Search results for query: stroker

It's been a slow day, so here's one for the FABO brain trust. I am finishing the build of my 408. I'm looking for recommendations for a spark plug for initial fire up. 408, TF heads and intake. Quick Fuel 750 mechanical secondaries, TTI headers. Forged Ocon pistons at a calculated 11.03-1...

Chinese aluminum heads 170runners Airgap intake Roller lidters 750 carb 11.1 compression or 11.7 suggestions please 318 stroked to 392 new bottom end balanced. Purchasing from clegg. Not looking for trophies here. My thumper cam is not really adequate now. .514 int 498 int. 107 lsa. Voodoo was...

Mopar 418 Small Block Stroker $7500 will consider trades Harned Ky 360 based (bored .080 and a 4” stroke) Half filled block Eagle Stroker crank Cat rods Icon .040 340 Pistons (4.080 bore) Hughes Solid Flat Tappet .678 Cam Indy 360-2 230 CNC Ported Heads PAC Valve Springs and Ferrea Valves T&D...

I have started assembling my 340/420 and I need to start deciding on which intake to run. I currently have the following two intakes: Non-Airgap RPM Weiand X-celerator (small single plane) I have gasket matched both of these to the same intake gaskets, and the depth of the match is about the...

I have a new-in-box UEM Icon premium forged piston kit for a 416 stroker. ( +.030 340 ). This includes the pistons, pins, and rings. I had to go another .010 (+.040 ) with my engine so I purchased another set. Piston p/n IC744.070 , rings 4000BD8.070 Normal retail is 843 +/- plus tax ect...

...4.56s. I currently have a mild built 340 with edelbrock aluminum heads , Victor intake and a 750 race brawler carb. I'm definitely building a stroker from the 360 , just not too familiar with anything other than the 408. I'd like at least 500hp and a low - mid 11 second street car. What are...

...was taken out of car. Outside was just taken down to be prepped for paint. Everything Inside is connected and ready to go. Motor is a 340 stroker Car ran 7.0x 1/8th mile Believe rear has 4.10 gears. $14k with everything $9,500 roller Currently car was sanded down to bare metal and put in...

Looking to see what preference brand gaskets you guys/gals prefer in your build. I have a street / strip car 10:1 nothing crazy but looking to freshin things up.

I was wondering what I need for an oil pump for my 408 stroker. The HV one I have will not clear the main stud bolts. Wondering what I am looking for. Also, the pickup tube attaches to one of the main bolts. Do I need a stud kit for that, or can it be placed under the bolt (between the bolt...

418 Stroker and 904 for sale Harned Ky $8500 OBO This is a 4.00 stroke 360 block it is 4.080 bore decked .010 line honed half filled with concrete and It’s an Eagle 4340 crank with H Beam rods. It’s got Icon Dome pistons with around 14:1 Compression Hughes Solid Flat Tappet .678 cam it has Indy...

340/360 Stroker pistons. I have had these for sale way too long. $250.00 Shipped. Lower 48 states. I do not accept electronic payments. Postal money order or personal check with time allotted for bank clearance. 340/360 Wiseco used pistons. Seven Pistons 4 right and 3 left. Bore size 4.060 for...

Up for sale is an essentially new set of icon forged pistons. 4.070 bore 4.00 stroke. They were run through two heat cycles and I had to tear down the engine because of a cam bearing failure. There were other issues with the machining on the block and I ended up having to go up another size on...

I can do some 'packaging' with these parts and other unlisted associated parts not listed depending on your needs. I'm about 25miles North of Detroit, Michigan 48316. 1)Roller cam LSM 4/7 swap NEW 278/290 @ 050 .490/.480 lobe 112 lsa (.730"ish lift with 1.5 rocker)$450 2)Roller cam Lunati NEW...

70 Plymouth Duster Race Car Project and 418 Stroker Located in Harned Ky $8000 for the pair $6000 for just the Motor $3000 for just the car It’s a 360 half filled punch .080 over with an eagle crank cat rods and icon pistons it sits around 14:1 compression a Hughes solid flat tappet .678 cam...

