Search results for query: *

Where did you get it from ? Thanks

I'm thinking of adding intermittent wipers to my stock wipers on my 1972 Plymouth Duster what would be the best way to go about this and where can I get the parts to do it. I would like to keep all of my same switch and wipers the way there are. Does anyone have any ideas or done this before ...

I have a 408 with a 22" radiator and fan shroud. When setting in line at a car show it wants to heat up to around 200 or 210, driving down the road is fine. What size of radiator cap should I be running and what size should I have on my 340. Thanks Dan

Where is the best place and type of frame rail connectors I should get for my 1972 Plymouth Duster. Thanks Dan

I am looking for a nice driver side seat hinge cover ( black ) for a 1972 Plymouth Duster, If anyone has 1 for sale please let me know. Thanks Dan

I don't think I have enough vacuum for my power brakes with a bigger cam, has anyone used the electric vacuum pumps or know anything about them. Summit has them listed for around $ 300.00. Without adding a canister it looks like the way too go. Thanks

Does anyone know where I could get a tork strap for my 408, I think with the added power I twisted a motor mount. Thanks in advance for any help. Dan

What is the best place to get 3:55 gears for a 8 1/4 rearend ? I have 3:23 now and would like to move up. And also would that help me much for quicker response. Thanks

I have a 1976 Dodge pickup D100 shortbed BigBlock for sale, body and paint are good needs the dash finished. I am working on getting pictures around later. Has fresh paint, all glass is good, wheels are new 1 back tire has slow leak. The motor runs good just needs the wiring cleaned up and a...

I already have a 1972 Duster, I thought about buying it for the good grille and selling the rest if some would want the car. The seats and console are in fair shape the 340 is not in the car someone pulled it out and put a 318 in it. Has extra doors and trunk lid and all the chrome with it...

The roof is in good shape and the 340 is out of the car.

I just found a 1972 Duster with bucket seat and factory console with auto on the floor. It comes with a 340 with 2 8.75 rear-ends the guy said the thinks they are both posi. It needs a new tail panel and lower rear quarters. Its also has 2 extra sets of doors and all of the chrome for it. he...

I pulled my 340 out and put in a 408, still working on tuning but its a big different In the Duster.

With all this rain I found some problems, 1st thing does any one know where I can get the seal for my wipers and I also need the clip that holds the wiper linkage together under the dash for my 1972 Duster. I was driving home could not see and was getting wet. Thanks for any help.

Did you sell it yet ?

It looks like the one I have, If you could email your address I'll get a check headed your way and I'll can send you back my info. Thanks

I'm looking for a day/night mirror for a 1972 plymouth Duster, don't know if they repop them or if someone has one for sale. If you have one or know where too get one please let me know. Thanks Dan

Does anyone know where I can get a day/night rear view mirror for a 1972 Plymouth Duster ? I can't find anyone that repops them, or even if they do make them. Thanks

I loooking for a complete set of tail lights for a 1972 duster, do anyone sell repop ones ? Thanks

I have a stock 340, my question is what is the best way to increse horsepower about 100 or 200 more HP without spending alot of money. I don't race it just drive it to car shows and around town, but if I want to turn the tires I want power to do it. Thanks

Sunday May 5th 2013 8:00am to 3:00pm Mendon Michigan High School, Kiwanis Breakfast 8:00am to 10:30am dash plaques to 1st 800 cars, for more info call Dan or Ellen 269-273-3535

Does anyone have a set of rear seats for a 1972 Plymouth Duster that they want to get rid of, color doesn't matter, I just need seats that fit right. Thanks Dan

so what size axle do you have now and what size are you about to swap in? Also not seeing anything about backer-plates/drums etc. you will need those and they can be costly/hard to get hold of. you can reuse shackle plate (where shock mounts) if you drill the four holes a little larger to...

odd, maybe the starter solenoid got fried if you accidently arched wires while swapping out alt or just went bad? also, if they used the massive painless fuse block that goes between battery/alt check that fuse, it would be a big piece of plastic with inline between the two, most dont use it...

can i just buy http://www.summitracing.com/parts/CCA-1622-1/?rtype=10 and run one in place of old one?

upon closer inspection, the piece laying on arm in picture in the center part of the roller pin, the outside part that rides on spring was ontop of head also! Will replace push-rod and rocker-arm then fire her up and hope I didnt bend a valve since I was under 5k rpms when this happened. And...

I am guessing by looking at the pin on the other rockers they look like they are held on by some brass colored piece that goes through the center of it. I have no clue how they are held together. The roller for the rocker arm I set ontop of rockerarm for picture so people could see the part...

heres a picture of the piece in question, please let me know how someone like I should go about fixing this, Im assuming I take entire rocker arm assembly off and carry it to napa and have them order right parts? (the brass piece was what used to hold the little pin to the rocker arm, didnt...

driving my 68 dart 340 last night it developed a ticking noise when doing a small hole-shot (less than 5K rpms). Drove home and pulled valve cover this morning and the little pin that sits ontop of valve spring was sitting on head. Brass connector piece is MIA? My question is how should this be...

I will be ordering these in the next couple weeks combined with some regular oe style shocks from autozone. thanks for all the other info guys