Search results for query: *

That does look a LOT cleaner than 99% of turbo or blower installs I've ever seen. That's nice.

Steve, even when the rings seat 100% they will not seal a constant pressure 100%. There will always be some air that gets by because the rings have gaps. Go ahead with your plans for that engine. It's fine.

How much for everything?

That really looks very good. Very ingenious and I like the addition of the cup holders! Thanks for sharing the tips, pics and drawing. It will help me. That looks like a correct shifter handle too, maybe? Brewers has those. Then you don't even need the Gunslinger bracket.

It is amazing how many "friends " you have when they find out you have a truck....and a strong back

Ok, here's a couple of ideas . Get some molding trim t-studs that look like this. Use a Dremel tool to grind away the rest of the broken stud. You will need to file the base of the t -stud so that it fits inside the molding and sits flat on the molding but doesn't come up higher than...

On the supercharger kit do they offer different crank pulleys? Mix and match pulley sizes can be fun (NOT) but you can dial in the shaft speed and PSI. Sometimes a 1/2 inch change on just the top pulley can be too much. And you want as large of pulleys, matched of course, so the belt has better...

It's not.

The last 6 is an 8. You can tell it's different from the first 6. It's just a little deformed is all.

I had to move stuff around the shop today. The Coronet got about a quarter inch of dust rinsed off of it! I thought this was a pretty cool shot.

When i store all 10 of my second gen Barracudas in a barn, i put a camera on em. And a bunch of insurance. It's hard not to think such a big job has insider information. A semi car hauler can do 7-8. That means definitely two trips or two haulers. Two haulers means more lips to keep shut...

Awesome mph! What rpm are you seeing for brake stall and how much boost? What’s your 2 step strategy?

THAT is very obviously from not spinning in the bore. Not the lifter's fault.

that's my thought. hadn't been checked in on and when old mother hubbard showed up the cupboard was bare. one car? two or three? okay, yeah... but scooping up and disappearing pert near a dozen? that's denmark rotten levels.

That was my though, I bet this was an unmanned shop and not on someone property, rent up there is cheap compared to the LA area. This could have happened over night or days, hard to say how long is was from when the owners were last there. Alan

Looking for a 65 Column Shift 904 V8 Transmission. Thanks

length and dash attachment is totally different you need early A stuff only for a bolt in solution.

...qualifier with 21.0 bonus points. Way to go! More great picks! We have 16 players again this week and 12 different driver combos made up of: * 4 different Top Fuel drivers with no Round 1 head-to-head matchup. There is a possible head-to-head matchup in Round 2 if both drivers survive the...

That's what I did. I found an auto console that was pretty beat up. I cut the top plate for a 4 speed, designed a trim piece to go around it and had sendcutsend.com make and powder coat it for me. I then took a piece of thin aluminum and made a 'panel' to cover the pitted and beat up...

How do all of these disappear without any knowledge? Must have been forgotten and not looked at for a long time.

Back from the show. Time for a shower and then a few toddies in the parking lot.

Im far from a professional but imo that is probably from the rings not been seated yet on a new motor! Mine did the same thing when the engine was new I could crank it over by hand and hear air escaping between the pistons and walls down to the oil pan. I freaked out of course. After the engine...

converter maybe?

Tough to get a good place to check, would think it would run better with that angle, good luck!

And something else shrinks when it gets cold but I can't put my hands on it ;)

This one was still rotating, and failed. Made it about 30k miles.

This is why I made mine adjustable, I can go from 10 degree down to degree up before any binding

part way only

That's really bad news... Will a later model steering column work? I really don't want to convert it to a floor shift.

Steve, don't panic just yet. Imo, the rings don't fully seat until the've been under load, like several 4grand decel's in gear, and that can't be replicated on a run stand. Just 1 cyl is a concern thou. Wish i had a quick solution, but if i think of something i'll chime in.