Search results for query: *

O rings need to be oil resistant, so, I'd get a kit made for that application. There is a spool valve inside the control valve assembly. Start out by centering it as best as you can before starting the engine and final adjustment. In the adjustment process as AJ mentioned, You just want the...

I was looking for Cast blast in brushon. Couldnt find, but found a trick the other day, use POR15 exhaust manifold paint. If it ever needs a touch up it brushes on. The coverage and durability on that stuff is incredible. I had a can already, so used it on my master cylinder.

He’s talking about getting a set of Chevy ProMax heads and jumping to modified class. Lol. He’s hooked.

Haha some lady in the parking lot just gave Colton her long hauler plaque so now we have one too haha

Just got done cutting the grass........................and a lot of other items checked off the list

Hope you get lucky

Also disconnect the alternator completely and see if the drain goes away.

:thumbsup::thumbsup:

Great way to spend the day. I'm trying to get work crap out the door before 5pm

Do Dusters and Dart Sports have the same wheel base? thanks mark

I also used the Autobody floor pans, which fit perfectly. I used Laysons Valiant lower quarter repair panels on my wagon. They took some additional work as they were either too long or too short (can’t remember which). Also used Laysons lower front fender repair panels which also fit very well.

Dropped off the pistons and rings and got to check the rough bore of the block while i was there. Cleaned up nice at .020! Also dropped off bearings for cam, rods and mains. He said next friday he “will be done”

Slow day in here today..........I'm just knockin around the Shop workin on the Cuda....

i was gonna say hemi orange, but didn't want to risk being exiled to main street.

It does and to some extent on the factory location of the AC/heater unit bolt mounting holes on the firewall . There is some wiggle room (not much) at the vent into the opening of the AC output location. My vent slipped right into place at the AC and also to the vent mounting area. Maybe...

It's easy to test whether the gauges are completely bad. Not so easy to see if they're accurate. A simple Ohmmeter will tell you if the gauge circuit is still good. The location of where the needles rest will give you some indication if the gauges are cooked. You want the needles to rest just...

Thanks, PBR. Like a crook in one of the Eastwood movies said, “I gots to know”. Light, yes. But they is big! Pays to have a friend with a big trailer. Racing stuff like that tends to be more fun than racing “real” stuff. Years ago, I had a stock Mustang II street car with a four-cylinder and a...

For sale is a set of M/T big block valve covers. They are in great shape and clean up nice but are still in what i'd call "driver condition". With a new coat of wrinkle black paint they would look new These are reproduced for chevy motors nowadays but are not available for mopars. These are...

Here are the front leaf spring hanger studs. I know I have the front spring eye bolts somewhere too, I just can't find them. Part of getting old I guess. I will find out tomorrow what it will cost to ship them to you, if you want to give me your address. Also, I'll see if I come across that...

Both you have spoken about is NOT factory. There is no possible way for us to know what they are 4. Best thing I think is to remove them and then if something does not work troubleshoot it to figure out why, and if necessary, rewire as needed. And here it comes so, hang TF ON...

Marking their territory around here. Surprising tbh.

For sale is a like new condition MSD 6al2 Programmable ignition box including the MSD harness. This is a fully computer programmable ignition box that includes 2 step and a rev limiter I bought this for a project and ended up going with an entirely different ignition setup. These retail for...

one 15x8.5'' American racing outlaw 1 , wheel with 3 3/4'' back spacing , 4 1/2'' bolt circle , can be unilug . Bob , Collinsville ,Okla.

I see now. Thanks

1...Drain. Start with a 12V test lamp. Disconnect battery ground, and put the lamp between battery post and ground. Does it light? Check everything imaginable. Is lighter pulled out, glove box lamp out, trunk light? Then move to your multimeter, put that in series on the high amps...

So the placement under the dash is dependent on the AC unit

Afternoon FABO family, Let me know by saying, I’m a novice with some previous automotive knowledge.. I’ve pulled and replaced an engine 40yrs ago and thought sure, I can do that again… So today, I have a 66 Barracuda that had the 273 2bbl & 904 tranny. I pulled it and replaced it with rebuilt...

Hey Chasers, it's National Bourbon Day today. Cheers! I was lucky enough to score s couple of these. Thanks Terry!

For sale is a NOS Racer Brown STX-22 cam still in the original bag. Its a 3 bolt with 590/590 lift and 310 duration. This was the same cam that the Silver Bullet ran back in the day; A real Chrysler engineered race cam! $300 plus shipping or trade for a big block B/RB 3 bolt cam Or pickup in...