I have too much slack in axles. Took it apart and that part between axles is missing. Looked at an extra 3.91 I have and see it in there. How do I put the missing piece back in. Needless to say, but this is my first rear to mess with.
1st-pic is of extra 3.91
2nd is of 3.23 out of car.
Thanks , checked out the website. I'll give them a call tomorrow.
Any other ones I should know about?
Any options on gears? 2.44 or 2.66.
This is my first 4 speed big block. Rear is 3.55 sure grip. 14 wheels.
Not worried about high speeds. Just quick green light to green light.
I decided not to rebuild the 1976 OD a833 trans that came with my 68 cuda.
I called Brewers to order a rebuilt 833 but they are backed up 14 weeks.
I can't wait that long.
Where else should I look for a good reman a833 a body 4-speed? Like warranty, I don't want to mess with a mystery...
I have one I took off my 68. I assumed it was going to be bad , bought a new one. Turned out to be very clean. Should have left it in... Lol.
Let me know if it's what your looking for. PM your number and I'll text you some pics.
Welcome, I'm in the same process as you. Looks like we caught the same Fish..mine is white as well. At least for now.
This is my first Mopar adventure, and everyone has been patient and most helpful.
Good luck and enjoy.
I'm ready to replace my 68 cuda top. Need input on where is the best company to go with. I'm looking for a good top that will install well and not be an issue.
I'm having an experienced shop install it.
Thanks
Need to know what this one goes too.
Came in a box with my 68.
I'm running a 383 and have been reading I may need some big block linkage.
Hoping someone can run the numbers.
Thanks for the pic!!
Just had an aha moment !!! First time I've seen the line on the firewall. I've been thinking it went on the underside of car. This makes perfect sense now!
Have to remember this is my first Mopar...... And it's showing with basic confusion like this... Lol
Keep the pics...
I have to install all new front disc brake lines on my Cuda. I meant to do it BEFORE I put the engine in , but I got too eager :banghead:
I got the car when it was taken apart and I don't have a visual on how they route around everything. I have the pre-bent lines but not sure where to...
Thanks for the pics. Very helpful you two.
Mad accountant..... The champion number you gave me came up as for a belevadear.
Is that the one your using and do you think it will be ok in my 68 cuda? I
Thanks for the info.
Does the lower radiator inlet clear the oil filter. Thats the problem I'm having.
Any chance you have a pic of the set up in your dart?
I'm needing a big block radiator for my 68 cuda with a 383.
Need to make sure lower neck clears oil filter.
Doesn't have to be factory , but would like factory look. It's a 22in radiator.
Thanks
Tim
Arkansas, 71964
Thanks, good idea.
, but I'm sticking with the factory exhaust manifolds. I like the look of factory.
Plus I'm not too worried about too much performance. I'm thinking the 383 is going to be more than enough to push the little vert down the road. Crazy power in a vert makes me nervous :burnout:
Looking for a big block Z-bar for my 68 barracuda . Has 383 ci. 4 speed.
Turns out the one a have is for small block :banghead:
The linkage needs to be for my 833 with hurst factory shifter that I believe is a 77-78 model.