Search results for query: *

Started up the Valiant this weekend for the first time this year. Looking for issues I found another spark plug wire shorting out the end of the boot to the hex on the plug. Pulled the plug and the ceramic is cracked. This is the 3rd AR3910 plug that has done this. Seems odd. WTF. Have and MSD7...

Here's the ****....can't believe it's on clearance. This **** flies off the shelf!

Having a real hard time getting a Super Victor 2815 to fit on a set of Edelbrock heads. Finally clearance enough to get the valve covers on ,with doubled up gaskets....but can't get the bolts in on the #3 and #6 intake holes in the head. Trying studs on those 2 but was considering putting a slot...

Milodon 31470 dual swinging pick up 9 quart pan. Says fits 65 up B bodies which they sold me for my A body.......presently going for 650 bucks...dyno time only as it didn't work in my 66 Valiant. 300 bucks plus freight. I accept PayPal and am in Massachusetts.

I have 12 tall studs which would be BB but you can use 10 for an LA cover. Used but usable. I'm in Medway MA 02053 I accept PayPal and would like to get 50 (or BRO) plus shipping . Havent seen any of these in a while.

I have a Mr Gasket Vertigate shifter and bracket for a B body. I am looking for the install kit 373-8182. Levers and rods. Levers are 8028, 8029 and 8006. I am in Mass and can do paypal.

As stated I found a purple mist on the secondary bowls of my 950 XP. Is fuel sloshing up the bowl vent and getting blown back through my air filter? Just noticed this. I do run purple fuel. Anybody seen this before?

Ok ....personal pet peeve. It's always been a chuck and I started seeing people refer to a removable third member as a chunk. Where did this come from? WTF is a chunk? I've always thought that people were just misinformed but now it seems like chunk is ok. It's a chuck no? Destroyed into...

I had an AR207 alternator bracket set up to mount the usual small 93 mm nippondenso alternator on an AR Engineering motor plate for my RB in my Valiant. I had an LActrical 50amp. Well I've upgraded my radiator and fan assembly and am now drawing 38 amps on the fans alone. The old alternator...

This is a slightly used set up. $200 plus freight. I accept PayPal and have the original box but no paperwork or instructions. This Is for.like 2012 to 2018? 6.4 Challenger/Charger. Slight ding in the filter (turn it down so you don't see it. Presently on BO.

Oil change. So yesterday was probably my last weekend run at New England Dragway. I'll be storing the car for the winter I usually put a 50/50 mix of green coolant in and put the battery in my basement on a shelf. I'm in Mass and it'll be cold in my unheated garage. My question is should I...

I need a working 64 Dart fuel gauge. I've ordered an electronic cluster voltage regulator so that part doesn't need to function but I need a good fuel gauge. I can tell you how to test it if you've got anything. I need the one on the left.

Is there a screw on the middle of the connector? Or is it just keyed so it only goes on 1 way? I did all the bulbs and now the fuel and temp gage don't work.

I need a plate light assembly for a 1964 Dart GT.. Presently just a 67 bulb on socket hanging down. If you don't have one for sale please pm me a picture of what I should be looking for. Thanks.

Someone replaced the negative cable on our newly acquired 64 Dart GT 225 vert. There is no small ground wire to the radiator support or a ground strap between the block and firewall. I ran a ground to radiator support but am unsure as to where a block ground strap should go. Did these early As...

Picked up this 1964 Dart GT convertible today! 225 Charger HP engine. Have the window sticker, hand written sales slip, build sheet and dealership invoice. The owner traded in a 58 Coronet convertible for which he got 688.25! This car has power steering, 6.5 by 13 tires,radio package, heater...

So besides a little fan anybody have any suggestions to kill some of the heat inside my car? I have a 9.9 firesuit collar and helmet on and I'm melting waiting in the staging lanes. Shiney silver heat mat stuff? What works? What do you guys use/do? Looking for suggestions. Please.

Someone I know asked me if I had any spare sure grip assemblies for sale. I found this while looking. He's gonna use it. But as these don't seem to be available anymore I figured I'd post a picture! Also have a 3.58 gear set dated Jan 1961. Not 3.55s! The pinion gear is 1 3/8 so 657 or 741.

I've got a video of this run and about 20 feet out there's tire smoke. I think that's when the soft locker engaged but I'm not sure. It was so hot and humid. My mph was down a bit but my 60 foot time was better. Decent light too. my car is 5284. 528 Cid 4 bbl

So we sold the kids Duster about 3 years ago and it's found its way back to me to have a bigger solid cam installed. When I put the current 268S 10 Comp in I did the spring swap break in procedure and no problem. That was probably 7 years ago. Anyway the new owner saw my cam recommendation and...

I have a brand new set that has all 16 ball/ball hollow oil through 5/16 pushrods to mount a magnum head on an LA block..I would like $60 plus freight. Still in a sealed oily bag. I accept PayPal and can ship out asap from Massachusetts.

My white window marker had leaked out. I borrowed some from the guy next to me. Went on a bit light but dried darker. A bit runny. The stuff wiped right off with a dry piece of paper towel! Good stuff. Didn't get the brand. I've often had a hard time getting the marker off. Anybody know the...

Nostalgia type drags this Sunday! I'll be there as will my wife with camera. Any members please stop by and say hello . Usually parked on the grass . Looking to go some rounds! I'm going to short shift as I'm not chassis certified yet and the car is now running over 135. Custom window net should...

Are they going to let me run my non street 10 second Valiant tomorrow night? I called but they were closed at 410. It has "exhaust" no wipers no head lights but taillights

My fuel pressure has been dropping after 20 minutes of run time. The vac/boost nipple on the top doesn't hold vac. I assume this is an indication of a leak in the diagram. Does that port hold vacuum? 8AN front to back 100/10 micron filters both repla ed and Aeromotive 11203 pump. Voltage and...

I am looking for a pair or seals on the B pillar by the top edge of the body and rear window. I believe this is what they are. Used with mounting screws is fine. I can do PayPal. Please see the picture.

I am changing up some bars in my car and am going to change my seat. Before I spend money that I don't really have on a 55 series kirkey I was wondering if anyone uses a Polyethylene style double wall seat like a Jegs 555-70250? Is this seat OK for a chassis certified car?

I am looking for a lower door hinge for my 66 Valiant Signet 2 door. Please PM me if you have a good one available! Thanks in advance.

I have an NOS wiper link for a 2 speed wiper set up. This was purchased for a 73 Duster. No longer available, it is about 23 inches long and has 2 bushings installed. Brand new Id like to get 75 USD plus freight. I take PayPal and can ship it out asap. I believe this fits B bodies 72 up as well...

I've got a 3 and 5/8 tall ,8 inch round by 5 1/8 holley base. I need another. Can only find 5 inch and taller. Anybody have an old one like mine? I can send payment by PayPal. Shipping to 02053 Mass please. PM me. Thanks FABO