Search results for query: *

Hello, I have a 98 2.2 amigo with timing tensioner issue, per the instructions with new belt I align the pointer to the window for the NEW belt.. it took several attempts to get the mark to hold this position.. after putting about an hour on the belt... the mark stayed put.. but now its moved...

will this conversion work on a LA headed 72 360? anyone with pics.. fyi the LA heads do NOT have the same bolt holes as the magnum.. Thanks [email protected]

2000 stratus, the batt light comes and goes.. the alt was checked and ok, the batt tested ok, wiring looked ok, so far every thing looks good, charges 14.2 -14.5 volts with the dvom..I know the VR is in the pcm, but would that totaly stop charging/overcharging if the pcm was bad? also will the...

the carb in question is a 770 avenger vac secondaries. the engine is a SB 410 cid, xe274h hyd flat tappet cam 4in stroke and 4.04 bore ported 2.02 and 1.60 valves cast iron heads eddy rpm air gap intake.. long headers.. auto 904 in a dakota with 355 gears the carb has 72 jets, and what...

Hello, working on a 72 360, it has been decked bored and stroked.. anyway i do not like my cheapo adj rockers so off they come.. i have a new set of stock type stamped rockers.. now i do not want to just throw in a set of stock push rods.. so I got a PR checker from comp..Now with the 1 cly tdc...

anyone from there, I have a 68 dart 4dr that was purchaced 10/18/67 by James Husmann ( husmamn) or Husmann.. of Hoyleton IL. vin LL41f8B###### Looking for info,photos ect of the original owner and the dodge dealer in Hoyleton Il. Paul Fark & Son dealer number 54604-002 Dodge cars & trucks...

hello, 72 360,.. decked with unmiled 70-72 cc heads.. .039 head gasket.. not sure of the deck height.. any way i want to use stock style hyd rockers with shafts.. since my deck is decked id like to check the PR legnth. i set number 1 cly TDC, rotor pointing to no 1 cly...anyway i adj the rod...

Hello, on a 99 durango the tailshaft housing gasket is leaking. can the tail shaft housing be removed and a new gasket installed like on a 727??????

Hello, I have an old booster and bracket assembly from a 67 a body.. can i use it on my 68? I do not have the 67 PWr pedal and rod assembly.. can I bolt the booster and bracket assembly directly onto my 68 and use my man MC/pedal rod..

wel my MC went out on my dart, so i replaced it.. and the only one i could get was a 1-1/32 bore.. and well they suck. so i was wondering... If I went from a 1-1/32(26mm) bore MC to a 13/16 K-car(21 mm)then I will have more PSI but less volume and more pedal travel correct? if I bought a MC...

where to get one.. I need one for my 68, and the autoparts are N/A right now.. the brake system is non power disc/drum.. and a 4 stud (bolt) master cly.. should i convert to a two bolt,like from a ford or dakota. thanks Don

Anyone have the Motors labor/price guide on CD? if so what do you think of it? if you dont have a motors guide what brand do you have?

same as a 727? if so how many turns, CCW? is this the correct location?

Hello,I am working on my first 46rh a-518 out of 99 DODGE Durango 5.9. (bench build) During tear-down the front plantary gear was toast. The ALU housing was cracked, sent shaving thu out the trans, ruining the thrustwashers and bushings. Any way what would cause this to happen? is this...

anyone re-making these???

I have a 68 dart 4dr that was purchaced 10/18/67 by James Husmann ( husmamn) or Husmann.. of Hoyleton IL. vin LL41f8B###### Looking for info,photos ect of the original owner and the dodge dealer in Hoyleton Il. Paul Fark & Son dealer number 54604-002 Dodge cars & trucks w/ farm implements...

could i use it on my 68 dart with man/disc?

Hello, this iis a 89 GM 700r anyone here block off the 3-4 acc?? , how did you like it. was it harsh all the time or only on hard accel? Trans-go suggested i do this.. since my bore was scorched, I was going to sleeve it, so I called trans-go and they suggested this.. sorry i did post it on a...

Hello, what would you suggest for a overhaul kit for a 89 4x4 700r4/4l60. i was thinking of this kit # 74009B-BS Complete Service Kit, 700R4, 1987-93 Includes: Overhaul kit, Borg Warner friction clutch plates, steel clutch plates, Borg Warner band, filter, pump bushing, pump seal retainer...

do i need a special tool to remove the inner tie-rod from a 2002 4x4 dakota? thanks

if anyone has the 700r4 vid please PM me. if you were rebuilding a 700 r4 what parts would you use.. heres my list actully i got a reman kit from AZ for 14.99 KS-40 and the have 904 kits KS-20 for 10 bucks, no kidding go look on thier website K17 kit...

just currious if anyone usses them on thier carbs.. seems like a good idea, easy to change from reg gas to e85. what are your thoughts? http://www.streetsideauto.com/products.a...campaign=Become

would this be the right MC, I need a MC for a 68 dart318 with manual disc/drum this is from the AZ website.. its from a 68 dart 383 disc/drum combo Fenco Reman / Master Cylinder (Brake System) For your 1968 Dodge Dart 6.3L 2BL 8cyl </IMG> Price: $40.99 Core*Core value is...

what are the 273 hipo engine specs? real CR and real crank HP camshaft specs ect.. thanks

hello, i have a 68 dart SB, im wanting to swap to mag heads. I heard I can use mag exhaust manifolds, if i can use the Dak maifolds will the dak shorty headers work? anyone try this? please let me know if they will or not...

I have a 95 A-500 trans from a 318 dakota, whats involved to make this swap happen in my 68 dart? thanks Don

Hi all just got a call, a friend blew his rear last week. Called a few Jys and cant find a truck rear. Its a 1500 2 wd ram.. will a rear from a dodge van work? thanks, oh i thinks its the 9 1/4 but im not positive..I havent seen it yet..

Hello i want to swap my manual to pwr brakes on my 68 dart, I have a booster and brackets, the only thing i do not have is the MC and the brake pedal rod.. is the rod the same on the man and disc? if not where can i get one new or used.. should i use a 68 disc MC or a later model? thanks Don

got a problem with a 91 dodge van with an A518 (350) any way it takes a moment (a few min or so) for the transmission to engage once in gear after it sits over nite.. Kinda like the trans is empty on fluid.. but the fluid is full could it be The TC drain back/front pump? a clogged filter? VB...

Hello, I have a 68 dart 4door with the original 318 that has the orginal flat top pistons, if i swap the original heads with a pair of 89 360 heads,(i have them) approx how much would i have to mill them to keep MY cr the same, or even bring it up? These heads are about 70ccs. I may even...