Search results for query: *

We need the hinge(s) for the rear seat of a '68 Barracuda. This is the part that fits onto the body, not the chrome piece, which is the part that fits the seat itself. Thanks in advance!

Does anyone know what the initial timing should be on a 6.1 carbureted Gen III with MSD ignition? I don't know whether to time it around 20 degrees or go to the upper 20s. It has a small Comp Cam street cam. On initial startup of about 15-20 seconds running time, the engine was idling around...

What is the largest 15" wheels, tires and backspacing that will fit on my '68 Fastback with all stock suspension without any tire rub anywhere? Thanks in advance for any help and info!

Remanufactured A1 Cardone Front Passenger Side Disc Brake Caliper. Part # 18-4407. Fits early model Mopars with Kelsey Hayes original calipers. Never put on car. $65 plus shipping from KY.

Remanufactured A1 Cardone Front Passenger Side Disc Brake Caliper. To fit early model Mopars with Kelsey Hayes original calipers. $70 plus shipping from KY.

I have a '68 with variable speed wipers. It has 4 wires coming out: Red, Light Blue, Brown and Light Green. Can anyone tell me what these 4 wires connect to? Thanks for any help you can give!

This is a left and right rear side chrome window trim. No dents, slight impression on one that won't really show up in a pic. Good condition. This is original '68 chrome. $60/pair plus shipping.

Remanufactured A1 Cardone Front Passenger Side Disc Brake Caliper. To fit early model Mopars with Kelsey Hayes original calipers. $80 plus shipping.

I have seen YouTube videos on how to wire a voltage regulator on a Gen III alternator. I am using a Hemi 6 control box and running a carburetor. I do not have a computer on the car. Does anyone have a wiring diagram and voltage regulator suggestions on what you do differently when you do not...

These are for a ‘68 Barracuda Fastback. Bought a complete set of catswhiskers, but only needed 3 of the outside whiskers. Selling the complete inside set (4) and 1 of the outside right door. $40, plus shipping.

Remanufactured A1 Cardone Front Passenger Side Disc Brake Caliper. To fit early model Mopars with Kelsey Hayes original calipers. $80 plus shipping.

I'm posting pics of a remanufactured A1 Cardone #18-4406, which is supposed to be for a driver's side front. I'm also posting a pic of the caliper that was taken off the car's driver side front. They do not match. I'd appreciate any help in figuring out why they aren't the same. Thanks in...

This is a left and right rear side chrome window trim. No dents, good condition. This is original '68 chrome. $65/pair plus shipping.

I have 2 nice pieces of door trim with no pitting, dents, or dings. Also, 1 piece of left side drip rail. I don't know what these pieces are worth, so if anyone is interested, you can make an offer. Thanks!

Used front windshield chrome trim. The bottom piece has a cut/crease in it, as you can see in a closeup pic. The other pieces are in almost new condition. $80, plus shipping.

Does anyone have, or know where I could buy, a manual master cylinder brake rod for my '68 Barracuda? We are converting from a power brake system to manual brakes. Thanks!

Does anyone know where I can get a brake master cylinder rod for my '68 Barracuda to convert it from power brakes to manual brakes? Thanks!

11 New 7/8" Rear Leaf Spring Bushings. Extra bushings left over from purchase while I was restoring '68 Barracuda. $12, plus shipping for all.

I have the chrome trim for a 1968 Barracuda front windshield . The top piece and 2 side pieces are in good shape. The bottom piece is bad with a crease in it. I would sell my trim for $150 plus shipping or be interested in buy a bottom piece from someone else, if they have one in good shape.

I need to install an a/c compressor on a 6.1 in a '68 Barracuda. It has a stock K-Frame and Schumacher engine mounts. The a/c compressor on a 6.1 hits the engine mounts. Also, on a 5.7 timing cover truck swap, the a/c compressor and alternator hit the hood when you try to close it. Does...

Will a 6 Hemi Ignition Controller work with a 2010 6.1L Hemi from an SRT8? Or could it be made to work? I've seen where they work with an earlier model, but haven't been able to verify if they work with the later models. Thanks in advance for any help.

What do the letters ATM mean, concerning a brand of carbureted intake? Thanks for the info!

I bought a '68 Cuda and need help from anyone with experience in installing a 6.1. I'm on a budget, so I'm having to spend sparingly. I'm going to use the stock exhaust manifolds, instead of headers, due to cost. I need to know if the steering column, with power steering, will clear the stock...

I've got the instrument cluster (really, it's the silver panel that runs between the 2 pads on the dash) pulled out about 1/2" at the bottom, all the screws are out and the speedometer cable is disconnected, but I can't seem to get it to come out any farther? Are there any other bolts or screws...

Chrysler Hemi Engine. 1955 331/354 cubic inch engine, depending on pistons installed. It comes minus the stock pistons and some of the valves. It has been disassembled and the crank, rods, heads and block have been cleaned and magnafluxed since the pictures were taken. It has the most...

Can anyone tell me what changes have to be made to the drivetrain and the engine bay in order to put a '57 392 Hemi in a '68 Fastback Barracuda? Thanks!

I'm wanting to find out what year of 5.7, 6.1 or 6.3 has the least amount of 'new style' innovations on them, i.e. Variable Valve Timing, MDS - Variable Displacement Technology, VCT - Variable Cam Timing, or anything else not on a 1960s engine. Any info would be greatly appreciated! Thanks!

I've found a '65 Barracuda, which my wife has fallen in love with. I've always wanted to put a Hemi in the car that I buy (boyhood dreams never die, right?). I don't know how easy it would be to switch the slant 6 out and put my Hemi in its place...or if it is even possible? Thanks for any help...