Search results for query: *

Price reduction again, $2900 OBO

Willing to trade for a classic VW beetle.

price reduction, now @ $3100 or best offer. Still in Statesboro, GA, 50 miles west Savannah.

New bushings and ball joints on the front end New power steering pump, gear box is a rebuild, put on 5 years ago New plugs & wires Replaced stock brake master cylinder with one from stainless steel brake cooperation Currently installing new valve cover gaskets

1972 Dodge Dart Swinger 318, 4 barrel 650 cfm holley carb was told by previous owner it had a 727 trans, had it rebuilt two years ago and the mechanic wrote it up as a 904 disc brakes in the front, drums in the rear, 15" rims, dual exhaust flowmaster 40 series hood needs to be aligned. needs...

The pulley doesn't have spokes, I attached a copy of the bent one that's still on the pump, and the new pump itself.

I measured the pulley today, it's the V8 pulley. From side to side it measures 7" and is ~ 1/2" wide. @cudamark, do you have one?

I didn't see any numbers on the pulley.... do you want me to measure it or do you know where I should look? thanks

I need a power steering pump pulley for a federal style pump. not sure if they changed over the years, but it's for a 72 dodge dart, 318. I thinking around $20 ???

I need a pulley for a federal style power steering pump for a 72 dodge dart, 318. PM if you have one. thanks

I need a driver side strut rod for my 72 dodge dart. Mine is bent. PM if you have one. thanks

Car is located in Statesboro, Ga 30461. If more than two hrs away, I would recommend towing or putting on a trailer. what needs to be done: there's some rust and pin holes in the roof and around the rear window, the quarter panels need repair or replacing, the hood is misaligned. the car has...

was driving in Dublin, Ga, saw a car with a busted back glass. They had plastic covering it, but the plastic was held down by those small red bricks. I kept my distance.

I have a 72 Dart, some dings, some rust but overall a solid car. asking 4000. PM if interested. zip 30458

I have a 72 Dart, some rust, some dings. 318, 727 trans. zip code 30458. needs work, PM if interested. asking $4000

Decided to tackle some rust issues on the Dart today, got out the old sander and went to town. One thing led to another, and I'm pulling the trim off the back glass and pulling up part of the vinyl roof. funny how things can get out of hand. But, was sanding and sanding, and noticed that this...

I have one like that on my 72 dodge dart, goes to the alternator I think

Does anyone know if you need the speciality holley carb spacer part # 17-14 or 17-13 for a Holley 570 cfm carburetor? I have a universal one to fit a 5 1/8" neck and it won't fit on it, it gets stuck on the secondary flap (I think) thanks guys

Do you have a transmission kickdown linkage? I only need the part that goes from the carb to the first joint.

I don't think that engine is good for 650 horsepower. just my 2 cents

isn't there still a bracket holding the cables to the intake manifold?

awesome

I think yearone sells theirs for $119ish, not sure how much new connections cost. but if the wires aren't bent at extreme angles and the insulation is in good shape then I don't see a problem in doing it. good luck.

started putting in the harness. Course I had to pull the old one out. Took about an hour cause I labeled everything as I went since this is my first and hopefully last time doing this. I had some cut wires and some that weren't connected to anything. Does anybody know where I can get a wiring...

http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=1 the one for my car cost $119 + http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=1 $39.95 for the electronic conversion harness I don't think you really want this old harness, it's been spliced and respliced. but throw me some...

Thanks for the input, I don't know if it does have a heat riser valve. I'll have to look that up.

Got a wiring harness from YearOne.com in the mail today, going to put it in tomorrow. Here's some pics to see what I'm working with. what a nightmare.

72 Dodge Dart, rebuilt 318 Weiand 8007 action plus intake manifold, edelbrock 500 cfm carburetor If you look at the picture, there looks like there's a hole in the head on both sides of the engine. Not sure if the wrong part was used in rebuilding the engine. It doesn't spray oil out, so I...

I have a 72 Dart with a 318 engine with electronic ignition. the wiring in the engine bay is crap, it's been cut and spliced and the wires are all cracked. I saw this on yearone.com http://www.yearone.com/serverfiles/fbshopmain2.asp?hid=112AY9945 it's for a 70 A body with electonic ignition...

The windshield in my 72 Dart Swinger has a chip in it and it's fogged around the edges. Anybody have one for sale or know a good place or site to buy one from. thanks