Search results for query: *

Hello all, Swapping a833s in a 1965 dart. I removed the transmission yesterday, and had some struggles getting the upper left (drivers side) transmission to bellhousing bolt out. There is some floorpan sticking out into the 4 speed hump that I’ll either move or cut. Just curious if any of...

I badly need to patch floors in my 1965 dart. Came across a full set of 67+ Laysons a body floor pans for a good price. I know they aren’t an exact fit, and especially because I have the 4 speed hump, will likely need extra massaging. However, it should be a decent start—I’ll take it one step at...

$185 (plus shipping): aluminum slant six bellhousing with dust cover, bellhousing to engine brace, clutch fork, fork pivot, and seals. Located near Modesto, CA.

Hello FABO, I am listing an iron case A833 o/d transmission with 308 front bearing (5.125” input bearing retainer). Includes: -aluminum slant six bellhousing with dust cover, -bellhousing to engine brace, clutch fork, fork pivot, seals -driveshaft (~56” center to center) I pulled the...

Hope everyone is having a great weekend. I’ve decided to try my hand at rebuilding an a833. I’m equipped with the Passon book, service manual, YouTube, etc. So far, not bad. Big question at the moment: Can you help me gauge what good/bad synchro teeth look like? So far, on the 3-4 set, i don’t...

I pulled this off my slant 6. I was running an Autolite 2100 on a one-barrel intake. Always figured it was some hot-rodder special, custom, one-off, cobbled together adapter. Was surprised to see a part number (SP615) stamped underneath. I haven’t been able to find anything on it. Anyone...

Good evening—the gas pedal and floor bracket in my v8 65 Dart was rotted out and essentially gone by the time I got the car. I was digging through my parts, and found what looks like a v8 pedal, but no bracket. Is it possible to pull the two apart? Kind of looks like the pedal and bracket don’t...

Good evening all, Doing some work on my rear drums. 8 1/4” rear with 10” brakes. Probably from a 75/76 dart. Currently installed in a 65 dart. I got a hardware kit, new shoes, and new drums. Most of the hardware kit has been installed. I’m having an issue on the front brake shoe, where the...

Hi all, having some issues getting my 1965 with recently installed 273 tuned. Details: - HIPO 273. Domed pistons. Unknown if it’s ever been taken apart. Assuming 10.5:1 compression. A833 behind it. - Original Carter AFB - Fresh gas (pretty certain I went with 87 octane though) and new fuel...

Clean chrome 273 CAP air cleaner. Top only. Good, but not perfect condition. Tried to take detailed pictures to give an accurate representation. Asking $150 + shipping from 95380.

For sale is a black 1965 console in good shape. Some minor pitting on trim and miscellaneous scuff marks. Slide is there, but is torn. Asking $110 plus shipping from 95380.

Selling a 1965 273 4 barrel intake manifold. Part number 2465726. This intake will fit on 1964-1965 273 heads only. I spent some time cleaning it up, but it could use a little bit more elbow grease…I’m just setting the expectation that it’s not absolutely pristine. Asking $275, plus...

1967 and up 273 Manifolds. Part #s: - Both driver’s sides: 2780945 - Passenger’s side: 2843953 Prices are: $35 for one driver side by itself $55 for a driver and passenger set $70 for all Shipping is on buyer. Or we can arrange local pickup.

Early A 273 Manifolds. Part #s: 2465847, 2465769 Asking $125 plus shipping. No apparent cracks or issues. Painted silver/grey at some point. Happy to answer any questions.

Motor mounts came off a 273 from a 1967 Dart. I’ll throw in the Made in Korea biscuits for free. Asking $40 plus shipping from 95380. Please let me know if you have any questions.

Dual point Prestolite distributor, part number 2444853. Includes cap, and two rotors (one labeled “Made in USA”). The box with cap and Made in USA rotor came from Mitchell Motor Parts in Columbus, Ohio in 1993 or so. There’s no receipt in the box, but my guess is that the cap and rotor were...

Just pulled this unit out of my car. Anyone familiar with these? Dealer installed? I have a feeling this showed up late in the game when a previous owner swapped a bunch of parts from a 75 A Body.

I wonder if this one’s in the registry… 1966 D -dart. 1 of 50 - cars & trucks - by owner - vehicle...

Looking for people’s favorite graphics on drag cars. I’m specifically thinking caricatures, not wording. For example, 1966 Dart Newcomer, 1966 Valiant Hairy Canary.

Working on a 1967 273, and need to put a pilot bushing in. The bushing I got from the clutch shop is not the same on both ends. They had placed the more beveled end facing out of the motor on the alignment tool. Is this how it should go? I’m assuming it makes a difference… As always, appreciate...

Has anyone seen or used Eastwood’s MIG 90? Looks similar to their MIG 140, but smaller. https://www.eastwood.com/eastwood-90-amp-mig-welder.html May be a decent option to have a true MIG machine for a beginner doing sheet metal work without a big financial commitment. Otherwise, I’m looking at...

Hello FABO, Hoping to get some help confirming that I have a 1963 Dart rear window. Previous owner pulled the window, and marked it. I have a spare 64-66 window to compare it to. (See pictures). The tinted window is the later one. The markings show on AS2 82. As far as I can tell, that’s not...

Dual point Prestolite distributor, part number 2444853. Includes cap, and two rotors (one labeled “Made in USA”). The box with cap and Made in USA rotor came from Mitchell Motor Parts in Columbus, Ohio in 1993 or so. There’s no receipt in the box, but my guess is that the cap and rotor were...

Early A 273 Manifolds. Part #s: 2465847, 2465768 Asking $125 plus shipping. No apparent cracks or issues. Happy to answer any questions.

Trying again before modifying a slant 6 flywheel.. I’m in need of a 122 tooth flywheel that will be used on a 273. Thank you!

Early A 273 Manifolds. Part #s: 2465847, 2465768 Asking $125 plus shipping. No apparent cracks or issues. Happy to answer any questions.

FABO, I’m looking for a 122 tooth flywheel for a 273. Preferably on the west coast for shipping reasons. Thank you!

I do NOT intend for this to be a for sale thread… I have a local yard with a TON of old cars. Just heard they’re crushing everything. A bodies, B bodies, etc. Of course, I need to get some confirmation…but will update the crew as I find out more… Valley Auto Wreckers, Turlock, CA. Cars have...

For sale is a black 1965 console in good shape. Some minor pitting on trim and miscellaneous scuff marks. Slide is there, but is torn. $125 plus shipping.

For sale is a 1966-1967 273 4 Barrel Intake with CAP, shows #2536771. Will include thermostat housing and carb studs. $120 plus shipping.