...to my build. I’m using hydraulic roller lifters so I can’t tube the gallery/block off oil there. So what if anything should be done for a stroker small block that will be shifted 6500-6700 max. Right now I have a high volume oil pump, milodon pickup-deep baffled pan and profiled crank...

Hi everyone, I’m in the process of building my first 360 and am debating on making it a 408 stroker. I will be using speed pro h116cp pistons 30 over & speedmaster h beam rods which are supposedly clearanced for a stroker. I have a stock crank ground 10 under (.003 current bearing clearance but...

I'm assembling my 408 stroker (4.030 bore) and now that I have the pistons installed, I measured the deck clearance at .020" I have Trick Flow powerport aluminum heads with 60cc chambers and Mahle pistons with 16cc dishes. This engine should put out about 525/550 with the cam selections and the...

I am in the process of assembling my 1973 LA 360 block to make it a 408 stroker. I have a Molner forged rotating assy with H beam rods. I noticed after putting in the first two piston assys that the clearance between the rod bolt head and the block is very tight. About .040 on the first one...

Hey guys I'm looking for some input on my next carburetor. It's a 66 Satellite with a 354 poly stroker. 3.58" Scat forged crank, Scat rods, Ross pistons 0.065 over, 10.8:1 compression. Poly heads with a little bit of porting, 1.94"/1.60" valves, Schneider solid lifter cam 264F (220° at .050...

Any 340 stroker pistons for sale please? New or very nice used set would be fine too. Best wishes from PolyJohn

...the dart into a telephone pole after I lost all braking. So I took the entire car apart and I have the engine pulled looking to make more power. I recently bought a COMP CAMS KIT I’ll post a picture below of the specs. Im just wondering what 390 stroker kit is best for my 318 with this cam setup.

Looking to trade for Big Block engine stuff. First choice would be a New AR Engineering Timing Cover part number 224. Second Choice Set of New BB Mopar P5007614 Black Cast Aluminum valve covers. Third Choice New Trick Flow® Valley Plates TFS-61600830 with two Felpro 1009 Head Gaskets. Fourth...

500“ stroker engine kit purchased from PAW in 2006. Came completely machined and balanced ready for assembly. 440 block .060 over (4-14-1973) Forged steel 4.150” stroker crank PAW 6.760” connecting rods Ross flat top pistons with valve relief Edelbrock 60189 assembled heads with 88cc chambers...

Did they ever make a 4 inch stroker crank for the 3.9 ...I went to start my 89 Dakota after it has been sitting for a few years and the engine is stuck...got me thinking that if I have to pull it for a re-build it would be interesting to pump up the torque a bit...

This is an ‘03 5.7 Hemi that has been bored And stroked to 395 cubic inches. Has Callies Compstar 4340 crank and H beam rods, Mahle pistons, Comp 268 Hyd.Roller, 92mm throttle body, Accel injectors, Hooker B-body swap headers. This is a very nice, streetable Motor, perfect for a daily driver...

After several reviews and information interchane within the forum and online, this will be my new setup combination. Eagle stroker 410 Stroker, with H beam connecting rods, and girdle. Mahle Pistons. flat top 11.5 CR. Indy 360-1 Top end kit. CNC ported, T&D 1.6 rockers. Lunati Solid Roller cam...

I haven't made it past the second pull and he's over 400 horse, 440 tq @5500. Through 340 manifolds! Stay tuned.

20 months ago, I lost oil pressure in my 340 (70 Challenger numbers matching) and found that the oil pump internal components had many scars, the oil pump screen was full of crud, the thrust surface on the crank was ate up, and my main bearings were toast. (Please keep in mind that the bottom...

Hey all! I think this post should go in here.. Been chugging away with my 340/416 stroker and now comes time for some help/experience from the group. Trying to figure out what oil pan to use in the vehicle. I have seen a number of people using Milidon but because of the earlier model year...

Selling a complete LA 408 Stroker from carb to oil pan, pulleys to flexplate. This engine was built in 2011 and has very few miles on it. Runs great, doesn't burn oil or run hot with tire roasting power. Its currently sitting in my 70 Dart Swinger so you can hear it run or take it for a drive...