Search results for query: *

So we put some magnum heads on an la 318 that we stroked out. With that we decided to adapt the factory kickdown linkage. I'll post some pictures of it in a bit

We bought some heads from performance injection equipment. They are magnum style heads. I'm guessing the stock or magnum style rocker assemblies can be used with them?

I figured I would start another thread for the stroker build for our 78 w200 build. I'd put it over on one of the truck forums but there doesnt seem to be much activity on them. I'll try to keep this thread more about the engine and any issues we run into while building it. Basically we...

My brother has a 78 w200 with a 318. Hes wanting more power. I've talked him into ditching the stock 4027593 heads for some aftermarket cast iron ones. What's everyone running on here for after market cast iron heads? The EQ sound nice. Would they perform good with a stock bottom end and a...

So I found out earlier this week that I only had 3/4 throttle with the pedal to the floor. I bought the bracket to fix that and now have wot. But now my 360 bogs when you floor it. Can't seem to figure it out. The motor is stock with edelbrock air gap intake and a skip white hei distributor...

What are you guys running for a mechanical cooling fan with your magnum? I have the stock 98 ram fan but it is hitting the lower radiator hose.

I am putting a 360 magnum into my 72 scamp. I am running all of the serpentine accessories on this motor. Where are you guys running the heater hose that is under the a/c pump? The port that is that on the edelbrock air gap intake needs to be plugged because there is no clearance. Where do I...

I have a 360 magnum I am putting in my 72 scamp. I have searched about oil pan gaskets and it seems half the people use the one piece gasket with silicone in the corners. The other half trim the gasket off by the timing chain cover and use the la seal. I would rather use the one piece gasket it...

I have a bone stick 72 scamp. I was planning g on putting a magnum 360 I had in it but I found out this winter the cylinders had quite a bit of rust on then. I am going to put my 600 edelbrock carb on the 318 along with my cheap intake. The car already has hooker headers and 2 1/2" dual...

I have for sale my 1972 Dodge Dart Swinger. It has the 318 in with an Edelbrock 4 barrel intake and 600 cfm carb. The transmission is an automatic and shifts great. I replaced the front drum brakes with the Scarebird disc brake conversion kit. The lines were replaced from the master cylinder to...

I trashed my wheel hub while removing the studs. So I need to find a replacement for it. Parts stores don't carry them. So do I need to start going through junk yards to find one or do I have another option.

I have a 1972 dodge dart swinger with drum brakes all the way around. I am replacing all on the brake lines with new. I can not find The fittings for the brake line that goes from the wheel cylinder to the rubber line as seen in the picture. Any help would be appreciated in finding out what this...

I got a stumper here for you guys. I have a brake fitting that came off of my front wheel cylinders. I can not find a replacement in the parts stores for it. It appears to be a bubble flare fitting and the threads are metric. The problem I am having with it is that the nut portion of it is...