Search results for query: *

Well I've got the chance to pick up a Dana 60 with 4.10's and a posi unit that came out of an early 1970's dodge pickup. The guy said the measurement was 56 3/4 inches from backing plate to backing plate. My question is, for $250 bucks, is it worth picking this unit up? How much modifying am...

Hello- Was wondering if anyone had recommendations on a vehicle transport company? I need to ship my duster from Dallas, TX to Washington State. I just don't want to get ripped off and would appreciate any recommendations on good companies you've used... or ones NOT to use too! Thanks

I have a set of standard bore Keith Black 190 pistons for sale. These pistons are basically brand new, I used them to mock up an engine so they have a few marks but they've never been in an engine that was fired. These are high compression pistons with a .050 dome top with valve reliefs. Comes...

Hey guys. So this is a start up of my newly rebuilt 360. New Cam, pistons, intake, etc. etc. This is a few days after cam break in was completed. Had no problems before. You'll notice some noise right about when I get up close to the engine with the camera. Does anyone have any idea where...

Hey all, I REALLY need an engine hoist to get my 360 put back in the Duster. Problem is, I only need one for about 3 hours and I don't want to shell out 350 bucks for one to sit in the corner! Does anyone know where I could possibly rent one? Or does a local FABO member feel like renting one...

Well, I just finished buttoning up my first Engine restoration. I pulled the 360 out of my 71 Duster to freshen it up and add a few parts to wake it up. Ended up putting in new KB 107's, Lunatti 268 cam, restored some old Iron heads with some port/polish work, and topped it off with an Eddy RPM...

Would anyone be interested in trading a manual steering box for my stock power steering set-up? All parts work perfectly, have all parts, brackets, hoses and bolts. Need a good manual box that is tight and working well. Interested let me know!

What is a good single spring that would handle about .515" of lift? Lunati recommends a double spring for my new cam, but i'd like to stick with a single spring so I don't have to have my heads machined.

I know there are a ton of these threads, but I'm interested in a ballpark figure for how much torque my 360 should be pushing. 360 block .060 over KB 107 Flat tops Iron heads with small 1.88/1.60 valves, gasket matched and ported (don't know flow numbers) Lunatti Voodoo 268 cam, .494/.513 lift...

I've got an older style M1 Mopar Intake. Don't know a ton about it but looks like a good Intake that someone spinning High RPM's could use! http://dallas.craigslist.org/ndf/pts/2481791800.html

I have a set of brand new (mocked up on engine but never ran) KB 190 pistons for a 360. These are high compression pistons with a .040" quench. Standard Bore. These are $240 at Summit. They have been pressed onto a set of stock 360 rods in very good shape. Would like to sell the whole set...

Just wanting some opinions on what direction I should take my 360 build. This will be a 95% street car that I want to be a beast out of the hole, won't see much time past 6000 RPM. As of now the engine is a stock stroke 360, i've got KB 190 pistons, an old speed pro cam that's [email protected]"/304...

Can anyone help me identify this cam?? It was in my 74 360. I couldn't find much info! The stamped numbers are 1177, CS178R, and i THINK GWC. I can't get pics to load but if it would help to see I'll try and get some up.

Just did a compression check on my 360 since I was having problems starting, ALL cylinders were between 55-75. Wet check didn't seem to help much if at all so i'm pretty sure it's not my rings, which are brand new anyway. What would cause EVERY cylinder to have low compression like this? This...

I'm having some ignition problems with my 71 duster 360. Is there any Dallas members that know a good mechanic I can just talk with to bounce ideas off of? Or if there are any FABO members around here that want to help a guy out?? I need some help diagnosing my problem!

Ok guys... I just got done getting my 360 all put back together. I tore it down to put some higher compression pistons in it about 3 weeks ago. So last weekend I got it all put back together and went to start it and.... nothin. It just cranked and cranked. So I checked fuel at the carb which...

Alright guys quick question... I just ordered some KB 190 pistons (slight dome w/ two reliefs) for my 360. I want to increase the C.R. to about 10:1. These pistons are rated at 10.5:1 with 72cc heads. I am also getting some 596 heads which are advertised right around that 72cc. My question...

Does anyone know a reputable speed/performance shop in the Dallas area that could swap out my old gears for some 3.55's?? I swear I can't find a single shop around here that does anything with rear diff's!! Any help would be great!

Hey Guys... So i'm thinking about taking my 71 Duster to the next level with a single turbo. Question is, how much do you think i'll be into it to have a solid kick A street car? Car is a stock 360 with a mild cam, 750 Holley, Headman headers, 2.5" exhaust, and 3.55 gears. My goal is probably...

Hey guys... some of you may know better since I'm somewhat new to Texas. What's the best (fairly priced) paint shop in the North Dallas area? Any help would be great!

Hey Everyone, just wanted to introduce myself real quick... I've been watching this site for quite a while and I love it!! My name is Joel and I just bought my first mopar about a year ago. It's a 71 Duster, original /6, now has a mild 360. I'm in Texas going to chiropractic school right now...