Search results for query: *

I will try to send some pictures later this week, no time at the moment! It's not all that bad, that is if you don't mind a challenge. My 65 Valiant was a v200 (273/904), the trans cross member works!!, The K frame works!! You will need to move the steering box towards the fender about 3/8" of...

Thanks pishta, I will take this into consideration!

I have a 65 Valiant with a 383 and stock 69 manifolds!!! It can be done!

I agree with you AdamR, I was wondering if a 67 fender well header might fit, or how close it would be to fitting? I am prepared to make the necessary mods if they are close to fitting!! Nothing fits on a BB in an early A body anyway. But then again I did want a chalange!! Thanks

Wanting to talk to somebody who has a recommendation for Big Block fender well exit headers on a 65 Valiant. I have found lots of info on the later A bodies, but nothing on the EARLY A bodies !! I am open for suggestions. HELP!!!! Thanks!

I have a 65 Valiant with a B 383 and stock manifolds. Does anyone out there have a sugestion for a fender well exit header. I found lots of info on the later a bodies, but nothing on the EARLY A...65. Help!!!!

My buddy has an A Body 8.75 sure grip, SBP, 489 casting, 430 Richmond Gears rear end for sale. Complete with drum brakes. I don't know anything else about it other than it is in good condition. He is asking $1150 for it. If you will drop me a note I will send his phone number to you for any...

Thanks moparmat2000, These part numbers will help out greatly!! Good luck on your build!

Thanks 75Sport, I see lots of good stuff and prices at this site!!

Moparmat200, would you happen to have the part #No. for the GM style brake caliper w/e-brake and maybe the bracket #? I can't seem to find them on Speedway. I have the disc 11" new! just can't find the calipers and brackets!! thanks

are you wanting or trade for disc set up?

741 casting, came out of a 1971 dart. Would be willing to meet you in Hempsted or Conroe.

By the way, this also comes with springs, hangers and new U bolts!! COMPLETE, ready to bolt in!!

Need to sell!!, 1971 8.75" A Body Rear End. Original 26K miles, complete minus the yoke. 276 ratio open. Primed and painted. COMPLETE... cables, drums, pads. May need new seals. Very clean! I put it under my 65 Valiant and never drove it. I am swapping it out for a narrowed rear end. Asking $500...

That sounds like a fair offer John, however I purchased a 71 Dart Swinger and a Grand Fury for $700 on the same day I posted this request. What luck, after talking to everyone in Texas I picked up these two only 6 miles from my shop! Will be parting them out. Need some parts? let me know...

Thanks damraider, you are correct, it would be hard to find a complete rear end for that price. I found a 71 Dart Swinger, and a Grand Fury for & $700 the same day I posted this post. Bought them!!! Thanks again!

Looking for an 8 3/4 rear end for my 65 Valiant project, nothing too special, just a good solid rear end, suregrip or open, geared around 3:55. Must fit A-Body 55.6" I am in central Texas. thanks

Assuming this is a pre 1973 (A Body) rear end? Is this unit complete with brakes and perches etc.? I am looking for a rear end for my 65 Valiant project, nothing real special, just a good complete rear end with hardware! I am interested, Thanks, Dane

Thanks to all for the info.! Yall have been greate help. I think I will go on the hunt for a 8 1/4 rear end.

Thanks for the link Old Tired Rebel, this is the type of info I was looking for!

Thanks for the advice 66fs; stuffing the BB is done with a few bad words a little blood and a lot of patience! Thanks again for the help!

:shock: I am building a 383 65 Valiant and have some guestions about donor cars for rear ends and disc setups. Does anyone know of a site that can tell me what parts will interchange and fit my 65 V200? What cars will have what I need? Thanks!!

:scratch:Need advice! building a 65 V200 Valiant and am having trouble locating an 8 3/4 rear end. My stock rear end measures 53.20" flange to flange, and a spring centerline of 43.02". I'm looking to purchase a donor car so I can also use the front disc setup as well as the rear end. Does...

Chris, I am in the process of building a 65 Valiant V200 with a 383/727. Yes it does fit!! not well but it does fit. You may consider milling the left (driver side) exhaust manifold about 7 degrees, this will allow a bit more room around the steering shaft, you will also need to use a u-joint on...

I'm sorry mrbadwrench, I would like to sell or trade 273/904 as a package deal. I just can't use items you are willing to trade, I hope you understand. Thanks a bunch!

Need to sell or trade a 1965 Valiant 200 273/904 2B engine/trans match set, complete, runs and shifts. Original 37K miles. I have not been into the engine so I am not sure if anything has ever been done to it other than normal PM work. Solid lift engine and cable shift trans. Pulled them out of...

Wow! they do similar, just has the other eye blacked ! thanks for the welcome!

I'll have to check out your coatings, I run a custom chrome shop and am always looking for cool coatings! Thanks for the welcome!

I didn't know my wife had a twin!! Thanks for the welcome.

I hear ya cuda guy, I grew up at south padre island texas, cars didn't last long down there! Thanks fer the welcome!!