Search results for query: *

Wanting to buy an old-school Direct Connection air cleaner. Willing to buy any condition as long as it is useable.

Hey guys, my 1972 Duster is in the shop for paint and I’m trying to refurbish my taillights. Now im looking for the seal that seals lens to housing and all im finding is the gasket that goes on the tail panel to seal the tail light. Any ideas where to buy the piece im looking for?

Hey Guys, Working on my 72 Duster that I just purchased and it came disassmbled as it was being prepwped for paint. The hood hinges are off the car and I want to reinstall them but have none of the hardware to install them. Anybody able to tell me what size bolts or other pieces I will need to...

Looking to see whats out there for 4 Speed cars, would prefer a driver but could be a project. Not wanting to break the bank atm. Let me know and see what you got!

Hello I am looking to upgrade my rear end to the 8 3/4 was thinking of shortening a different body rear end and using a big bolt pattern. Will the brake assembly from a small bolt pattern work with the big bolt pattern axles or would I need to buy new brake assembly?

Hey in my 69 Cuda I was able to get the engine running and the car drove decently over to a buddies house (idle was very high), now when I tried to take the car home it will drive fine for a bit then starts to die when putting in gear. I’ve read the forums and seen all sorts of different answers...

Finished up the front suspension on my 69 Barracuda and checked the brake lights and other lights the brake light and turn signals do not work. Running lights do come on. What could possibly be my problems? New to older cars, Thanks in advance.

Hello all my 69 Barracuda fastback is missing seats and I believe it was a bench seat car it only has 4 holes and I believe the bucket seat was 8. Would this seat fit into the car it is supposedly from a 69 Dart.

How’s it going all, found a really nice bench seat for my Barracuda in Texas that’s a good deal thought I had a friend that could bring it out but has not been going since COVID began. What’s the best and cheapest way of having the seat shipped

My 1969 Barracuda fastback is my project vehicle that I plan on eventually V8 swapping but for the time being it seems like the /6 runs good and should make a decent driver, however the motor mounts are shot and the motor flops around like a fish out of water. Anyways I was wondering if someone...

I want to begin with the fact that brakes are a big nemisis and this is why I hate messing with them. Installed a disc brake conversion kit on the front of my 69 Barracuda and the brake lines are in need of a switch also so I went ahead and purchased some pre bent lines from Right Stuff (Part...

Just about finishing up a front discbrake conversion and replaced all steering components along with new bushing and qa1 upper control arms. My question is what should be tightened once the car is on wheels and what needs to be tightened beforehand. New to Mopars, Thanks in advance.

Installed the driver side lower control arm and when moving on to the passenger side it seems that I have lost one of the bushings for the strut rod, decided to just try and purchase another bushing kit just for the one after looking and somehow within 2 weeks all auto parts stores as well as...

Rebuilding the front suspension on my 69 Barracuda and was able to remove the old bushings as well as the pin/bolt that takes the nut on the k member. What is the method for reinstalling the pin into the bushing or should the bushing be pressed in before the pin is pressed in. Thanks in advance.

Hey guys rebuilding the front suspension on my 69 Fastback and bought a disc brake conversion kit from POL also changes from SBP to BBP. Now I need to swap the MC and Proportioning valve. What MCshould I purchase if wanting to keep manual breaks and drums in the back with 8 3/4 drums. Also...

Taking apart my 69 Barracuda suspension and everything has been going decently up until the torsion bar on the drivers side. I was able to take off the passenger side with relative easy and now on the driver side I have everything removed the strut rod nuts, k member but for LCA and the c clip...

Doing a front disc brake swap on my Barracuda and need a proportioning valve, anybody got something lying around they willing to part with if not can someone point me in the direction of where I can purchase a new one. Thanks in advance.

Took apart my 69 Barracuda front suspension to see that my front strut rods are bent. Looking to see if anybody has any laying around they are willing to part with. Checked for new online and only really saw the qa1 but they are a little pricey. Thanks in advance.

In search of a 69 Fastback trunk latch or if not available, does anyone know where I can get reproduction pieces. Want to paint the interior but don't want to keep having it get dirty from sitting outside and having trunk open. Thanks in advance.

Looking for an A body 8 3/4 housing with axles, does not have to have the brakes but would prefer. Wanting to swap out the dinky 7 1/4 on my 69 Barracuda fastback and prefer the shorter A body 8 3/4 because the car has been tubed and wanting to fit some big meets on the back.