Search results for query: *

WANTED: Smallblock cylinder head to block dowel pins shipped to zip 48036 Michigan! Seems everything available is 1/4inch where clearly these are larger, maybe 3/8 or even 7/16. Any help would be appreciated!

Looking for a 71-72 Duster Twister. Open to anything that’s available but no trailer queens please!

Looking for 2 preferably, or 4 original paint B5 blue small bolt 14x5.5 wheels for my duster. I understand they prolly won’t be pretty but nor is the car they are for. 1969 or 1970 only, B5 changed in ‘71. Let me know!!! Thankyou!

890 891 892 torsion bars. Came in a large parts lot I purchased. Lil dirty, lil greasey….. $50.00 each shipped. PAYPAL(f&f) -or- ZELLE, or cmon by! Located in Clinton Twp Michigan 48036

I have a complete ‘68 Formula S 340/4sp and the body is just too far gone for me. I’d like to find a roller that I can drop the motor and trans in, what’s available out there?? Thanks

Not even sure it’s possible but does anybody make stamped steel 1.6 rocker arms for small Mopars??…..or something that’s “bolt in as stock” and go?? Ductil maybe?? Thanks in advance

Hello all engine builders, could you please enlighten me on why every valve guide has this machined notch into it? Same place, all 16 guide tops. 1969 X heads. Thankyou in advance!

MP #P4529269 Smallblock 308 bare heads. 1.88int/1.60ex. I purchased these heads knowing they needed to be blasted from my engine shop due to rust from sitting on the floor in a wet basement. They were in MOPAR PERFORMANCE boxes, but half of them stuck to the basement floor. They were blasted to...

1968 BARRACUDA ROCKER MOLDING GILLS————gills only, no spears. These were unfortunately laying in a barracuda I purchased under a bunch of other goodies….hence the crack! Not correct for my car so I’ll pass them on to somebody who could use them. Depending on your restoration, it’s a clean break...

Full set of A-B-E bucket seat cast hinge covers. Good shape but ready for a strip and repaint. One button is still attached, and the other will need the quick 2 screw repair. See pics. $300. Plus $18.25 shipping in lower USA

Hello all. I’m sure many know, just not me! Will a Super Victor intake w/ Holley carb fit under a stock flat 1970 340 Duster hood with ZERO modifications?? My second option is the Victor340, looking for racing purposes so the SuperVic should best suite the purpose. Thankyou in advance.

Looking for 2 or 4 original paint B5 blue small bolt 14x5.5 wheels for my duster. I understand they prolly won’t be pretty but nor is the car they are for. 1969 or 1970 only, B5 changed in ‘71. Let me know!!! Thankyou!

Hello, picked up my 340 block from the machine shop and he gave me the cam plug to install(they forgot to!….scary, I know!). He gave me a 1-13/16 concave disc type expansion plug, and it just seems to damn small! All the freeze plug type call for 1-7/8 but that is a diff type plug, but I feel...

Ok, so my mind is baffled. I installed a cam at +4degrees per the timing recommendations, and my FBO limiter plate people suggest I set my timing at 18 degrees initial. Soooo so I set it at 14….18…..or 22 degrees initial?? Been a minute since I messed w this stuff and prior to, all my cams were...

Hello, I have some MOPAR PERFORMANCE NOS bare cylinder heads, part # P4529268 in the boxes…..Rusty from sitting but any idea what there for?? Google search has ZERO information on these! Thanks in advance!

Weighing out my options on running a .508/108* cam I’ve had for some time. I might have the right combo to use the cam for its intentions…..top end. High compression/tall rear gear/3800stahl converter. My question is lifters? Any suggestions? Some old RHODES or MP? Does Hughes offer a decent...

1967 1968 1969 BARRACUDA SHELL/ ROLLER!!! Hello….looking to see if there’s any rustfree(or close to!) shells available out there?? Fastback Preferred but wouldn’t mind a notchback either! Manual trans would be best, but again open to what you might have, and location….I’m in SE Michigan myself...

$13,500……1970 Duster 340/727/3.55suregrip. Data tag and 2 buildsheets for documentation. Column shift bench seat w/armrest. This car sat many years due to a blown head gasket near the east coast. The ORIGINAL NUMBERS ENGINE AND TRANS ARE OUT OF THE CAR, in its place is a stock 1972 340/727. The...

1970 Duster 340/727/3.55suregrip. Data tag and 2 buildsheets for documentation. Column shift bench seat w/armrest. This car sat many years due to a blown head gasket near the east coast. The ORIGINAL NUMBERS ENGINE AND TRANS ARE OUT OF THE CAR, in its place is a stock 1972 340/727. The orig...

Hello fabo members, I have a question. What would happen if I just looped the power steering hose on the steering box?? I’m getting close to firing up my car and would love to take it for a spin, but I don’t have the correct PS Brackets yet, so could I just loop the hose from the inlet to the...

Hello MOPAR enthusiasts, I am on the fence about installing the HOLLEY SNIPER FI kit that I purchased. What has me concerned is how many modern FI KITS are for sale….used with “ only 100 miles”……”used for one week!”……”like new, changed direction!” I have everything I need laying in front of me...

Help me Out guys! I’ve searched high and low for the torque specs on a 1973 340 spool mount K frame and can’t come up with anything! All my books and manuals are pre-72 it seems and I’m having a rough time online with the Google search! If somebody has this info and would be kind enough to pass...

$7200. obo.....1969 383 AUTO BARRACUDA FORMULA-S roller. I bought this car with big intentions and then had covid in April, plans have changed....too many projects and not enough time or $$$! No Motor but have 727 non matching trans that goes with. Before you ask, no manifolds, engine mounts or...

Must be original paint please! In need of a 1970 B5 BLUE DUSTER FUEL CAP. Not a show car but it is original paint, all faded and not the prettiest but I do want the gas cap to somewhat match! Let’s just say mine was lost somehow!! Similar condition to the pic would be great! Thankyou, any leads...

Hello, I have a set of the sb 360 roller heads that everybody wanted about 10 years ago, are they still a hot item?? What can I get for them in today’s world? Looking to sell possibly. They are from a 1989-91 LA roller 360. Thanks in advance!

1971 Plymouth DUSTER TWISTER A51 EV2 ROLLER SOLID MOPAR PROJECT TWISTER PACKAGE | eBay

In need of a LAKEWOOD SMALLBLOCK BLOCK PLATE FOR BELLHOUSING PN 15320. Thankyou in advance!

Hello all. For quite awhile I’ve saw a link/forum on here for auto transport.....no?? What happened to it?? I’m considering buying a car from Nevada and might need it shipped to SE Michigan! Anybody know anyone with good rates?? It’s a non-runner, just an FYI! Thankyou fabo!

Hello fabo people and HappyNewYear!!! I’m building a 69 340 Dart and I have these old school M/T valvecovers that I’m going to use. They have never been drilled for a PCV or a Breather. Does it matter which side I put the PCV Valve on, both side are Positive pressure....correct?? Thanks in advance!

....or within a couple hours?? Need to get my 4 speed for my Swinger rebuilt before I put it in. It’s a good trans but I’d like it bead blasted and looking new prior to install, plus all the seals and syncros checked out as well. Let me know.....Thankyou in advance! -ps....I’m in Clinton...