what motor was in thw a-body from the factory? a slant 6 or a 318? then what rear end did it have ? im no expet on it but just about all the slant 6 & many of the 318 had te small light duty 7 1/4 rear end & tey all had a small bolt pattern maybe the rear ed builder can re-drill yhe axle...
what rings di u use? the break in of the rings r more important to mr
i used molly steel rings , i used a very pacific patern
first i ran it @ idle till it warmed up then ran it @100-1500 for 30 minutes, then we drove it up to 3000 rpm . for 30 mins then up to 5000 then back ti...
I USED CAST RINGS BUT NEVER AGAIN THAT WAS OK& WORKED BUT IT USED OIL ALL THE TIME I BUILT MY LST MOTOR & PUT IN MOLLY STEEL RINGDS I LOVE TEM THEY R NOT THAT HIGH SEAT FAST & R GREAT RINGS NO OIL USEAGE I GOT20 K ON THE MOTOR
HOW MUCH OIL PRESSURE DOU HAVE ?10 LBS OF OIL PRESSURE FOR EVERY 1000 RPM's FOLLOW THAT RULE & U WILL NEVR SPIN A BEARING ITS A OLD RAM CHARGERS RULE but its good insurances
low compression DOSE NOT MEAN GOOD MPGS the key os turning less rpms over drives & gears . that how the new cars run soongood . u cantake a doggymotor &S makit run good out of the hole with a good set of gears if u want the most mpgs out of a motir good comptression & the right cam A...
well when u powr up thr generator turn off the power from the grid . u might want to put in s wind turbine or too for those windy days woith out any rsun . then what size batteries r u useing for yur power storage ? & what siz of inverter r u planing on useing? its alll important things to...