Search results for query: *

Looking for a 1964 Dart 270 Speedo or one that would fit the dash. Or if someone can tell me how I can fix a broken speedo needle on the gauge. Tried to glue it back together but that didn't. My current one just has the broken needle but I can't figure out if it can be replaced. If so, I could...

You wouldn't happen to have a speedometer that would fit a 64 Dart 270 for sale would you? I need one for my son's Dart Thanks Scott

Looking for replacement speedometer for 1964 Dart 270. Need le broke off of the old one and can't repair. Will possibly look at instrument panel if seller wants to sell whole unit, but really only need the speedo. thanks for any help in advance. FiberGuy

Does anyone have any ideas on how to tighten up my rear view outside mirrors? They just keep falling and I can't find any way to tighten them up on the mounts. By the way, they are the two post mirrors.

My car seems tobe sucking gas, especially on the highway. It seems I'm only getting about 12 MPG for a six cylinder engine with a single barrel carb. That seems too low to me. Can anyone give me some ideas on what might be going on. I have the stock 13" wheels, since I can't afford to change...

Looking for the rear passenger side tail light for a 1964 Dodge Dart 270 in good shape without any cracks or broken parts. Can anyone help me?

thanks. that's good advice, I will make up a piece of angle iron to do the job. Do you know what the thread count is? I tried a 3/8 eye bolt I had laying around (coarse thread) and it wouldn't thread into the mounting hole

can anyone tell me the eyebolt size I need for the lifting holes on top of the 225 slant six motor. I doesn't appear to be 5/16 (too small) and 3/8 seems too large. the best I can tell, it doesn't look like a fine thread. Any help would be appreciated

By the way my dart is a 64, so it's the shortest wheelbase

how did you lift it? Did you have to use a winch or were you able to jack it up? Is it OK to lift the engine with a block of wood under the front pulley?

do you guys have the 111" wheelbase models? in the manual it said to turn the crank on the 118" wheelbase models and it would come out, but on the smaller wheelbase, you had to lift the motor.

Can anyone give me some advice for removing the oil pan from my Dart. I have it off, but can't get it out.

I bought one of those composite gaskets from the guy in Austrailia and it looks great. Do I have to put a sealant on the gasket when I install it or does it just go on without any sealant? I looked up the original gasket and they used a sealant but it was much thinner and made from a different...

I have removed my intake/exhaust manifolds from my 225 slant six, but in the process I broke four of the studs that go into the engine block. Can anyone tell me where I can locate some replacement studs? I have checked all of the auto parts stores, but with no luck. Does anyone have any for sale?

I am in San Diego, CA. But I think I am all set. Another member I talked too a couple of weeks ago got back to me today and it looks like he can send out the one he has to me tomorrow. So I would say that shimsham1 would be the next in line. By the way, the manifold did change in '69 or '70...

This is my second attmpt to find an exhaust manifold for my '64 Dart with 225 slant six engine. Does anyone have one for sale? Thanks a lot - Fiberguy

I'm looking for an exhaust manifold that will fir my '64 dodge dart 225, not the super six - Do you still have the exhaust manifold? How much do you want for it if you do? I'm trying to get one for my kid's car. Thanks,

Thanks for all of your advice, I'm really gonna need it since I plan on replacing nearly all of the gaskets on the engine. I always had GM V-8's, got this car for my son and it seems simple, but not everything is as it seems... just like the gaskets, I would have just got the Fel-Pro kit and...

Can anyone tell me if there would any problems or adjustments that would be needed to put a exhaust manifold from a '68 Dart - 225 onto a '64 Dart 225? Should I replace both intake and exhaust manifolds at the same time? Will the original '64 intake manifold work with the '68 exhaust manifold...

Looking for an exhaust manifold for my 64 dart with a 225 cu in engine. Free of cracks or welds- Located in San Diego, CA -

can anyone tell me a good reliable online vendor to purchase a full gasket kit to overhaul my 225 in my 64 Dart. I am concerned about getting cheap crap online and a lot of the local auto parts stores seem to be pretty expensive. I need to replace all the gaskets and seals on my engine since...

thanks a lot for the info guys. I had no idea that I could take the glass out of the mirror. I appreciate the quick response. By the way, can any one lead me to a good place to pick up a gasket kit to overhaul my 225cu.in. slant six?

Does anyone know how I can tighten up the original mirrors on my 64 dart 270. There are no adjustments and they work OK until I get on the Freeway and then both of them eventually fall from the air resistance. Does anyone have a simple solution that won't damage the mirrors. They are original...