Recent content by redrag64

Sounds good - Thanks!

I was looking at one of the PST kits for my 64. Did you buy a complete kit, and if so, did you use the standard kit, or the polygraphite "super" kit?

Looks cool, but I'm waiting for slantsixdan to drop some knowledge.

If you are looking to switch out the entire assembly, its pretty straight forward as Cudamark explained. The units slantsixdan has sold are top notch - if he has them. I found myself in a bind, and needed one asap. I found a set-up through Mega Parts for $55.00 (+ ship = $60.95). I had to...

I don't think anyone makes repops, so you're gonna need to track down some originals. Maybe check here with cudamark. Good luck.

I would start by adding a spacer that gets you within an inch or less of the radiator, and adding a shroud. maybe also get more and/or bigger fan blades. That fixed a similar problem I was having. If issue continues, then consider moving on to puller and/or pusher fans. Good luck.

After searching around, I ended up doing the exact same thing.

I'm having the same issue (64 dart vert). I put the same windlace in months ago and was told they would "break in," but no luck so far. I am only having an issue on the driver's side. I think I'll drive it to a body shop and pick their brain (assuming they have at least half a brain to begin...

I have one of damraider's caps - very nice.

Yep, I've check around and no luck. And yes, it is the 64 on Craigslist. And yes, it is a bummer that it is being parted out. It seems like it was in really good shape. It sounds like the owner had multiple supposed sales fall through and got frustrated. On the plus side, I'm picking up...

This is what I was afraid of. Any suggestions on where to pick-up a correct seal? It sounds like they are pretty hard to come by. Any chance Sweetwater has one? The windshield is from the guy parting out the Barracuda down in your neck of the woods. Any suggestions would be great. Thanks!

Why are you pulling it out? Are you replacing part or all of the switch, wires, or what? If you can get the wires to pop out of the harness, your idea will work. I've done it that way, and I've also cut the wires (leaving enough room on the harness end to splice the wires back together)...

10-4. I'll pull the panels and check it out. Thanks!

I'm about to mount front armrests in my 64 Dart, and am wondering if they tie into a metal brace/backing inside the door panel. I've had the panels off in the past, but haven't thought to look. Any insight would be greatly appreciated. THANKS!

Pictures would be great. What's your opinion as far as the two being interchangable? THANKS!