Search results for query: *

I have a brand new Quicktime RM-947 flex plate that fits mopar 6 bolt crank, for use with a GM transmission. I've never used nor mounted it. I've had it longer than the return window (about a year) so I cannot do a return. I was going to use for my 8 speed swap to my LA but there is now flex...

Disregard, thinks carb is fixed. I have a friend near Orlando (more east) looking for a mechanic to help tune his GM car. It has a big block, somewhat modified, and a Holley 750 carb. He thinks the carb needs tuning, but could be related to engine to (like timing, etc.). He would like to...

Looking for the Firm Feel column extender so I can use my original power steering column when switching to a manual steering box. Firmfeel Mopar Suspension and Steering Thanks

I searched the site looking for the answer as I know I read it a long time ago but couldn't find. I am wanting to run manifolds instead of headers for a modified 318 (less than 400hp) for a mostly street car. I didn't want to lose low end power or deal with any header issues. My friend...

1. Bronze gear drive for your solid roller cam. Used in my engine and went with a new one with a complete engine rebuild. $100 plus shipping. 2. chromoly ball/cup pushrods, used in my engine... straight. again went with all new during rebuild.. $150 plus shipping 3. Oil pick up tube, was used in...

As I continue to struggle with my garage aspiration (contractors, County nonsense, and materials issues), I am looking at VersaTube so I can assemble the building myself. I am looking at a 34 x 34 x 12 building. Using their building planner on the website, I've made 2 styles: frame only and one...

I got a set of SM 68cc CNC heads on the way from the black friday sale. I really wanted the 65cc heads but they were out of stock and you couldn't order them for the sale. Using a compression calculator from Summit, I am showing a CR of about 9.16 to 1 with the 68cc head. I really wanted to...

I am getting ready for the "hopeful" black Friday sale this year for a set of speedmaster aluminum heads. Just look at the current prices and for a set of hyd. flat tappet heads are 1180ish for the 65cc chambers. The roller heads are 1820! I already have a set of springs from my cam kit; is...

I've been looking to use a Dakota aluminum driveshaft after I do a transmission swap (don't want to shorten original shaft, so need another one anyway). I was currently planning on using the 42RH so the shaft/ yoke would be correct on the front end. The rear would need a u joint to work with...

Engine is done, so I am unloading my older used parts, all were for my 440. I have pictures for all which I can send or get specific pictures at your request. Here is the list: 1. Full set of chromoly pushrods (#s on them - 63031, SLMS-4130, MIL-T6736-A, name might be Simmons or Simmes?) look...

I have a used RB oil pickup tube which I no longer need. It is longer than stock as my oil pan was deeper than stock. Some pics here with the measuring tape plus I can take any others that you might need. $25 shipped in the U.S.. In Fayetteville GA if you want to pick up.

I have the alignment tool for the 42rh/46rh overdrive units, might be same for RE versions too. Transmission is done so I don't need it anymore. $85 plus shipping (should fit in medium USPS box). I am in Fayetteville GA for pickup as well. Please message me. Thanks

Engine is done, so I am unloading my older used and some never run parts, all were for my 440. I have pictures for all which I can send or get specific pictures at your request. Here is the list: 1. Harlan Sharp roller rockers, 1.5 ratio, (evaluated by Harlan Sharp and I have letter stating...

I have a set of pushrods in my spare parts pile, came from my 440. They are 9 1/4" with a tape measure. All roll fine on a smooth surface. $50 for the set plus shipping from Fayetteville GA.

Brass gear distributor drive, nice shape - $75 plus shipping, located in Fayetteville GA This is from my 440

Iron water pump and housing, part # on housing 2780987 ...date 4-10-69 - $50 plus shipping. Located in Fayetteville, GA

I have an Indy one piece aluminum valley cover, mocked up but never used on running engine. Went with a 2 piece design instead. Located in Fayetteville, GA $50 plus shipping.

143 tooth twin disc dual metal flywheel, Hays part # 21730. Looks to have new insert, also has twin disc bolts - $175 I bought an entire setup from McCleod and it comes with a flywheel, so I don't need this one. Located in Fayetteville, GA

I have a set of unused Indy offset rockers for 440-1 heads. I've had them a long time and I went with a full set of Harland Sharps instead. There are a total of 8 rockers. Asking $210 plus shipping for the set. These are located in Fayetteville, GA.

I am looking for the small block intake comparison chart/list someone made that had the port sizes, carb heights, etc. in it but cannot find it. Does anyone have a link to that thread, I've seen it on here before but didn't save the location. The reason I am asking is I am going to do a shaker...

I am rebuilding a 94 42RH trans. It is all built except the O/D unit. I am using the ATSG manual as a reference. I've figured out that I have the "first design" level. According to the manual the steels I need for the direct/OD and O/D clutch packs should approximately be .070 thick. My mic...

A friend of mine found a dashpad for sale in Innisfil, Ontario, Canada, so I was trying to see if any members were near there could help. I know it isn't an A body part, but this board has a large amount of members. I've tried a few other boards that I am a member of as well. If anyone would...

I have a question about the drive by wire system. Does the drive by wire pedal send a signal to the computer then to the drive by wire throttle body? Or does the pedal send a signal to the throttle body first, then to the computer via a throttle position sensor? What I would like to do is...

I am looking to put up a detached garage and I am leaning towards a metal building (for the following reasons: price, ease to install, no termites, and strength). The size would be about 30' X 50' X 12' (for a lift) and built on a slab (haven't poured yet). For those of you that have installed...

Have a set of Plymouth dog dish caps for sale, came stock on 67-69 cars. These are in good condition, needing polishing and some touch up paint. I would like to trade them for the "PLYMOUTH MOTOR DIVISION" caps or just sell them outright. $60 plus shipping. These are located in south jersey...

PST, will you guys be at Carlisle this year selling parts? Also will you be able to give the a body members the discount as you do for regular orders? I am looking for a new set of 1.03 t bars for my e body and was hoping to pick em up at the show and save on shipping. Thanks, Mark

For sale is a 74 Duster grille w/ headlight surrounds (with bolts) and turn signal lights. All tabs/ mounting points are unmolested. Grille is in very good shape, just a few shots of touch up paint. "Plymouth" trim on top has two spots that can use a little help. Headlight surrounds are...

Looking for a pair of 73-76 a-body disc brake spindles near the philly area, preferably south jersey for easy pick up. Part # are 3402626 and 3402627 on the upright. I have a pair of 10.87 disc caliper brackets, pin type, if interested in trade or I would like to buy outright. Please let me...