Search results for query: *

I have a cast bell housing out of a 67 or 68 barracuda $75 plus shipping. The opening is 4.30. The bell has the bracket for the clutch fork and a new rubber boot. The fly wheel is 122 tooth and was resurfaced before being put on the shelf. $75 plus shipping. The items are located on...

I have a bellhousing cast number 2806081 and flywheel for sale. Fly wheel was resurfaced beforenit was shelved in the garage. I believe it came out of a 67 barracuda with a 273. Both in very good condition. The parts are located on long island in new York. Make offer.

Just picked up a 340 from the cousin of a friend. He did not know much about the motor as he received it in a trade. As far as I can decode it is as follows: Block 2780930 date 6 30 70 Heads 3418915-G J heads Intake 3512100 date 6 23 70 Pistons marked 030 and have 4 small half circle...

Anybody know where I can get the studs to bolt scoops down to the hood. I only need two studs and 4 of the nuts. I did find a complete set for $100 at the PADDOCK but they do not sell them seperately. For my amusement I asked how much shipping would be for the complete set (16 studs and 16...

I am about ready to completely rebuild the front end of my 70 dart with 73 and newer brakes and all new suspension parts. It is a /6 right now but will be a 340 in the near future. I want to upgrade the torsion bars while I have everything apart. I am thinking about buying a set of 1.0...

I am converting my 70 dart from sbp drum to bbp disc brakes. My question is I want to order a complete stainless brake line kit but not sure for which year I should buy. When I do the conversion I will be using a proportioning valve from a 73 up disc car. Do I buy the stainless kit for a 73...

I have to change the wiper motor in my 70 Dart. I am trying to remove the middle portion of the fake wood dash so that I can get the radio and heat and A/C controls out of the way so I have a straight shot at the bolt that holds the linkage onto the motor. I feel like a moron but I can't get...

Still can not get my wipers to work. Anyone know where I could get a new ballast resistor for a 2 speed wiper motor. I want to try replacing the resistor before I go ahead and buy a new motor.

The wipers on my 70 dart with 2 speed wiper motor stopped working. The wiper motor is getting juice and the switch appears to be working. When I turn on the switch you can hear the motor making noise at both speeds. I checked the linkage and everything appears to be in working order. I...

I have a 72 318, stock bore, edelbrock performer cam, edelbrock performer intake manifold, 302 heads with mild porting, stock exhaust manifolds, 3:55 sure grip. Right now I have a Holley 650 carb on it. Is this too much carb for the motor. If it is what size carb should I look into. I was...

Looking for a pair of plain jane 15" by at least 6" wide BBP steel wheels that will accept a 9" dog dish cap.

I have been pricing front end parts. I contacted Performance Suspension and they have a poly kit for my application for $290. I asked if the ball joints and other parts are american made. The rep stated that he gets his stuff from Federal Mogul and cannot guarentee that all of the parts are...

I am doing a disc brake swap on my 70 dart. I have the parts from a donor 73 duster. Unfortunatley I was not able to get the proportioning valve from the donor car. I will be going to a manual front disc/rear drum set up. Anybody know where I could buy the correct proportioning valve for my...

I am just about ready to do a disc brake swap on my 70 dart and while I am at it I am going to rebuild the front end. I have the spindles, calipers, dust shields, rotors, upper and low control arms from a donor 1973 duster. My questions are: Can I use the lower control arms that are on the...

Just wondering if anyone knows where I can purchase the throttle cable stud that bolts onto the throttle lever and allows the clip on the end of the throttle cable to slide over. I believe it has pre drilled holes in it for a pin to keep the throttle cable from coming off and the other side for...

Just figured out how to post pictures. Here are a few pictures of my the latest addition. 1970, 225, /6, 904. All original paint and in real good shape for a Northeast car. http://s732.photobucket.com/albums/ww330/limopar/

Anyone have SBP disc brake setup for 70 dart. I have drums right now and want to go with discs. I have SBP wheels all around and do not really feel the need to go with the 73 or newer set up. Also looking for 8 3/4 a body rear housing in the NY area. Let me know.

I have a 72 dart w/318 with power steering and a/c. I have removed the a/c. Could anyone give me an idea of how the belts should be installed now that the a/c components are gone. My crank pulley has 3 grooves, alternator has 2 grooves, fan belt pully has 1 groove an power steering pump has 1...

Just wondering if anyone out there has used the scarebird disc brake conversion. I have a 70 dart with manual drums all around. I was wondering how hard the conversion is ie, master cylinder, proportioning valve ect. Another question I have is whether mopar steel wheels will clear the Chevy...

I have been looking around at new rear leafs for my dart. My options are the following: $320 for mopar perf XHD $280 plus shipping for Espo 6 leaf 1" over stock $220 with no shipping for a pair of 6 leaf from a seller on ebay called springking. $480 plus shipping from Eaton Springs in...

Where is the best place to get good quality drivers side front and passenger side front floor pans?. Anybody recommend a good replacement carpet?. Thanks.

Is anyone familiar with the Hurst Indy shifter setup part 503-0032. It suppposedly comes with the shifter mechanism, new rods, swivels, bushings and plates for the tranmission. I was told that it will work with a new process 422 transmission. I have an A833 from a 68 barracuda in my 72 dart...

I have a 72 dart with 4 speed. When I did the swap last year I used a set of original shifter rods, and an original shifter mechanism that I thought was in good shape. The last couple of months my shifter has gotten stuck in gear 3 times where I had to drive the car home in 3rd gear. I would...

What do you think a 1975 Dart sport, /6, a/c, 7 1/4 rear, is worth. Other than a couple of small dents in the drivers fender the car is EXTREMELY clean and original. There is absolutely no rust at all as it has been garaged its entire life. The guy said he wants $3000 but I think I could get...

I have a 72 Dart that I am going to be putting a 340 into. I came across a set of manifolds casting numbers 2863553(drivers side) and 3418623(passenger side). Anybody out there know if these are the good HP manifolds and secondly will they work on my application. I believe they were off an...