Search results for query: *

Have a question about swapping in a 22 inch radiator. I have a 71 Swinger with a 225 in it. It has the factory 19 inch radiator. I know the 22 inch radiator will bolt in. My question is about the fan shroud for the 22 inch radiator. Looking at pictures the opening for the fan is offset. Will it...

Looking for an inspection cover that covers the torque converter for slant 6 with 904 transmission.

I’m swapping the drive gear out on the distributor. Is there any other nylon gear that better than the other? Or is one from Doman(local parts store has one) as good as any? My car is a 71 Swinger with a 225.

I have a 71 Dart Swinger that I converted from drum to disc. I pulled the manual disc set up from a 74 Dart Sport. The conversation is done and works fine but. I have a rattle from the passenger side disc brake pad. It started out as an occasional rattle but as the pad wears it’s getting worse...

Are the rear side window interior trim the same on 64 and 65 Dart 2 doors? What other years are the same? Picture posted of part I am referring to. Thanks in advance for any help. Have a great day everyone.

Looking for driver side tail light housing for 71 Dart Swinger. Must be in good shape, no cut wires or rusted bulb sockets. Thanks Ken

Anyone on here have a picture of an original bumper jack for a 65 Dart? I got one today trying to see if it’s original jack. Thanks in advance for any help.

I'm working on my 74 with 360/727 combination. My question is the kickdown linkage. When I got the car the motor and trans were missing. The 360 is 74. The intake is from a 71 340. The thermoquad is a correct 1974 carb #6454. The 727 is from a 1978 Dodge truck and has been rebuilt. I have...

I'm getting ready to replace the weather stripping on my 71 Swinger. It's the one that runs along the roof for the door and rear side windows. I wanted to know does it just pop in or do I need sealer to hold it in place? Any advice/help would be appreciated. Thanks

Bought this inverter and never used it. It's still brand new in the box. It's a 600W inverter. I paid $88 for it, have never opened it. Asking $65 shipped in the lower 48 states.

Recently picked up a 318 with points distributor. I can't find this part number in my book. I was told it might be from a poly 318 since the housing is cast iron. Can anyone on here tell me what it's for? Thanks

Looking for 71-74 b-body bench seat pistol grip shifter. Thanks Ken

Looking for decent stock flywheel for 1973 318, I think it's the 133 tooth. Thanks Ken

Where can I get factory style intake gaskets for 340/360 4 bbl intake? I have felpro gaskets but I don't like how far they stick up past the intake. I've been to 3 different parts stores and tried rockauto still come up with same felpro gaskets.

I want to swap my cast iron 1971 340 thermoquad style intake for an aluminum intake. Most of the ones I've looked at have provisions for an egr or other emissions. Anyone know if there is an aluminum intake similar to stock intake without the egr provision?

I'm looking for a decent 71-74 B-body bench seat pistol grip shifter. Figured I would try here first, let me know what you have. Thanks

As the title states can anyone help identify these?

Anyone know if the rear frame rails and trunk pan from a 75 Valiant 4 door will work in 67 Dart 2 door? What about the front frame rails?

Having a problem I hope someone here can help with. I switched my Dart from the small bolt pattern to large bolt pattern wheels. I used axle shafts from Doctor Diff. The backing plates came from a 66 Dodge Charger. When I did the swap all brake hardware and shoes where new. I need new wheel...

Looking for a 3 speed manual floor shifter for 71-74 b-body.

Picked this gem up today. 75 Valiant Custom 225 auto trans. It's a complete car other than missing gauge cluster.

It's time to rebuild the 904 in my 71 Swinger. The motor is a stock 225. I have a couple converter questions. First: is there any difference between a converter for a slant 6 and one for a V8 904? I know later converters can be lock up and non lock up. Second: I swapped an 8 3/4 rear with 3:55s...

I need to replace the power steering pump on my Dart. Is this a federal style pump? Thanks for the help.

I need to swap a new tail shaft housing onto my od trans. Other than unbolting it is there anything else that needs to be done internally? Or is just pull the bolts and swap? The unit I have came from a 77 Volare or Aspen I don't recall which. Thanks Ken

I have couple questions. I have a 67 Dart GT, the firewall & cowl need work. I was concidering buying a Dart parts car. First question are 67 through 75? the same? Will a 4 door firewall and cowl work? I'm not worried about minor cosmetic differences. The car won't be anything close to...

I did a disc brake swap on my 71 Swinger. The car originally had 9 inch drums all the way around. The donor car was a 74 Dart Sport with big bolt pattern manual disc brakes. The problem after the swap is I have to push really really hard on the brake pedal to get my Swinger to stop. This is a...

Up for sale Holley 600cfm carb. It came with a bunch of parts I bought. I never ran it. Carb has been sitting in my basement for several years. Everything moves free, has an electric choke. It's pretty dusty from sitting on the shelf, I would rebuild it. $60 shipped to your door in the lower 48...

Have posted in FBBO but that place seems to be a ghost town so thought I'd try here. I'm looking for a k-frame for my 73 Road Runner. I was told 73-79 2 door b-body k-frame will work. It can be a small or big block k-frame I don't care. Must be in good shape I already have rusty junk don't need...

Looking for left and right biscuit style motor mount brackets for 71 318. Anyone have a set they want to part with? Thanks Ken

I'm looking at getting this style Demon carb to replace my thermoquad. My question is what CFM? They list a 625 and a 750. I was leaning toward the 625 at first but after doing some research it might be to small. The motors is a 440 auto trans out of a 1978 Dodge truck and is completely stock...