Search results for query: *

www.wheelvintiques.com/OfficialSite‎ They can help you.

Check the Bulk Head connections and wiring while the engine is out. I didn't do that and am sorry for it now.

Try Rock Auto.

Makes perfect sense.

the weather up here has been wet so I haven't run into my buddy at Cruise night. I'll let you know as soon as i see him.

will this work on a 67 Dart?

I put a bolt in the original hole and cut the head off and welded it. Drilled and tapped a new hole in the proper location to fit the line. I was able to reshape the short line (to wheel cylinder) to reach the block. Problem solved

Exhaust leak will cause this as well.

About the same condition that mine are in. If you ever looked at the price of NOS you will realize these are a steal.

I have that same Sony unit in my Valiant minus the amp but it works very well without it. I connect my phone and listen to Pandora.

Payment sent.

I'll Take it, PM your Paypal info.

The 440 source flywheel comes with weight attached for the externally balanced engines. you just remove the weight (2 screws) and your good to go.

Try 440 Source, that's where I found mine. Flexplates & Flywheels-440 Source

Have had the same thing happen...with the car running wiggle the bulkhead connector and see if it will die.

Possibly a bad connection at the Bulkhead connector. Same thing has happened to me several times, give the the connector a wiggle and it has power again.

I had a simular problem and found connections at the starter relay were loose and also check the ground connections at the battery and engine block.

Saturday September 3rd 2016 In 2015 they had over 700 cars. Elm St Downtown Manchester NH Cruising Downtown Manchester

I ran mine through the firewall and tapped into the wire from the reverse light switch on the transmission.

Just installed the P4120863-64 on my Valiant last night. Corrected body roll and wheel hop and ride. Right side is only 3/4" higher than the left. For the money, I think I will be very happy with these springs.

I would offer 2K and see were it goes from there.

How can you have 15" tires on 14" wheels?

Very Nice Ride.

Miles on the car?

I installed KH disc brakes with 14" oem sbp steel wheels on my Valiant. The fit is close but not a problem so 15' should have plenty of clearance.

And I thought $45 was steep, check this out.https://www.amazon.com/dp/B01F94L0MS/?tag=joeychgo-20

I have a Hurst T Handle but was thinking of switching to a Ball. I can't believe the price of a Hurst white 4 speed ball. $45 is crazy. Anyone know of a less expensive source for one?

Not mine but thought there might be some interest. Price is right 67 Barracuda project

The seats will clean up nice. Great for a driver.

I picked these up on CL but I decided to keep the Bench seat in my Valiant. The seats are in very good condition. Two small tears as shown in pics. The guy I bought them from had therm in a 68 Dart GT. After some research, I believe they are originally from a 78 Dodge Magnum. I'm asking $375 and...