Stop in for a cup of coffee

-
Dropped out the y pipe. Made things a little easier. Dropping coolant next. And do some stuff up top.
 
Unconventional said:
NWS has a "gale warning" up for the offshore waters today.
Click to expand...
Something brewing down south, my be a good time for me to prepare to wet a hook , last fall catch in 25 minutes

FB_IMG_1594809741635.jpg
 
toolmanmike said:
I made a mess in the driveway. The old concrete is pitted from salt and really absorbs that dirty oil.
Click to expand...
I got a big pan from Autozone years ago that takes care of that. Looks like a monster cookie sheet. Also good for sloppy tear downs. Have all the pieces of my pressure washer on it now. Just waiting to see what I want to salvage from it...Looks like I am getting another one Sunday for $50 off Marketplace.. Looks like new. It's badged Craftsman instead of Troy Bilt. Otherwise looks like almost everything is the same as mine. He said it runs great, but leaks. Might just need o-rings, but doesn't matter since my pump is brand new.
 
Unconventional said:
We had bass that big in one of the ponds at the rock farm. They were smart sunuvaguns and well fed with the bugs and the minnows, wouldn't bite on anything on a hook.
Click to expand...
these was cought on a purple artificial 6 inch worm Texas rigged.
Now these big girls are feeding in the shallow areas that is 10 feet away from deep water, back in my younger years I was ranked 27 in the state and won one tournament, placed 4th , 7th and three 9ths. This was back in the early 90es
 
So I got a quote for concrete to put up this grain bin and that quote is 1775 bucks after taxes
 
65dartcharger said:
Whats the status on covid in US? Is there any restrictions for Swedes to come to US? Planning for Carlisle next year.
Click to expand...
Yes. There’s still Covid.

As for restrictions, consult the US state department, as they’re constantly changing. And that far out, it’s anyone’s guess at that point
 
So I did a quick 3D model in Solidworks, I could more than easily fit both the Dart and the Polara inside this Grain bin shop idea. Concrete will be less than 2k. I have the bin and all the augers, which I could likely sell to offset the cost of the concrete. The bin goes up like an old erector set, everything is pre-drilled. Being as tall as it is, I’d have plenty of room for a lift AND have a loft above it
 
dukeboy_318 said:
So I did a quick 3D model in Solidworks, I could more than easily fit both the Dart and the Polara inside this Grain bin shop idea. Concrete will be less than 2k. I have the bin and all the augers, which I could likely sell to offset the cost of the concrete. The bin goes up like an old erector set, everything is pre-drilled. Being as tall as it is, I’d have plenty of room for a lift AND have a loft above it
Click to expand...


54f56f37-29cd-4f15-9198-392d15b4d71d-jpeg.jpg


Build a square entryway similar to these for the door and you won't lose any square footage.
 
Almost got it. Ran outta steam. About 3 hours ago. 2 hoses 2 bolts and a wiring harness to move. And i need to make room to move shop crane.
 
You must log in or register to reply here.
-

Back
Top