Search results for query: *

Long time, no post, fabo. I'd like to know if anyone would be interested in purchasing these tips I make, a couple Japanese manufacturers make these and call them "blast pipes", I have access to a bender and mig welder and have made my own set for my dakota, they have a wicked sound and since I...

looking to swap my scamp to a 4 speed, need a-body parts.

factory slap stik, $200 plus shipping from 37128

hey fabo, putting together an 8.75 rear for my scamp, its currently got a 340/904. not sure exactly how tall of a tire i have but i'll upload a pic for a general idea. right now it has a 7.25 with a 2.76 gear, its still pretty fast compared to the average vehicle, but i know a ring and...

looking for a driver. I don't want a crispy clean show car and I don't want a rust bucket or a project. I'm looking for anything that has a slant 6 and a manual transmission. i prefer to drive a stick and I want the simplicity, mpg, and reliability of the leaning tower of power. so if you...

just need a set of fenders for the 63 dart to pass pro/am tech. condition does not matter

some of you probably read my Nissan 340sx pipe dream, but with a TON of help from whitepunkonnitro, the foul, disgusting combination of old school muscle and new school hoonin' is going to become reality. I have to choose a car for the build. a scamp or a 4 door early dart. both are beat on...

came off my 340 when I switched to headers. $40 obo.

factory cast iron 4 barrel manifold. went to a six pack setup and don't need this taking up space. will post cast numbers and pics tomorrow. buyer pays shipping. $80 obo make me an offer.

$60 obo. you pay for shipping if you think they're worth shipping. just your typical kinda rusty, dented-to-fit-in-the-car, road-rash-on-the-bottom, under-the-steering-linkage headers. not much to say about em. kind ugly but they work.

no idea what forum to post this in so I'll start with Mopar Performance. here's the thing, when I was in high school I got my first mopar. a 1974 scamp with a pretty hot 340 for a streetcar. basic hot rod stuff, y'know, real lumpy cam, headers, hi-rise 4 barrel, shift kit, blah blah blah...

heres a link to the thread about my girlfriend and i's first ever rebuild if you care for details: http://www.forabodiesonly.com/mopar/showthread.php?t=289902and heres a little video of it running, in the first clip I'm the one with all the tattoos.

hey FABO! always wanted to do EVERYTHING on a complete motor and I got the chance when I scooped up a '67 273 from a wrecked fish. so here's my progression pics and specs! stock pistons, rods, and heads. hasting rings had to polish the crank quite a bit so clevite oversize bearings were...

does anyone else on this site just love the look of a slammed a-body? don't get me wrong, I'm not one of those slammedenuff guys but I love me a low rider, and believe me, I know the trouble that comes with sittin' pretty, especially when you've got a smallblock with cheap longtubes, so I don't...

there's not really much you can say about a brake pedal assembly, lol. $40 plus shipping, any questions just ask.

drums, brakes, axles there, big bolt pattern, just needs a diff and gears. $150 plus shipping. painted hot rod black

will take $145 for the pair. buyer pays shipping. these were on my scamp for a week then decided to go with ridiculously loud 3" straight-pipes and don't need these anymore. like new condition

okay, I've got a 904 behind a really mild 340. low compression '73 with a little cam and headers. anyways, it's got 7.25 rear with 2.45 gears for now while I finish up my 8.75, and me and some buddies were playin around on the interstate, with this gearing I've found that 40 is the sweet spot to...

I know everyone's got their own opinion on tattoos, but it's not on your body so if you have a negative comment please keep it to yourself. anyways, I went to the shop to get one finished and decided to go ahead and get a few more additions. here's what I left with

not sure if this belongs here or in drivetrain tech, but I'm swapping my 7.25 for a Dana 44 rear end, and the car it came out of was tubbed and the leafs were moved in-board. I need to weld new pads on it because I'm keeping the factory location springs and I need to know how Id find the correct...

I got a BRAND NEW Richmond ring and pinion set, 4.10 ratio for mopar 8.25 rear. I only have one half of the styrofoam packaging they were in but still have original box. these have never been bolted to a carrier or anything. I ended up going with a Dana rear so I don't need these. $200 obo

I've got a '73 340 that is, to the best of my knowledge, stock internals except the cam. it's got an eddy 4 barrel, aluminum intake, and eddy valve covers, but the cam was not installed correctly, and you can't time the motor with a light. I also don't know the specs of the cam, so I've made...

while putting headers on my car I broke my old dizzy cap, so in replacing that I bought a new rotor as well. they are "BWD Select" I believe. drove GREAT for about 3 weeks, then I went out this morning and it just cranked and cranked. pulled plug wires to find no spark. pulled the cap to find a...

IF YOU DONT WANT TO READ THE WHOLE STORY SKIP TO THE BOTTOM. alright, everyone knows electrical issues can cause some pretty strange things to happen, but this is something I've never heard of. okay, so I start the ol' scamp at my lady's house about 1/4 choke cause it's freakin freezing...

at some point in time I'd like to go to a tubular front end, at this point I'm just collecting info and opinions, and from what I've read alterktion is my best bet. Is it really just a "plug n play" kit? just pull the old out and put the new in? I'm running summit headers, stock power steering...

not sure which forum this belongs in so I'll start in small block tech. I use solid motor mounts in my scamp. I searched and searched and could not for the life of me find solid mounts ANYWHERE and I mean N-E-WHERE! so naturally the old man and I drew up some drafts and settled on 3X3 square...

wanna trade my rally's with GREAT tires on them for a set of wheels and tires geared toward racing, y'know pizza cutters up front and fatties out back. Rallyes are flat black with chrom trim rings and all center caps but one. still have screws for it but I blew a U-joint on the interstate and it...

I need some opinions here. I have found two trucks I like equally, and are the same price. first one is a 1974 d-100 single cab stepside with a 225 slant 6 and 3 on the tree manual. cons are torn seat, cracked dash, and needs tires. second is a 1982 d-150(ram) single cab stepside with a...

walked out to my Scamp kind of late New Year's Eve, car is parked in the driveway, I get in, start it up, and talk to my girlfriend while it warms up, then this lifted silverado rolls up and, judging by the smell I'd guess the passengers were Sam Adams, Jim Beam, and Evan Williams, they stop to...

need a set of gears and a sure grip diff for an 8.25 rear. really want between 3.90 and 4.10 but will probably take 3.73's. really anything is better than the 2.45's that are in it now! let me know what you got, really dont want to spend over $200...