Search results for query: *

Selling my 340 Six Pack Set Up. All three carbs have a fresh rebuild. The set up is turn key and ready to run. Comes with air cleaner, correct filter, carbs., Edelbrock intake, linkage, fuel line etc. Bolt on and ready to run. Everything is in excellent condition. Asking $4500 obo plus shipping...

Hi, I'm listing my 81' D150 for sale. Buying a new tractor or wouldn't even consider selling this truck. It has 43,000 miles and has always been in Southern California. Still has the Long Beach, California dealer license plate frames on it. It has it's original slant six engine with 4 speed...

67' and up A body Heavy Duty 4 Speed Pedal Assembly. These take bearings instead of plastic bushings at the pivot point. $250 plus shipping from So Cal 92584. Already boxed and ready to go.

Has anyone seen this or am I the only lucky one? One of my rocker arms doesn't have the oil hole drilled on the top. I've since removed it and drilled it myself. No damage at all to the rocker or shaft. Just curious if anyone else has seen this.

I need a nice header panel for a 67'-68' Barracuda. I'm located in So. Cal. PM me if you have one. Thank you.

I recently bought a 67' Fastback and the only real bad rust on the car is the rear glass window channel on the passenger side lower corner where the glass sets. Has anyone repaired this area before? It doesn't seem like a quarter panel will have this material on it so I'm assuming you'd have to...

Need nice header panel, grilles, back glass and most interior parts. Any help would be greatly appreciated. Located in So. Calif. I’m not restoring the car to original, just building a cool street car since it was missing everything when I got it. I know the header panel is...

I bought some emblems and they have two posts on the back with what looks like a plastic piece slipped over the cast posts. Do I need speed nuts or do these just press in the mounting holes? The emblems didn’t come with anything else.

I recently purchased this 52K original mile truck with plans of making it a sweet little shop truck. Something has come up and I may have to sell it so I thought I'd try here first. I've included a picture of the original build sheet so you can see the options. The truck runs and drives great...

Like new G-Force Racing Helmet. I bought it for 1 event and didn't use it again. It's a large. Asking $100.00 Located in So. Calif.

I have a NEW RAM clutch, part number 98766 that I bought for a project I had. Project is gone so thinning out some parts. Clutch is NEW just shows shelf wear. Comes with throw out bearing and alignment tool. Asking $200.00 Located in So. Calif. They're $419.00 new.

I've been saving these for a 4 speed project, but don't see one in the near future. Looking for $200.00 Located in So. Calif. PM if interested.

Holley 670 Street Avenger Edelbrock RPM Airgap Intake Edelbrock RPM Aluminum Heads Edelbrock Aluminum Valve Covers Speed Pro L2316F Forged Pistons 268HE Comp Cam and lifters Double Roller Chain New Timing Cover New Water Pump New Milodon Oil Pan All ARP Engine Bolts Included Hey guys, I'm going...

These wheels came on my 73' Cuda. Wheels are 14x7 with 5 on 4 1/2 bolt pattern. I bought 4 new 245/60-14 BFGoodrich tires and had them mounted and balanced with new valve stems. They are ready to bolt on and go. Also come with a complete set of lug nuts and all 4 center caps. $650. Located in...

This is a complete setup with restored air cleaners and linkage kit. Comes with new, never used intake and linkage kit, two 1920 Holley carbs. (should be rebuilt) and two restored air cleaners and filters that are in excellent condition. I will also include a factory throttle cable bracket. This...

Has anyone taken a mint interior that was a color they didn't care for and dyed it another color with success? If it's possible, is it worth it because you retain original pieces. Is it better or more affordable to buy all new and do it that way? Not looking for opinions, but advice from members...

Up for sale is my 1969 Barracuda. It's a factory original 318 4 speed with, 8 3/4 3.91 489 case sure grip, Kelsey Hayes disk brakes, 150 mph speedo with factory tach, bucket seats, saddle deluxe interior, sport steering wheel. The paint is the factory original F8 green with all it's original...

I have 4 new Monroe Shocks that I bought and don't need anymore. They are for 64-74 Dart, Duster, Barracuda etc., but will fit many models. The part numbers are 32022 for the front and 31131 for the back. They are new in the boxes and include all the new rubber pieces, nuts and washers. I'd like...

I did do a search for Pistol Grips in an A-Body and know which one to use, but what I can't find is how it mounts to my factory shifter. Doesn't the factory hurst shift handle have the slip in mount or are some the bolt in? If I have the slip in mount do I need a new shifter assemble that has...

I've heard when swapping to 73 and up disk brakes your track width is increased 3/4" on each side. Are the Kelsey Hayes brakes at this increased track width or are they 3/4" each side narrower. The reason I ask is because I installed 73 up disks on my last 67' Barracuda and was running the 5.72...

I have a 69' Barracuda with a 318 4 speed. It has a factory radiator measuring only 18" wide with no fan shroud. Did this come in small block cars or did someone change it out with the incorrect radiator at some point? If they did come this way, was there a fan shroud that fits it?

Hi, I'm considering an A-Body 4 Speed. I gravitate to original paint cars no matter what condition the paint is in as long as the car is rust free (no repaired rust as well). Not looking for a show car, but rather a car I can drive and enjoy. A V8 car would be best. As unmolested as possible...

TCI Big Block 727 with Lokar kick down cable. They came out of a project truck I bought for the motor and trans. I kept the trans as a back up for my big block Barracuda, but never ended up needing it. I drove the vehicle it came out of before pulling the motor and trans and it operated perfect...

I have a complete 5 Speed conversion set-up for a 69-70 B-Body. It includes... RS600 Keisler Perfect Fit 5 Speed with Pistol Grip Shift handle Big Block bell housing Hydraulic clutch set-up Flywheel Clutch Trans. mount Speedo Cable All new high grade bolts Asking $4000.00 So. Calif.

The air cleaner is in great shape. No dings or dents. Clean up, repaint and done. Asking $125.00 So. Cal.

I don't have a use for these so hope someone can use them. Asking $150****SOLD**** So. Calif.

These are just sitting on my shelf taking up space so hopefully someone can use them. Asking $50.00 each. So. Calif.

Bought this years ago for a project. Don't need it anymore. It's brand new in it's original box. Asking $125.00 ***SOLD PENDING PAYMENT*** So. Calif.

Sold the car I was going to put them on. They are NEW and fit 1967 and later A-Bodies with 108" wheelbase. Asking $100.00 So. Calif.

Hi, I'm looking for a Slant Six Super Six setup. Any help would be appreciated. Thank you!