Search results for query: *

67 Barracuda grille and headlight bezels. The surrounds have some rash and dents but the rest is in pretty good shape. The LH egg crate is very straight, the RH has a few areas that need minor straightening. All mounting studs are present. I have tried to show the true condition of these...

Bench seat with seat belts. The seat back doesn't fold so I assume it's for a 4-door. Seat belts have a 1968 date tag. The frame and padding are in good shape and the upholstery only has a few small holes on the seat back. I hate to see it go to scrap if someone on FABO has a use for it...

Good 7 1/4 rear end from a 72 Duster with 3.23 open diff. Complete from drum to drum. I also have free springs and skinny SBP steel wheels if you want them. I hate to see this stuff go to scrap, so hopefully someone has a use for it. Price: FREE Location: 85142 Pick up only.

Hi all, I have a new project in the garage and I'm looking for some expert opinions on what I should do. Car details: '72 Duster with 340 swap, 727 w/Jegs 3000 stall converter, and 8 3/4 with 3.91 sure grip. It's intended to be a fun street car, not daily driven. Full interior and A/C...

Coming back to FABO after about 3 years. I used to be on this site every day during my '67 Notch build, but family priorities have been getting in the way. I recently came across 2 (yes 2!) new A-body projects and I will certainly be cruising FABO again to track down parts and get advice...

Hi all, Merry Christmas. I'm trying to iron out some brake issues on my '67. -Rear tires lock up before the fronts -Brake warning lamp comes on when I hit the brakes Here's what I have (nothing is original): Manual brakes 15/16" master cylinder (new from Autozone, intended for a...

Full set of PLYMOUTH letters taken off my '67 Barracuda. Great shape overall. Plating is peeling on the "P" but hard to notice. "M" and "H" have a stud broken off, but there's enough stud remaining to push through the hole in the header panel. Mounting nuts included. $55 with free shipping...

Pair of splash shields. These rivet to the frame rails ahead of the K-member. Good shape and much cheaper than buying new ones. $25 free shipping. Located in the Phoenix area 85249. Thanks! Scott

Front seat belts from my '67. Good condition, could use some cleaning. One of the plastic housings is split as shown in the pic. $25 free shipping. Located in the Phoenix area 85249. Thanks! Scott

Used vent window weatherstrip from my 67 Barracuda. They are in great shape and still very soft and flexible. I bought new ones from Steele for my restoration (over $100!)... I should have just reused these. $35 for the pair, free shipping. Located in Phoenix area, 85249. Thanks, Scott

Used parts from my '67 Barracuda: -1 set of door weatherstrip end caps -1 set of lock pillar caps All are in good condition, a couple have some primer overspray on them. I bought replacements for my restoration and didn't realize these were in such good shape. Steele Rubber Co sells new...

I have 2 front or rear bumpers for 67-69 Barracudas. Both have small dents and one is bent slightly, but they would make good cores. $50 for the pair. Located in the Phoenix area 85249. I'd like to sell locally but I'm open to talk about shipping... Thanks! Scott

1967 Barracuda hood, very straight with no filler or rust. Includes the inserts which are in good shape. There is a crack at one of the hinge mounting points that needs to be welded up as shown in the photo. $125 obo. Located in the Phoenix area 85249. I'd like to sell locally. Thanks...

1967 Barracuda grilles and surrounds in good shape. There are some dents as shown in the photos, but they're restorable for someone who knows what they're doing. I have tried to show everything in the pics, but let me know if you need more. All mounting studs are there (some spin when you...

New spool motor mounts for a 360. Nothing special, just extra parts from my build. Part #s are 2325 and 2326. $20 + shipping from the Phoenix area 85297. Thanks, Scott

New 17 foot roll of Metro Supersoft trunk weatherstrip. $17 includes shipping to the 48 states. Located in the Phoenix area 85297. Thanks, Scott

New small block aluminum valve covers in good shape. There are a few scuffs on them from shipping but can be polished out. Comes with hardware. These are spares from my build and I'll probably never use them - help me clean out my garage. $80 includes shipping to the 48 states. Located in...

Flowmaster Delta 50 SUV mufflers with 3" center inlet and outlet. Part # is 53055. Basically new - run for about 30 minutes and then taken off because of fitment issues. The Delta 50s have a nice deep tone without the annoying drone that most Flowmasters have. May be a little hard to fit...

Clean brake pedal assembly in good shape. I believe it's off a '67 Barracuda. $15 + shipping from 85297. Help me clean out my garage... Thanks, Scott

I have a new windshield gasket for a 68-76 A-body, Precision part number WCR-D690. It requires a black lock strip (MA9808 from Classic Industries for 10 bucks). $70 with free shipping to the 48 states. Located in Phoenix area 85297. Thanks! Scott

22" 2-row radiator out of a '67 Barracuda 273 4-speed, no A/C. Part number is 2785975. Has a few dings but it's in good shape for a driver. The lower tank has signs of seeping at some point in its life (see 2nd photo), but it didn't leak when I used it. $75 includes shipping from Phoenix...

Hi, Did the 68-69 Barracuda windshield gaskets require a black lockstrip? I'm confused, I thought the 68-69 didn't require a lockstrip at all. I have purchased two gaskets from two different vendors, supposedly for a '69, and they both require a lockstrip. If anyone knows that a...

Just wanted to share this info for those using the original Magnum serpentine setup on their cars... As you probably know, the stock Magnum truck PS pump sticks out a mile and hits the battery tray. I have heard about using the PS bracket from a van that brings the pump closer to the...

Hi, I'm looking for a 5.2/5.9 magnum power steering pump bracket from a Ram Van serpentine setup (it's different from the Ram pickup bracket). I'll also take the pump if you have it. The bracket looks like this: Thanks! Scott

Just wanted to give Brian @ IMM a well-deserved "thanks" for doing a great job on my Magnum stroker. He's easy to deal with, offers tons of advice, and obviously knows his stuff! I picked up the motor last week and can't wait to get it in my cuda. Approx 485hp and 510lb with a 750 carb...

My pedal linkage doesn't seem to be right... It's basically a heim joint connected at the pedal, and an adjustable turnbuckle that connects to the clutch master cylinder. But I can't adjust the pedal height. The problem is that both ends of the turnbuckle are right-hand thread. Turnbuckles...

Hi, I'm selling a BBP brake setup that I no longer need for my build. All parts are from a '74 Scamp: - Disc brake spindles (blasted) - Caliper brackets 10.87" (blasted) - Calipers and hardware (blasted) - Dust shields (blasted) - Lower ball joints (need cleaned and new dust boots...

I'm looking for what I think is called the "return hose nozzle". It bolts to the front of the power steering control valve. See pics. My new steering gear doesn't have it, and the box I have laying around is broken. So I don't know what a good part actually looks like. This is for a 73-76...

'67 A-body pitman arm off of a power steering box. Joint is tight and rubber grommet is in good shape. $30 includes shipping to 48 states. Located in Phoenix area. Thanks! Scott

Super clean Magnum valve covers from a 2001 5.9. Gaskets included (used but still in good shape). $35 includes shipping to 48 states. Located in Phoenix area. Thanks! Scott