Search results for query: *

SBM 90 degree oil adaptor PT# 2463661 and bolt. Has been hot tanked and bead blasted. $90 plus shipping. PP F&F, check, or M/O.

I got curious and googled this. Baskin Robbins 31 flavors. Who is Kelly and why is cream misspelled?

Sorry for the misprint! When we see the Lord come again, he might be driving a Mopar as he certainly does deserve the very best!

Why Troy still hasn't finished his car... he's out fishing on my lake again. @CFD244

340 LH Exhaust Manifold with casting number 3751084-2. There is no pitting anywhere on this manifold, could easily pass as an NOS piece due to the cleanliness of it. Casting date of 8-8-72. $175 plus shipping. PP F&F, check, or M/O.

so it's confirmed, Jesus drove a mopar. (all kidding aside, that's great deal on a good carb)

They press into the eye of the bushing from either side. Putting them in the freezer and then pressing in with a vice works pretty well.

Tired of the people in town and best I get out of this place.

I've not done much with the car in the last couple years, recently dug it out and dealt with some small issues it was having. Ended up developing an overcharging issue and swapped valve covers back to fix an oil leak it had. Still need to do a transmission mount on it though.

its something little and stupid but i had to do this. its been annoying for years so i finally broke down and bought the kit. for a authentic mopar reproduction it sure fit like ****. i hate the fact that the lids on the repop ones open in the wrong direction. whatever though. it looks...

Prop valve should not make them mushy Air in system, maybe adjustment, and maybe POOR FIT (arc) between shoes and drums.

Sweet ride!

My pinch on the first head after tubing is 1.015

Where are you located? I have just a bare dash frame that has been sand blasted in good condition from a 73 Duster. I am in Michigan.

Ok just working the common wall for five minutes I gained .030 the length of the pinch. That’s a nice gain and I’m no where done. Just working down some of the bolt bulge look how much short turn area I gained already and I didn’t tube them yet. My thinnest area at the pinch is from .062-.118 so...

Hello, you or someone going to Carlisle Pa in july. I'm interested but I'm in mass. Thanks Paul

One of your farmer friends must have a machine shop that you could stick them in. But why the hell would you want all the work of travelling around. The setup, tear down, looking for stuff, driving. Not for me man. Got my place, got my toys, got my toy box. Maybe a trip or two to some place warm...

Yep, tires, driveshaft, ujoint or loose yoke on the differential. Tires is easiest to start. Dont forget you can put it on stands to check things. Spin the tires in the air at speed. If you don’t find it put the fronts on the back and test again. That is how I go about things, but obviously you...

Here is a 9810 Thermoquad that is calibrated for a small block. It has been in the shop for 35 plus years. Everything moves freely as it should. I will disassemble and reassemble it after inspection it internally and set the floats. Although it may need the float reset after they play...

Lets update the list since more examples and details have been emerging: 2822 930: Redfish: Variable speed. Green, Red, Blue, Brown at connector 2770 137?: 4spdragtop: Variable speed with variable speed switch; 3 wires atconnector 2822 962 : xtremist: Variable speed ? with variable speed...