Search results for query: *

nice car was finished up last year numbers matching fender tag no build sheet this car is all fresh top to bottom fully detailed undercarriage car has no rot all org panels never replaced all spot welds are there cali car inside is dame near mint needs upper dash pad every thing works this is...

I have a set nice 68 correct dart gts caps chrome is nice silver needs to touched up in the center but they are the fake lug nut caps they are about a 7 on 10 scale what do we be leave is a far price for them Ive seen them from 400 to 1000$

i found two shrouds trying to fig out if they will work on my 68 dart 22" rad 340 first one 3691917-2 42166 second one 42166 3859837 that 5 maybe a 6 i cant tell for sure thanks for the help guys

let me know where you will be ill be down all week maybe abel to hook up with a few guys chubs

looking to buy a nice oem shroud for 68 or what ever other year carrys over 340 dont want some thing thats busted up will pay good money for the right one chubs

just wanted to let you guys knows just for the hell of it incase some one is looking for a cheap fix or to see if it helps i added a one inch plastic carb spacer from mr gasket it did away with a good junk of my low end stumble say 1300 to 1800 rpm cars a 10/5 to one 340 500 lift cam...

this motor was in the car all ready and ran very good so i didnt see a point in tearing into to it so the internal parts are a pretty good guess been around alot of cars so u get the ideal of what your working with stock bore 10.5 mild purple cam x heads stock stock intake elc ing 750...

so my b bodys just pulled out i tryed for a bit and could not get mine to pull out and didnt want to hurt the pins till i knew better so whats the trick theres a tab that hangs lower then the ip behind my metal filler panel how can i clear all this undo the the wires first that i cant see or...

looking for a oem shroud for 68 dart 340 if any one can help that would be great

i have 68 hp manifolds on my car used the felpro gaskets on the collector side where it meets exhausts the one side leaks after like 500 miles i hate paper gaskets do they make a metal or brass or aluminum upgrade for this

727 68 340 x head motor 10.5 to 1 750 eddy elc ing mild purple shaft cam stock hop manifolds stock intake i may change that to some thing close not to crazy pretty much a stock motor was fresh last year when i got car i have no details on motor just going from general knowledge of how the...

i have a few converters wraped up in the garage from few mopar builds and i cant remember or find much info on this one so i dont know to toss it or what its a mamco converter 5767 on the external weight < that should help narrow it i think reads 15 g maybe grams? 5 97 and its a 11"...

i have a 500 #1403 edelbroke was on a 318 when i got bought a raged out car to part down car ran really solid for a 318 with mild came sold motor have carb no use for it i think it has been up jetted at some point for how good it ran on that 318 carb needs to be cleaned outside mostly dust...

i have a 68 dart 340 motor was rebuilt before i got the car my best guess is close to stock 10 or 10.5 to one like a mild purple cam x heads stock intake elc ing pretty much just a stockish street rebuild im looking for a carb i just street drive it and some longer high way trips not...

just wondering if any one knows in 68 if my dart should have a vented cap or not?? was a cali built car with 340 think i may have a vapor lock issue starting and trying to norrow down where it may be at

ive been having a issue with my column getting sloppy well i took it apart i think im missing a spring and some kind of centering bushing i think that goes on top of the collapse tube just below where the gear selector would go. if any one has any ideal on where to get these parts or has...

i have a mild built 340 10 1/2 motor stock carb elc ing med purp cam x heads stock intake not a crazy motor just nice mild car book says 5 degrees i set it to that ran like crap i went to 10 seems better but this car is a straight dog i think my wife's cavalier is faster lol ive done all i...

i went to power kelsey hayes breaks all new master is 1 and 8TH bore new booster bought as kit from right stuff all new lines every thing bleed breaks fire car up started going thru check list on every thing sense whole car is fresh noticed pedal is nice and high but seems a bit stiff and...

im running a 8 3/4 Stockton wheels i think there 4" back spacing cant recall running a 245 tire i trimmed the wheel lip some but still have a slight rub only on drivers side heres a pic of my clearance i was thinking of buying a hellwig rear sway bar but not sure if it will even help guess i...

so i got my carb back from rebuild finally got to fire car quick trip around block was adjusting the idel speed and when i finally got it where i like it normal idel not low loppy just a safe 700 800 ideal i noticed that bowl vent was open. is this normal because at this point the car was off...

i installed new gear box and installed the new o rings on all the parts that swap over. ive tryed to tighten this fitting 5 times maybe im doing it wrong any one have any input on this. there is large fitting wit hex head and a brass fitting with a o ring in the middel of the threads that go...

im looking for 7/16th lugs i think they are for my small bolt pattern 68 dart i need chrome capped lugs not open so i can run them while my hub caps are getting painted sense my wheels are fresh paint will look good till i get them back. i need 15 right hand threads and 5 left any one know...

2785312 big block fan shroud mint no cracks one lower hole is a littel larger then the rest but you wont be abel to tell when you install the bolts and washers that i do not have rad 2445631 >>> big block ?? lower hose exits drivers side upper center trans line hook up so i would say auto...

http://www.yearone.com/yodnn/tech/TechFAQ/WheelsTiresBrakesFAQ/MoparBrakeLinesValves/tabid/422/Default.aspx

did mopar have a marked 3/8 hose for the brake booster and pcv valve or was it just black line with no markings i know my heater lines have penta stars and if they did have markings where can i get some and on another note i bought all the org style pinch type clamps and im having hell with...

numbers i have are 2785 312 95511 bought from another member with rad said it was 69 340 well my rad is a 68 looks the same as the one i got from him. my issue is i got a new viscous clutch fan witch measures the same as stock fan i took off well i think its...

just like it said need brackets only have every thing else mine are messed up pretty good thanks

Ive done the swap now just doing final work on it all i need a vacuum point for the booster i have a CALI carb on my car sense thats were it came from only two vacuum points one small one for the dizzy and one large one witch is where the pcv is hooked up i was thinking if i tee into that would...

what plugs go you guys think a mild build 68 340 stock 650 carb mild cam elc ing would like to run i have champions in there now not sure if im better running a bosh or any thing else thanks

i really need a good number for the front rubber lines no one seems to have any ideal what im talking about at the stores no listings and ive called some of the bigger brake swap companys and there no help can any one please give me a good number on lines they know work and i could use a...