back seats? Looks like a tight fit there.

Anybody used these as replacements? Just curious if they are a direct fit with no issues before pulling the trigger. The pictures online don't look like they have a hole on the drivers side for the remote mirror control, so I assume I may have to cut that myself? Thanks in advance for any...

I'm thinking it may work to cut the old frame so the new speaker lays right in and it's magnet protrudes out the back.

I bought a replacement dash speaker for my 73 Dart. Like most "replacement" parts, it doesn't look quite like the original. Has anyone replaced their dash speaker? I have no idea how to get the old magnet out of the frame so I can use the old speaker frame. It looks like its epoxied in or...