issue with AMD Demon floor pan..please help newbie

-
heres a pic of the hump, i havent taken it out yet so i dont have a pic of the hole.

your floor looks great ! :cheers:
 

Attachments

  • fp2.jpg
    83 KB · Views: 169
  • fp18.jpg
    73.1 KB · Views: 155
  • fp19.jpg
    77.1 KB · Views: 162
I've got the hump off of my dart. I'll take a pic of the hole in the floor and post it in the morning.
 
Hey; the floor looks good.Next one will be a lot easier.Great job!
 
Place your new hump on the floor where it needs to be.Then trace around it with a sharpie marker.Cut your hole one inch smaller than your sharpie line.
 
68383GTS said:
Place your new hump on the floor where it needs to be.Then trace around it with a sharpie marker.Cut your hole one inch smaller than your sharpie line.
Click to expand...
Yep;that always works for me.I put one in a 69 about a week ago with 3M panel bond,worked real good.
 
This will give you a rough idea where to put it. I like what the other guys are saying about setting the hump up there and tracing it out. Looks like with the hump sitting on the floor the edge of it should be about an inch from the fire wall seam.
 

Attachments

  • 17 four speed floor hole.jpg
    63.7 KB · Views: 136
dbphemi said:
This will give you a rough idea where to put it. I like what the other guys are saying about setting the hump up there and tracing it out. Looks like with the hump sitting on the floor the edge of it should be about an inch from the fire wall seam.
Click to expand...

thanks! that should help me out a lot : )
 
i have to say everyone on this site are awesome! this is such a great site to be apart of!
 
You must log in or register to reply here.
-

Back
Top