Recent content by dudeman601

i have a 64 valiant witha a 5.9 magnum, and a 727. i have a late model magnum starter, latermodel master cyliner (put disc brakes up front)and the transdapt engine swap mount kit. everything else is pretty much stock minus the normal stuff to swap a v8 into a 6 car. now i have been researching...

I called up dave at hughes. He hooked me up with springs and retainers. Thanks for the help

Thanks. This is my first magnum venture. I have built a couple of la motors and assembled b's before. There has deffinately been alot of learning with this build

Hr-276-msbd in./hyd in./.276 in./.220 in./.465 in./.496 ex./hyd ex./.286 ex./.234 ex./.492 ex./.512

I bought a regrind cam that with 1.6 rockers comes out to 513 lift. you dont happen to know a part number do you?

Is there a spring/retainer for the magnum head that can be used for a cam with lets say 520 or so lift that does not require machine work to the head?

Any help would be appreciated.

Does anybody know what/if there are any differences between the different years and the pistons. Ex: i am wanting to replace a piston in a 01 5.9 . Can i use a piston from 97 ,or did they change them every so often. I read someplace that 2000 or 99 they lowered the compression to solve...

I have a 360 in my car j heads ld340 intake with a camshaft designed for a 4x4. The Heads are prolly the worst looking heads i have ever seen (casting flaws in the exhaust Ports) it has pretty low oil pressure so it will need some work this winter. I have a 451 Project in the works right...

Hello all im currently in lawton. I have a 64 valiant that i put a 360 in. I ocassionally see a 64 cuda at the track and a 65 or so 4 door dart around. Trauser on here is my neighbor but he hardly works on his ride anymore

thank you.was your dana out of a truck? lawton is not that bad. i have been to other posts that have had alot of things to do in the area, but i think they are working on fixing that here. heck we have buffalo wild wings now. they have brought in the A.D.A. which has increased the troop...

it came from a 1 ton.

are dana 60 u bolts bigger than lets say 8 3/4 u bolts? if im measuring correctly , my 8 3/4 is 3'' in diameter, and my dana is 3 1/8. do i need to look for dana specific u bolts? will i have to find shock plates specific to the dana?

how much do you think it would be to ship to 73505? thanks

this stuff is for my valiant. i am looking for 8 3/4- dana 60- or 8 1/4 stuff if it will work. i need u bolts, shock plates, i have 1 brake back plate and 2 10'' drums off a truck i think (heavy as heck) i am looking for drums to, if the price is right. thanks dudeman601