Search results for query: *

Thanks for response. This RV cam makes power off idle and it is done at 4800 w/355 gears I'm in second gear in what seems like a blink of an eye. Before the fbo plate I was at 15 initial and 38 total the total on the plugs looked good but the idle was dirty, so 20 was where the vacuum stopped...

I was trying to bring it all in close to the converter stall. Is that not correct?

Gentleman. My 360 smog block, alum head, 204/214 cam, stock converter, 69 dart likes 20 initial and 38 total. I'm using today an fbo plate at the 18 slot and changing the heavy spring for the light one in the kit. I have slight detonation at hard throttle. Should I switch to the 16 slot or jump...

Hey guys. This is what I found under the cam gear. 4 bolts, no dripper. Is this acceptable ? If not where can I get what I need? Thanks guys

Hey neighbor, I had basically the same set up you have there in the same car. I bought a Cold Case Rad and repop factory plastic shroud. So far so good even in town.

IMO, You can't buy or rent residential real estate right now. Just sell......it's a *****

Wolfman! 66 Big time radio WNBC NY! .....Who knows that?

James, the noise is coming from the upper bushings that are assembled with both shells right out of the bag. How do you grease them, take them apart? Pretty sure it would take a hammer, bushing driver and vise.

The upper bushings are assembled, can't lube. The frame is tied. I can't get enough adjustment with the front lowered, it wants the torsion bars back up. Do the bushings in the QA1 ucas squeak? Sorry I'm not great with the computer

Good morning all, rebuilt the front end on my 69 Dart vert with pst poly kit, lca stiffing kit, 103 bars adj strut rods lowered the car an inch or so. It squeaks bad and won’t align. Question : should I try moog 7103 offset bushings or tubular arms? If so which ones? Wknd car 2k miles a year...

RIP Mr Norm. We all have the koolest cars in the world! Let's move forward in fun!

Its a stock 76 short block, I bore scoped it when I checked the pressures. (dish pistons) I didn't install the cam, po gave me the cam card when I bought the car. It does run out of steam about 4800-5000 but gets there quick.

Shoulda thought more, long week! 204/216 650avs , headers, 355gear

Joe, I have that cam in a 360 W/.039 Head gaskets, eddy heads ootb in a dart. Stock converter, short tire. .Rusty's right 165ish cyl pressure. Pulls right off idle. Hope this helps

Righty, I'm sorry this happened to you. Every winter I think of changing to that cam in my stock eddy headed short block 360. Then I see this post. I work on heavy equipment, the parts for everything are made like junk now for lack of a better term. I'm gonna keep my 204/216 crane. Good luck...

Good morning all, With the corona scare I have had time to change control arm bushings(poly pst kit), box lowers and install 103 torsion bars and adj. strut rods. I cut the lower bump stops in half because I'm trying to get the front of the car down a little, it was way high. When I reassembled...

Hey guys, rebuilding the front end on my 69 Dart Conv.. Bought PST adj strut rods. Should the bolt through the heim joint be horizontal or perpendicular to the ground? Have a great weekend! Thanks in advance

Tim, I welded the Mancini bolt in connectors (same as mp) in my 69 Dart conv today. You will have to trim the outside rear more than you want to get them to fit with the torque boxes. So I just drilled a bunch of 1/2 inch holes in what was left for plug welds. I had to move the parking brake...

Replacing leaking top cylinders on my 69 dart. Noticed rope caulk like white stuff [still a little plyable] that side panels would stick to when I reinstall. What is it and where might I it? The less rattles the better! Thx in advance

Look at the ones from Mancini racing, put one on my Dart, love it!

I didn't want to get into the cam, I just wanted to put the rockers on top of the cam I have now. Talked crane and they said it would add 30lift and about 4 duration.Puts it real close to a XE262H specss with alot less work. I'm just wondering if theres a down side.

Have a 360la that was out of a ramcharger w/5000 mi. on it, put it ina 69 Dart headers,eddy heads, 650eddy on a 318/360performer ,msd ,crane h260-2 cam 427/454 260/272. stock converter, 3.23 gears, 24intire street car. I feel the motor is under cammed for the application now. I want to install...

Hey guys thanks for all your help inthe past! Want to put BFG T/AS on my 69 Dart conv. . Has stk 14in. road wheels no suspesion mods. How wide of a 60series can Iget with out rubbing spring.

:sign3:hey guys I have a 69 dart conv. with a 360, I think I'm leaving alot of power on the table,eng. was built for a ramcharger.It has edelbrock performer heads a performer maniflold not rpm performer and 650 carb also edelbrock.msd,headers h pipe 904 trans. and 3.23sure grip.The cam is a...