Search results for query: *

who makes rear disc conversions for 8.25? I just purchased a housing. gotta get axles, and gear. this for the the 65 barracuda. the housing will fit right in, without any mods. just have to build it. the car has the 7.25, but its starting to go. I have looked on summit, and jegs, but all their...

recently purchased a brake booster/ master cylinder set up. at this point before I install, would it be a good idea to buy a 10 and 2 pound residual valve to add to this set up? I have already installed disc brakes on the front. here is what im looking at on ebay. thanks...

since I bought this conversion kit for my 65 barracuda. If I ever need replacement parts, I am assuming it will be for 73-76 abodies. Am I correct on this? thanks.

i cant seem to get a good seal on my 318. i have a chrome water neck housing, with a 180 degree thermostat.mounting to an edelbrock intake. i have tried hi temp, silicone, used up all my spare gaskets. am i missing something here? all surfaces seem to be flat.

have a near complete car , that is going to be parted out let me know what you need has v8 with pushbutton transmiision

winter months are here, hooking up the electric choke on the 390 holley. was wondering where 65 barracuda owners are finding a 12 volt source when the key is on. thanks.

looking for a Holley carburetor for rebuild. reasonable.

is there anything I need to do to the stock ammeter on thee 65 Barracuda after I done the v8 coversion?65 im still using the slant 6 alternator. Everything works fine, but I have heard stories that my car may catch on fire, if I don't make some adjustment. not sure what they are talking about...

So, I guess chat is pretty much dead. I pop in there every other day, and its a ghost town. PoisonDart did hang out there pretty regular, until he got a job. oh well.

what is everyone using for a catch can on early a bodies?

my 318 sounds good when I fire it up. but after it warms up, it develops a miss. I have one of those dizzys, that eliminates a lot of the exterior ignition parts, all I have is the coil. here is a link to what I bought.Small Block Mopar Dodge Chrysler 318 340 360 Complete Electronic Distributor...

is the rearend width different in these 2 cars? like mid 70s cars.

So I went down to get exhaust , and the guy said the manifolds i have would not work, because they didn't drop out the back,instead the passenger side drops in the center, and the driver side doesn't angle out the back correctly. What year made these that would work with what I have. its a 65...

I measured my rear wheel from center to the edge. 11 1/2 inches. what size speedo gear do I need. thanks

my 904 is shifting out too early. could it be the rearend ratio is 2.76? is there any adjustment that can be made to make it shift later?

my 65 freshly built 318 with 904 idles well, and has great response in park, but once I put it into gear, it seems weak as soon as it shifts, then very little power afterwards. acts like its shifting too fast. has a holley 390 four barrel. Im thinking the kickdown may need to have a spring at...

I saw this car on a movie a good while back. its a charger, but the grill seems to be from a 70 Superbee, and somewhat further modified? http://2.bp.blogspot.com/-cc7KNvUNFuQ/TppnKrOMBgI/AAAAAAAACJk/mKvXqE3AAac/s1600/wt-car11.jpg...

its not getting hot, has a new champion radiator in it. 190 themostat. but the top radiator is so like its gonna pop when its running.

Just got screwed on a cable set up for the 65. I ordered a conversion kit, they told me about 4 weeks to build and ship for $195. Well, after 5 weeks, I sent them an email asking the status of my order. They said the shipment was going out that week.. So another 2 weeks go by. Sent another...

Hello, after nearly completing the conversion, I have a lot of extra parts that some may can use. all prices does not include shipping. I may have other parts that's not listed., so just ask. 1.225 crankshaft. $25.00 2. 65 barracuda oil pan, pick up, and dipstick. slant 6. $65.00 3.225 head...

Im looking for a radiator to cool my 318/904 65 barracuda. but everything that I am seeing has the lower hose coming from the driver side, my lower hose comes out on the passenger side. did Chrysler make another water pump where the neck came out at the driver side?

what are you guys running for a safety switch, when you converted to v8? I have the 904 with the 3 prong.

I need a crossmemeber for my 65 barracuda, that has already been modified for dual exhaust. I know at one time someone was selling them , but I cant find his post. Thanks.

so, I noticed my leaf springs are sagging on the driver side of the 65. where is a good place to buy new ones? thanks.

Got the 65 barracuda running, but I don't think the slant 6 radiator is gonna keep it cool. the engine is a 318, .030 over. mild cam. four barrel. without a thermostat its running at 190 idling. 904 transmission. I don't know if I can maintain this running a thermostat, and driving in town at...

Bit the bullet and bought a cable from Imperial Services. They take 3-4 weeks to deliver.<because they build to order. They have an 800 number to call, in case I want it faster. Has anyone done any business with this company?

Just got these tires mounted.

Hello, well I got my alternator brackets on with new alternator, now my belts are a bit off. the pump seems to be a little far forward. did mopar make different lengths water pumps. I have a single groove pulley. do I need the double groove, or a deeper single groove? not sure what to do here.

http://www.ebay.com/itm/321118209192?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 I want to put this in my 65 barracuda. I have a mock up cap, it looks like I will have to bend the kickdown bracket slightly, and move some wiring on the firewall.

So, I got my new alt brackets in, but I cant figure out how they mount. its like they need a ton of spacers to bring it out to line up the belts. I would like to see some pictures, to get an idea. Thanks.