Search results for query: *

This is probably a stupid question but I wanna know when a Mopar is considered "level". Can I just go off the rocker? IE; if it is level on the rockers then is the car is considered level? Again; Seems like a stupid question but I'm doing a home front end alignment in less than perfect...

So I was putting my front end back together after replacing all the bushings and steering box.... other than the typical spinning LCA pins with the poly bushings it all went back together pretty okay.... except the passenger side control arm is pushed back on the pin. Driver side is okily...

So I ordered a Cardone 276542 off RockAuto, supposedly supposed to fit a ‘74 along with a ton of other Mopar vehicles. It does NOT look like any Mopar box I've ever seen. I was wondering if anyone else has seen this style box? I'm worried if it even fits an A-body! Any Mopar people have...

Dudes!!! I’m wanting to install my fancy sport mirrors on this heap, have everything removed/UNclipped except this thing. Before I go and mutilate things does anyone know how these covers/clips come off?

I have these two factory-looking brackets on the Dart located on the hump under the plastic AC manifold. The PO screwed a tach into one of them. What are these for? There's no other brackets or hole for a floor shifter.

First off: It's a new windshield with a new gasket We just got our first rain here in KOMMIEFORNIA and el neuvo Darto had a puddle on the driver's side. I suspect the vindow scheel and not wiper seals because its moist on the top front edge of the dash in addition to the wet floor I vaguely...

So I know the purists hate it unless the car passed through Madison Heights but I'm interested in seeing pictures of radiused rear wheel wells on Dodge Darts, anything of the '67-'76 body style. If you're just gonna post that you don't like it pass this thread over. I'm looking for pictures...

Stupid old cars! So the idler was trashed on my Dart I just bought so I figured now would be a great time to upgrade to the fast ratio arms. I got the new idler installed and fitted, had to clearance the exhaust pipe a bit but no biggie with a few swift whacks with the 5 lb Motivator. Try...

I searched a few different ways and was surprised I couldn't find anything about them... The idler arm and power steering seal needs replacing on the Special Sauce Dart and was considering these arms. Who's used them? Any feedback?

I had been looking for a Duster but my buddy Kyle (who's a member on here I believe) was selling his Dart so I bought it from him. 1974 Dodge Dart SE Swapped the wheels from my old Valiant onto it and the front suspension needs to be rebuilt but parts are already on their way. Upgrading the...

Like the title states, were all 8 1/4" rears large bolt pattern?

Sooooo..... I found a promising looking Duster online, slant six auto, seemed like a good start for me. Check the car out, there's some random funkiness about the car and things I see wrong but easy to fix but I'm not there to fix it, that's something I'd do after I own it. We go for a test...

It's been years since I've been here, I got into hot rods. Saw a bad *** Duster in a parking lot and now I've got the bug again. Looking for a project Duster, maybe a Dart Sport. Looking for a project not a done car, so a little funk is acceptable. Prefer running/driving/titled car. Have...

Complete changeover from driving car Link: http://stockton.craigslist.org/pts/5503420804.html Also have a slant six four speed bell housing, flywheel, pressure plate, disc Also also have a big block scattershield flywheel, pressure plate, disc

Hey guys, considering selling my 1967 Valiant because once again I collected too much crap (up to five vintage cars!) and this one is currently pretty low on the "build" list. Problem being... I'm not sure what it's worth. I bought it from from FABO member "67Signet" and fixed it up with...

Slant six three speed tranny, bellhousing, flywheel, clutch disc, pressure plate, arm, and some other random parts. $120 for all Also have four speed pedals for a 1967-1976 A-body $150 obo Pick up in Tracy CA 95376

Set of four 14x7 Ansen mags three in nice shape one looks like it was driven on a flat for a bit - little chewed up but still hold air fine - if you spend some time on it you could make it nice as the others pretty easy all are balanced and run nice to 80 MPH - as fast as I've driven...

3.23 geared small bolt pattern 7.25 a-body rearend drives excellently with no whine was told by 67Signet that it has new brakes but haven't checked $150 Pick up in Tracy CA 95376

A member here has a stock "two prong" gas cap from a Duster, will this work on my Valiant? What's the year interchange on the gas caps?

I had set my Valiant coupe was set up to be my daily driver, with big disc brakes, upgraded suspension, blah blah blah... Going to work on Tuesday morning in the fast lane people panic stopped in front of me. No problem slowing down for them, but the Valiant kind of slid to the right, not...

Not my show, but I'm thinking about attending! Anyone else on here gonna go? http://sfbay.craigslist.org/pen/pts/2592930560.html Cali Bay Area Slant Six Show!! 9/25/11

I bet you were thinking boobs! That's what I was thinking just after I typed it! :downtown: Anywho, looking for a pair of these with an inch of floorpan section around them from your parts car. Whachu got Willis? :D

Wanted: Rear Seat for 1967 Plymouth Valiant Coupe I don't know if 1967-1976 are the same. I don't know if four door sedans are the same. I don't know if Dodge Darts are the same. I believe the Duster/Demon/Dart Sport seats are different height. I'm hoping for something somewhat...

1973-76 Mopar Bucket Seats with 67-74 A-body tracks Yucky green velour. Wear holes were the seat belts rubbed. Need recovering. $160 firm Pick up in Tracy CA

I can't find it, but somewhere online is an article where they make a FM or J body rear swaybar fit an A-body. Anyone got a link? If I remember correctly they had to heat and bend it a bit to bring each end in like a 1/2" or 1". Thanks!! :D

Trade: 73-76 highback buckets for 69 and earlier lowback buckets I have 73-76 highbacks in my '67 Valiant, I'm wanting lowback buckets. I'm not a numbers matching "one year only" resto type guy, any '69 and earlier lowbacks would work for me. Anyone?

First off, I'd like to say I've never rebuilt an automatic tranny before. I call them Voodoo Juiceboxes and usually swap in a stick shift. However, I've been told the 727s are one of the easier trannys to rebuild, so I'm thinking about giving this a whirl, with a bit of a twist. I have a...

What makes a Hurst Competition Plus shifter better than a normal Hurst shifter? I'm combining two shifters into one and I need to know what parts are different between the two. What are the actual internal parts that are different? It's got to be more than just the external adjusters, but...

I have a pair of 1973-1976 high back bucket seats, recovered in the 70's in black and light green crushed velvet. Worn through velvet where the shoulder seat belts rub. Not bad shape but will need covers. Looking to trade for 1967-1969 low back buckets in similar shape. I'm keeping the...

A 1967-1969 Plymouth Valiant? Seems like the 1970 version might not look too out of place, but who knows. I figured you guys would be the ones to ask!