Search results for query: *

I'm repainting the dash on my 65' Valant 4 door and would like to get it as close to original as possible. Are there any Mopar paint experts out there that might know which color code my dash/doors are? I swear the longer I look at it the more they all look the same... I'm trying to paint Via...

I have a 1965 Valiant w/ slant 6. Does anyone have a 64-65' A833 flange style they are willing to part with?

Hey ya'll, I have a 65' Valiant 4 door with bench seats & 225 Slant 6 (original motor). I found a good deal on a A833 with bellhousing and all. The problem is it is out of a 1980 D100 w/ slant 6. I found a lot of info but still curious on a few things, - I will have to turn down the input shaft...

Throttle Rod And Kick Down for A904 with 60-66 slant 6 1 bbl Carter. $40 Plus Shipping or Free Local Pick-up (Chico, Ca)

13x4.5 Stock Mopar Wheels off a 65' Plymouth Valiant Small lug pattern 5x4. 155/80R13 tires in fair shape. $150 Local Pick-up Only (Chico, CA)

14x5.5 Mopar Rallye Wheels. Small lug pattern 5x4. Trim rings in fair shape. 205/60R14 tires in good shape. $450 Local Pick-up Only (Chico, Ca)

Vintage E-T IV aluminum slotted mag wheels off a Duster. These are unilugs and need the lug washers (I have a few) but the lug patters is a 5x4.5. These can polish out very well if someone took the time. Needs new tires. Front: 14” x 6.75”, 235/60R14 Rear: 14” x 7”, 245/60R14 $150 Pick-up...

A TF6 Torque Converter for 62'-67' A904 and Slant 6. It is in fine shape, no grooves on the input shaft. - Non Lock Up - Medium Stall - 18 Spline - 122 Tooth Gear - Diameter 11" - Bolt Hole Diameter 10" - 4-Pad , Offset - Pilot 1.550" $200 plus shipping or free pick-up (Located in...

Looking for an A904 kickdown linkage for the 225 super six setup. If you have it, I'm also looking for the pedal and throttle cable assembly. Thanks, Travis G.

Hey guys, hopefully this is an easy one! I have a A904-G out of my 65 valiant that didn't come with a dipstick. Was at pick n pull and found a dart with an a904 so I took it's (what looked like stock) dipstick and through it in mine. But the problem im seeing is that the min/max mark is about 3...

Looking for a set of Mopar 7.25 ring and pinion gears, gear ratio wanted is the 2.93. Let me know if you have a set, not looking to spend too much. I'm based outta Chico, Ca just so you know. Thank you, Travis G

So I don't know whats going on anymore. 65' Valiant with 225 Slant 6 ran great three days ago with points in it, would take half a crank to fire up. Now I got a 5 pin blue box ECU (By HiRev7500) with accompanied two wire distributor. Installed it, and I have an impossible time firing it up when...

Hey guys, rebuilding the 7.25 rear end out of my 65' Valiant. I've gotten the whole thing apart except for the pinion shaft. So far on the shaft I have removed the 1-1/8" nut, washer, flange, and seal. In my service manual it says, that there should be a pinion shaft lock pin. Now I have cleaned...

Ya, this is gonna be an easy one, but for the life of me I can't get this nut off. I've been at this for two days now and going out of my mind. Is this thing reverse threaded? It doesn't look like it is too me. How are you guys getting this main nuts off these things?

Hey guys, Just finishing rebuilding my A-904-G (my first rebuild) and put it back in my 65' Valiant this evening. Filled it up with fluids and went to fire it up. First thing I found was that it wouldn't crank over in park, so I put it in neutral and it fired up. As it was warming up in neutral...

Hey guys, I had bought a Rev 7500 electronic ignition (whole distributor unit and ecu) for my 225 slant 6 about a month ago but shelfed it for a while. When I was looking at it, it seems to have some side to side shaft wobble. Now this is on the bench and not in the car, but when I grab the...

Hey guys, I have some quick questions. So back story, I just bought a 1965 valiant with a 225 slant 6. The guy I bought it from said that the original motor blew up, and that he had dumped a truck slant 6 into the valiant as a replacement. Now he told me that he had rebuilt it, which I come to...