Search results for query: *

  1. yeah

    What Are You Doing To/With Your Car Today?

    It’s been a while , feel like I have not been on a bodies or worked on my car in years , stupid house projects . But Finishing up my winter boredom mod. Did some fabrication to mount my radiator/ e fan on a slant . To then exhaust all the hot air through the aluminum ducting That goes though...
  2. yeah

    Slant rad / hood ducting

    Some pictures of recent winter boredom mod I did . Not for everybody , but figured I would post . Slanted radiator mount with ducting going through the hood
  3. yeah

    Timing help ! Sorry

    hey guys , thank so much for all the help . Sorry I’ve been dealing with family/work issues . Have not had a chance to write back . the tape is on backwards . I didn’t do it , I bought a used motor and it was like that . I have to get new tape and change it .
  4. yeah

    Timing help ! Sorry

    Hey Rocco can I quickly dm you ? And ask you a quick question cause I’m just super confused . My car don’t make sense haha
  5. yeah

    Timing help ! Sorry

    Wow thanks guys !!!! I guess it makes sense why my car is having a hard start , popping through the exhaust , and occasional backfire through the carb . I have not Checked yet cause at work but I think it might be set to 10-15 degrees after tdc . I don’t know how I managed to screw this one up...
  6. yeah

    Timing help ! Sorry

    Ok so it’s been like 2+ years since I worked on my car .I feel like I forgot everything . Car has a 360 , 30 over , small cam , aluminum heads , No vacuum advance distributor , nothing special . I’m confused about timing my car . This might sound so stupid to you all ! But here it goes...
  7. yeah

    Distribution block fitting size ?

    hey guys wondering if anybody can help me out ? Does anybody know the sizes of tthe brake line fittings that go into the distribution block . I pretty much just need the sizes of fittings that run from the master cylinder to the distribution block ! It seems that they are bigger Don't mind...
  8. yeah

    Welding question ?

    It's funny , I welded a cage , j bars , subframe connectors into my car and did not pull anything off . This was a likevtwo years ago . I just realized it today when I'm about to do this van Haha . But thanks for the help guys !!!!!!!!
  9. yeah

    Welding question ?

    Probably a stupid question haha . So I've welded on a ton of cars before mostly modern ones . Always remove the ecu before welding . I've welded on my dart and didint remove anything . But now thinking about it ,should the mopar orange box be removed before welding on a old mopar ? Doing some...
  10. yeah

    fuel cell question

    I have a cell in my car with a low sump . When hard cornering I had fuel slosh in the cell ,put foam in it solved the problem . What Johnny said is totally right . Put the foam in it .
  11. yeah

    Need another mechanic tip: lower ball joint studs turning with nuts?

    A absolutely agree with mopar Tim , that's how I did mine .
  12. yeah

    BluePrint Parts!

    Bought a distributor from blue print . Johnny mac is a great guy to deal with . I suck with ignitions and electrical things and he is very very helpful with explaining things to even a dummy like me haha . Thanks again
  13. yeah

    Frame rust

    Cut out what's rusted and weld in new pieces , or box it . That's what I did . Or if you have ton of cash replace all ! Or the first thing + roll cage , subframe connectors and j bars to keep everything holding together hahah .
  14. yeah

    Stolen Car Alert

    I'll keep on eye out on it in my neck of the woods , mount prospect and north shore area of il .
  15. yeah

    AAR Qty fiberglass or Glasstek hood ???

    I don't know if this helps but I have a glasstek pin on trunk that I picked up from them . Great quality and price also ! Fit great and had to do barely any body work to it before painting .
  16. yeah

    Installing torsion bars- shouldn't this be the easy part?

    Also , looking at the torsion bar crossmember , do the sockets that hold the rear of the torsion bar are fine meaning like they didn't break and somebody welded them clocked wrong ?
  17. yeah

    Installing torsion bars- shouldn't this be the easy part?

    Mine were a pain also . Screw out the torsion bar bolts that are in the lca . Unbolt the shocks then undo the upper control arm ball joint from the spindle and lower the whole lower control arm assembly . They torsion bars should slide in . Hope this helps and it makes sense , kinda medicated...
  18. yeah

    Reshape Fiberglass?

    Yea you will have to mess with them , that's for sure . Basically how mine worked , same principle as a tie rod sleeve . Turn one way spread apart , turn the other way gets smaller . My splash shield was comeoletely in the way , so o had to cut out a bunch of it .
  19. yeah

    Reshape Fiberglass?

    Hey I've had issues with my front glass fenders also . Don't know where they are from , could be 30 year old fenders . I solved it with a brackets that I made, that pushed out the fenders to align with the door . Made it so I could adjust it on the car to push it out as much as I needed it
  20. yeah

    Pro Touring or Custom Dodge Dart’s

    Dam !!! Mean
  21. yeah

    Pro Touring or Custom Dodge Dart’s

    1973 Dodge Dart , pro touring , road race build .
  22. yeah

    Trans shop/guy around Chicago??

    Hey there is a guy that rebuilt my dart trans in bensonville/ Elk Grove village il . He rebuilt my dads f150 trans my Jeep 5 speed . Great guy and good at what he does . Andys perfofmance transmissions . Pm me if you want his number .
  23. yeah

    Stock alternator up to the task? If not, how many Amps will I need?

    From what I know stock mopar alternator is only a 60amp unit . I would think you will need something bigger to run two fans . But if you do decide to go the bigger alternator route you got to be sure that your wireing will handle the upped Amps , because fire bad haha .
  24. yeah

    1966 Ferris Miles Westlake Dodge A/Sedan #72 Racecar

    Awesome!!! !!!!! Your car ? What's done to it ? Got any videos ?
  25. yeah

    Firm Feel Steering Box

    I'm using their stage 3 power steering box with a flaming river coupler . I can't compare it to any other brand, besides the garbage worn out box I had on the car . Ive had it in for about a year and I like it alot , def happy with the purchase , and they guys there a easy to talk to if you...
  26. yeah

    What got you hooked on A-Bodies anyway?

    always wanted a mopar . A beaked nose broken 73 dart sport was the only mopar I could afford haha . That was 9 years ago
  27. yeah

    What steering coupler do I need?

    Furyus2 is completely right, on everything he said
  28. yeah

    Had anyone updated to new wiring harnesses?

    I used the Painless wiring mopar kit and they should change their name to pain in the *** wiring . It sucked but it's doable , and I'm not that great at electrical .
  29. yeah

    hood vents

    I have hood vents on my fiberglass hood. I got the Jeep tj aluminum ones that I Recesed in the hoood and riveted them on haha . I think it looks pretty good and I do like rivets . I'll post a picture later .
  30. yeah

    Stolen

    Similar thing happened to a neighbor in my neighborhood . Stole tools and parts of his fox body . Also a area with no crime . F bastards , I pulled my guns out, installed cameras and put crazy locks on my garage .
Back
Top