Search results for query: *

Does anyone know if the inner portion of the bearing and keeper are tapered or can they go on in any direction? I have Centric 411.64000 bearings. Thank you

I switch to a super six intake and Carter BBD looking for a Super Six air cleaner first or one from a V8 that fits the BBD's 2-5/8" throat. Thank you, Jay

Would take just the bracket for the accelerator cable if you only have that. Also looking for the return spring bracket.

I will be swapping my stock 66 Dart's 1 barrel manifold to a two barrel super six manifold and Carter BBD. I read a different pedal is required since the BBD uses a cable for the throttle. The person I bought the manifold off of had this pedal from the same car, 73 or 74 duster. Does this look...

Hello, I will be converting my 1966 Dart 225 slant 1 barrel intake to a super six intake. I had some questions. I have read you need a gas pedal from an early model V8 a-body to replace the current rod style, these are somewhat hard to find, is there another option like a universal cable style...

Looking for a super six manifold for my 66 225. Live outside of Philly and am willing to pick up within reasonable distance. Shipping could also be an option if you have on and are willing. Thank you.

Back bumper, no brackets. Driver's quality rear bumper from 1966 Dart. Has pitting and spots that are rusty but no holes. overall it is straight except for one spot near the license plate area that was pulled on at one time to move the car and that area is pulled out a bit. Can probably be...

Looking for new roof rail seals, a couple of places I checked are over $250 for both. Seems way overpriced to me. Does anyone know of a more economical resource for these seals? These are the seals that the windows rest against at the top to seal out water. $250 seems ridiculous I just got a...

Yes it's me and my 66 Dart GT again. I want to remove my GT emblems as shown in the yellow square in the photo. I believe that the emblems are held on with nuts from the back. Is it possible to get to the back of the emblems/bages without removing the headliner? I was hoping that perhaps one...

Good morning, I'm having an issue with my passenger door. It is rubbing and binding at the top. The gap needs to be adjusted. The gap at the rear of the door looks good. So I assume I may need to adjust the fender out a bit. I'm not certain how much I have to disassemble the fender to move it...

My 66 Dart had swedged lugs to the drums. The old drums were toast and I removed the drums from the hub via drilling. The new drums I purchased hit the bottom knurled section of the new studs I purchased, Dorman 610024 (they hit the old studs as well). Meaning the drum cannot sit flush against...

I have a 1966 Dart with a 225 slant six, the car did not have an alternator when I got the car so I bought one from NAPA. There are two wires near the alternator area. One is a round hole post connector, the other is a spade connector. The alternator has three connections, 1 is a post connector...

Hi Guys, I am trying to separate a quarter panel patch I bought. It's from a scrap car and has been cut with the trunk extension attached to the outer skin. My first thought was to drill out all the spot welds but as I was starting to do this I thought perhaps I should get suggestions from more...

This morning I was adjusting my new electric choke (choke is now disconnected for troubleshooting reasons). After adjusting rod to make sure the choke flap fully closes I went to start the car. No start - First thought was I ran the battery down but I checked and the battery has power. Choke was...

I know there are a lot of tire size questions here and I've read a lot but wanted opinions on my exact situation. I don't want any rubbing issues but also want to fill in the wheel wells a bit but the same size all around. I want to stay within safe size on wheel ratio. 1966 Dart Small Bolt...

As seen below on car, one wheel is white, others are black. Trim rings are new, caps are older but in good shape. Tires hold air and can be used for a roller, but I have used them on the street (short trips), they have good tread but unsure of overall condition. Pickup only Philly suburbs 19002...

Does anyone have a photo the can post of the proper orientation of the 1231 electric choke on their actual engine. Mine is a 66 225 engine. I assume I have it oriented correctly with the contacts facing the front and the rod facing the firewall, but as they say a picture is worth a thousand...

Hi, Near Philadelphia area. Looking for (4) used 14 inch tires to hold me over until I can re-tire. Car is not a daily driver but the tires need to be safe. They will be mounted on SBP stock Rallye wheels. I can't afford ne tires at the moment so looking for a bargain. 205/70-14 was what I'm...

Both outer and inner tail lights from a 66 Dart GT but I believe they fit prior years, chrome pitted, but no cracks that I can see. $160.00 and ships from 19002 or local pickup. Shipping paid by buyer.

Driver's quality headlight bezels for 1966 Dodge Dart. This is both sides and have blemishes and dents. $40 for both ships from 19002 which is the responsibility of the buyer. Tried to show damages.

Driver's quality grill came off a 1966 Dart GT. Needs some work, has some bumps and bruises. Philadelphia area or will ship at buyers expense. $175.00

Looking for a good quality hood lip molding for a 1966 Dart GT. I have one now but it is bent and dented, maybe someone has one in better shape than mine. Also looking for both rear wheel opening moldings, and passenger's front wheel opening. The ones I have are also in sad shape as well...

Looking for budget rallye wheels, as long as they are straight I don't care about surface imperfections. These will eventually go on a 66 Dart. Near Philadelphia area. My budget is less than 50.00 per wheel.

Have a 66 Dart with a slant six and auto transmission. I think it the 904. While removing the old lines I broke the rear transmission line fitting, I was able to extract the broken bit in the transmission (thank goodness) but need to find a replacement. I estimate it is a 45 degree brass...

Decent quality 1966 Dodge Dart Grill, needs cleanup and polish. one bad area shown in photo 3. Near Philadelphia, shipping responsibility of buyer. $200 OBO. Thanks.

Hello, I'm looking for a cigarette lighter for my 66 Dart. I have the knob (the part that glows) and the housing (that sits behind the dash) , but need the socket that inserts into the housing (mine is rusted out and cracked insulation). Thank you.

Does anyone know where to obtain the insert for the in dash cigarette lighter. I have the end that lights but need the part the goes into the housing. It looks like there is a small nut that holds the insert in the housing. The insert is damaged on the one I have. Thank you Jay

Anyone know a source for the chrome winders for seat belts? They look similar to these. I have a 66 Dart GT.

I'm having an issue raising idle on my 1920. I have the idle adjustment screw bottomed out on the screw spring so so can't screw it in further. I need just a bit more rpm to stop it from stalling when I put in gear. Could the timing be off? I have it set about 2 degrees btdc. Fill confession, I...

Can't identify these 100 percent, they came inn the trunk of my 66 Dodge Dart GT. 10 inch drums, 11 inch drums? I'm not sure. Anyway see pictures. They seem to be in pretty good shape. Lug nuts not included. $100 and you pay shipping. Or $75 local pickup near Philadelphia. Feel free to make...